chore: 源码编码GB2312统一转换为UTF-8

18个含有中文注释的.c/.h文件从GB2312转为UTF-8(无BOM)

hdl/hdl_spi4.c

@@ -7,7 +7,7 @@ void hdl_spi4_init(void)
 	
 	LL_PERIPH_WE(LL_PERIPH_GPIO | LL_PERIPH_EFM | LL_PERIPH_FCG | LL_PERIPH_PWC_CLK_RMU | LL_PERIPH_SRAM);
 
-	/* 配置SPI引脚 */
+	/* 閰嶇疆SPI寮曡剼 */
 	(void)GPIO_StructInit(&stcGpioInit);
     stcGpioInit.u16PinDrv = PIN_HIGH_DRV;
 
@@ -21,20 +21,20 @@ void hdl_spi4_init(void)
     GPIO_SetFunc(SPI4_MOSI_PORT,    SPI4_MOSI_PIN, SPI4_MOSI_FUNC);
     GPIO_SetFunc(SPI4_MISO_PORT,    SPI4_MISO_PIN, SPI4_MISO_FUNC);
 	
-	/* 配置SPI参数 */
+	/* 閰嶇疆SPI鍙傛暟 */
 	SPI_StructInit(&stcSpiInit);
 
     FCG_Fcg1PeriphClockCmd(SPI4_CLOCK, ENABLE);
     
-    stcSpiInit.u32WireMode          = SPI_3_WIRE;			//3线SPI
-    stcSpiInit.u32TransMode         = SPI_FULL_DUPLEX;		//全双工
-    stcSpiInit.u32MasterSlave       = SPI_MASTER;			//主机
-	stcSpiInit.u32ModeFaultDetect   = SPI_MD_FAULT_DETECT_DISABLE;	// 禁用模式故障检测
-    stcSpiInit.u32Parity            = SPI_PARITY_INVD;		//无奇偶校验
-    stcSpiInit.u32SpiMode           = SPI_MD_3;				//SPI模式3
-    stcSpiInit.u32BaudRatePrescaler = SPI_BR_CLK_DIV64;	//预分频
-    stcSpiInit.u32DataBits          = SPI_DATA_SIZE_8BIT;	//数据宽度
-    stcSpiInit.u32FirstBit          = SPI_FIRST_MSB;		//MSB高位有效	
+    stcSpiInit.u32WireMode          = SPI_3_WIRE;			//3绾縎PI
+    stcSpiInit.u32TransMode         = SPI_FULL_DUPLEX;		//鍏ㄥ弻宸?
+    stcSpiInit.u32MasterSlave       = SPI_MASTER;			//涓绘満
+	stcSpiInit.u32ModeFaultDetect   = SPI_MD_FAULT_DETECT_DISABLE;	// 绂佺敤妯″紡鏁呴殰妫€娴?
+    stcSpiInit.u32Parity            = SPI_PARITY_INVD;		//鏃犲鍋舵牎楠?
+    stcSpiInit.u32SpiMode           = SPI_MD_3;				//SPI妯″紡3
+    stcSpiInit.u32BaudRatePrescaler = SPI_BR_CLK_DIV64;	//棰勫垎棰?
+    stcSpiInit.u32DataBits          = SPI_DATA_SIZE_8BIT;	//鏁版嵁瀹藉害
+    stcSpiInit.u32FirstBit          = SPI_FIRST_MSB;		//MSB楂樹綅鏈夋晥	
     (void)SPI_Init(SPI4_INSTANCE, &stcSpiInit);
     SPI_Cmd(SPI4_INSTANCE, ENABLE);