chore: 更新子模块指针到最新提交

将子模块 Gateway_Debug 从 7e55f4c 更新到 765fe78

.qwen/skills/auto-skill-add-debug-command/SKILL.md

@@ -0,0 +1,88 @@
+---
+name: add-debug-command
+description: 在 GateWay_Debug 模块中添加新的 Debug 调试命令（函数指针表 + 字符串匹配模式）
+source: auto-skill
+extracted_at: '2026-06-15T08:10:31.194Z'
+---
+
+# 添加 Debug 调试命令
+
+本项目的 Debug 命令系统位于 `Project/GateWay/source/Module/GateWay_Debug/DebugCmd.c`，采用**函数指针表 + 字符串匹配**模式。
+
+## 修改步骤
+
+### 1. 编写 handler 函数
+
+在 `DebugCmd.c` 中添加函数，签名固定为 `void FuncName(int argc, char *argv[])`：
+
+```c
+static void DebugCmdXxx(int argc, char *argv[])
+{
+    DBG_LOG("\r\n");
+    if(strcmp(argv[1], "?") == 0) {
+        DBG_LOG("Debug Cmd: xxx\r\n");
+        DBG_LOG("  brief --> 功能描述.\r\n\r\n");
+        return;
+    }
+    // 实际逻辑...
+}
+```
+
+**必须遵循的模式：**
+- 函数体第一行：`DBG_LOG("\r\n");`
+- `"?"` 帮助分支：打印命令名和 brief 说明
+- 若修改了 `ConfigPara`，调用 `WritePara()` 保存
+- 需要被外部引用时声明为 `void`，仅内部使用时声明为 `static void`
+
+### 2. 注册到命令表
+
+在文件末尾的 `DebugFun[]` 常量数组中添加一行：
+
+```c
+const DBGFunType DebugFun[DEBUG_CMD_CNT] = {
+    // ... 已有命令 ...
+    "xxx",              DebugCmdXxx,
+};
+```
+
+**容量限制：** `DEBUG_CMD_CNT = 30`，添加前检查剩余空位（当前使用 28/30）。若超出需增大该宏。
+
+### 3. 添加到 help 输出
+
+在 `DebugCmdHelp` 函数末尾添加：
+
+```c
+len = strlen("xxx ?\r\n");
+memcpy(Data, "xxx ?\r\n", len);
+DebugAnalyze(GateWay, Data, len);
+```
+
+## 可用的关键 API
+
+| 函数 | 头文件 | 用途 |
+|---|---|---|
+| `CatOneEthSendQueue(data, len)` | CatOneTask.h | 将载荷放入网络发送队列（需 `SvrRegFlag == true`） |
+| `CommUintOrgData(GateWay, CUPara, CUData, buf)` | Public.h | 组装通讯单元传感器数据包 |
+| `GateWayRegister(TxBuff)` | CatOneTask.h | 组装网关注册包，返回长度 |
+| `NetCommOrgData(GateWay, payload, outBuf)` | Public.h | 为载荷添加网络帧头(0x7A)+MAC+CRC |
+| `WritePara(data, len)` | (bsp) | 保存配置参数到 Flash |
+| `CatOneTriggerRegister()` | CatOneTask.h | 将 Cat1 状态机立即切换到注册状态 |
+| `ETHTriggerRegister()` | CatOneTask.h | 将以太网状态机立即切换到注册状态 |
+
+## 可用的全局/extern 变量
+
+| 变量 | 类型 | 来源 |
+|---|---|---|
+| `GateWay` | `static GateWayPara` | DebugCmd.c 内静态指针，指向网关参数 |
+| `SComm1Para` / `SComm2Para` | `SensorCommPara_t` | RS485Task.c 中定义，DebugCmd.c 已 extern |
+| `GateWay->SvrRegFlag` | `bool` | 服务器注册状态 |
+| `GateWay->ConfigPara` | `GWConfigPara_t` | 网关配置参数 |
+
+## 注意事项
+
+- `CatOne_t CatOne` 和 `CatOneEthTxBuff[]` 均为 CatOneTask.c 中的 **static** 变量，不能直接在 DebugCmd.c 中访问；应使用封装好的接口函数（如 `CatOneTriggerRegister()`、`ETHTriggerRegister()`）来操作状态机
+- 重新注册应：清 `GateWay->SvrRegFlag = false`，然后根据通信模式调用 `CatOneTriggerRegister()` 或 `ETHTriggerRegister()` 立即切换状态机到注册状态，而不是仅清标志位等待状态机自动检测
+- `CatOneEthSendQueue` 内部检查 `SvrRegFlag`，未注册时返回 `false`
+- 命令解析函数 `DebugAnalyze` 按 `" "` 分割参数，去除 `\r`，最多 10 个参数
+- `DEBUG_CMD_CNT = 30` 为命令容量上限，添加新命令前需检查当前使用量，若超出需将此宏增大（如改为31）
+- 若模块需要保存独立的配置参数（如YOXO1007网络参数），可在DebugCmd.c中定义static变量，并通过Flash读写函数持久化（参考`EthNetPara_t`和`WriteEthNetPara`的实现）

