#include "bsp.h" 

#ifndef _CS1237_LEFTLOW_H_ 
#define _CS1237_LEFTLOW_H_ 

#define	READ_CONFIG_CMD		0x56
#define	WRITE_CONFIG_CMD		0x65

#define	CONFIG_RST				0x0C

#define	REFO_OFF					0x40
#define	REFO_ON					0x00

#define	SPEED_SEL_10Hz			0x00
#define	SPEED_SEL_40Hz			0x10
#define	SPEED_SEL_640Hz		0x20
#define	SPEED_SEL6_1280Hz		0x30

#define	PGA_SEL_1				0x00
#define	PGA_SEL_2				0x04
#define	PGA_SEL_64				0x08
#define	PGA_SEL_128				0x0C

#define	CH_SEL_A					0x00
//#define	CH_SEL_B					0x01
#define	CH_SEL_TEMP				0x02
#define	CH_SEL_JUMP				0x03

/*Definition of conversion time corresponding to repeatability setting*/
/*
	10Hz     	//建立时间300ms
	40Hz	  		//建立时间75ms
	640Hz    	//建立时间6.25ms
	1280Hz    	//建立时间3.125ms
*/
#define tCon_10Hz			300	/* ms. */
#define tCon_40Hz			75	/* ms. */
#define tCon_640Hz		7	/* ms. */
#define tCon_1280Hz		4	/* ms. */

#define  PORT_A	  		1						//采集通道A
//#define  PORT_B	  		1						//采集通道B
#define  PORT_TEMP	   0						//采集温度
#define  PORT_JUMP	   0						//内短采集
#define	PACK_NUM		   1						//一次采集的数据包数量
#define	FILTER_NUM		0						//滤波数

typedef enum{
	LLCS1237_STATUS_IDLE,
	LLCS1237_STATUS_START,
	LLCS1237_STATUS_DELAY,
	LLCS1237_STATUS_READ,
	LLCS1237_STATUS_WAIT_READ,
	LLCS1237_STATUS_CH_SEL,
	LLCS1237_STATUS_STOP,
}LeftLowCS1237Status_m;

typedef struct{
	LeftLowCS1237Status_m Status;
	uint32_t CS1237Delay1mSCnt;
	
	int32_t AinA_AD;//AINAad数据
	//int32_t AinB_AD;//AINBad数据	
	int32_t Temp_AD;//温度ad数据
	int32_t Jump_AD;//内短ad数据	
}
LEFTLOW_CS1237Var_t;

void LEFTLOW_CS1237_Init(void);
void LEFTLOW_CS1237_IrqCallBack(void);
void LEFTLOW_CS1237DataLoopCollect(void);
void LEFTLOW_CS12371mSRoutine(void);
void LEFTLOW_CS1237Start(void);
void LEFTLOW_CS1237Stop(void);
#endif