.qwen/skills/auto-skill-fix-yoxo1007-receive-data/SKILL.md

@@ -0,0 +1,57 @@
+---
+name: fix-yoxo1007-receive-data
+description: 修复YOXO1007以太网模块接收数据解析错误问题
+source: auto-skill
+extracted_at: '2026-06-17T04:30:00.000Z'
+---
+
+# 修复 YOXO1007 以太网模块接收数据解析错误
+
+## 问题现象
+
+服务器已收到网关注册请求并响应，但网关端无法接收/解析服务器返回的数据。
+
+## 根本原因
+
+YOXO1007 模块在**透传模式**下发送的是**原始二进制数据**，不是 ASCII 格式的 hex 字符串。
+
+原代码错误地使用了 `AsciiToHex` 函数进行格式转换：
+
+```c
+// 错误代码 - CATONE 模式使用的 ASCII 转换不适用于 ETH 透传模式
+memset(HexData, 0x00, CatOneEthRxLen / 2);
+uint8_t ret = AsciiToHex(RxBuffTemp, HexData, CatOneEthRxLen);
+if(ret > 0)
+    GateWay->SvrRevCallBack(GateWay, HexData, ret);
+```
+
+这导致服务器返回的二进制数据被错误解析，回调函数无法正确处理。
+
+## 修复方案
+
+修改 `CatOneTask.c` 中 ETH 接收线程的数据处理逻辑，直接传递原始二进制数据：
+
+```c
+// 修改后的正确代码
+CAT1_DBG_LOG("Eth Rev: len=%d\r\n", CatOneEthRxLen);
+/* YOXO1007模块在透传模式下发送原始二进制数据,直接传递 */
+if(CatOneEthRxLen > 0)
+    GateWay->SvrRevCallBack(GateWay, (uint8_t *)CatOneEthRxBuff, CatOneEthRxLen);
+```
+
+## 修改位置
+
+`Project/GateWay/source/User/Src/CatOneTask.c` 中的 `CatOneRev_Thread_Entry` 函数内的 ETH 分支。
+
+## 关键区别
+
+| 模式 | 数据格式 | 解析方式 |
+|------|----------|----------|
+| CAT1 (4G) | ASCII 字符串 (AT 命令/响应) | 需要 AsciiToHex 转换 |
+| ETH (YOXO1007) | 原始二进制 (透传模式) | 直接传递，不转换 |
+
+## 注意事项
+
+- 此修改仅影响 ETH 通信模式，CAT1 模式的 ASCII 解析逻辑保持不变
+- YOXO1007 模块配置参数使用二进制命令协议（识别流 ED F2 A3 56...），与数据透传是不同层面
+- 模块配置保存后重启会自动进入之前保存的工作模式，无需额外进入透传模式的命令

.qwen/skills/auto-skill-git-branch-cleanup/SKILL.md

@@ -0,0 +1,79 @@
+---
+name: git-branch-cleanup
+description: 批量删除/重命名本地和远端 Git 分支，并同步远端仓库结构（含中文分支名、upstream 修复）
+source: auto-skill
+extracted_at: '2026-06-17T10:06:37.947Z'
+---
+
+# Git 分支批量清理与重命名
+
+## 适用场景
+需要删除多余的本地/远端分支、将分支重命名、并让远端结构与本地保持一致。
+
+## 操作流程
+
+### 1. 切换到安全分支
+```bash
+# 先 stash 未提交的更改
+git stash --include-untracked
+
+# 如果有 untracked 文件冲突，使用 -f 强制切换
+git checkout -f master
+```
+
+> **坑点**：中文分支名之间的文件差异可能产生大量 untracked 冲突（如 FatFS 文档等），
+> `git checkout` 会拒绝切换，需要 `-f` 强制切换，之后 `git stash pop` 恢复。
+
+### 2. 删除本地分支
+```bash
+git branch -D "LAN口通讯"
+git branch -D "新版4G模块1"
+```
+
+### 3. 重命名本地分支
+```bash
+git branch -m "旧版4G模块" develop
+```
+
+### 4. 删除远端分支（每个远端都要操作）
+```bash
+# 一次性删除多个远端分支
+git push home --delete "LAN口通讯" "新版4G模块" "旧版4G模块"
+git push origin --delete "LAN口通讯" "新版4G模块" "旧版4G模块"
+```
+
+> **注意**：远端可能认证失败（如内网地址不可达），先确认网络可达再操作。
+> 远端分支名可能与本地不完全一致（本地有 `新版4G模块1`，远端只有 `新版4G模块`）。
+
+### 5. 强制推送重命名后的分支到远端
+```bash
+git push home develop --force
+git push origin develop --force
+```
+
+### 6. 修复上游跟踪分支
+重命名后，分支仍跟踪旧的远端名（如 `origin/旧版4G模块`，已不存在）：
+```bash
+git branch --set-upstream-to=origin/develop develop
+```
+
+### 7. 恢复工作内容并切回开发分支
+```bash
+git checkout develop
+git stash pop
+```
+
+### 8. 验证最终结构
+```bash
+git fetch --all --prune
+git branch -a
+```
+
+## 常见问题
+
+| 问题 | 解决方案 |
+|------|----------|
+| checkout 报 untracked files 冲突 | `git checkout -f <branch>` |
+| 远端认证失败 | 检查网络/VPN，确认远端地址可达 |
+| 重命名后 upstream 指向已删除的远端分支 | `git branch --set-upstream-to=origin/<new-name> <branch>` |
+| 中文分支名在命令行中需加引号 | `git branch -D "旧版4G模块"` |

Netlist_GETWAY_V1.3_V1.4_2026-06-16.tel

@@ -0,0 +1,314 @@
+$PACKAGES
+bq25306rter ! bq25306rter ! '{Value}' ; U2 
+c0402m ! c0402m ! 100nF ; C9 C28 C41 
+c0402m ! c0402m ! 100pF ; C11 C42 C43 
+c0402m ! c0402m ! 10nF ; C10 
+c0402m ! c0402m ! 33pF ; C29 C30 C31 C32 
+C0603 ! C0603 ! '2.2uF' ; C59 C60 C68 
+C0603 ! C0603 ! '4.7uF' ; C65 
+C0603 ! C0603 ! 100nF ; C1 C3 C5 C15 C16 C19 C21 C23 C25 C26 C34 C36 C38 C40 ,
+        C44 C46 C48 C50 C52 C53 C54 C56 C61 C63 C64 C66 C70 C71 C76 C78 C79 ,
+        C80 C83 C84 C85 C86 
+C0603 ! C0603 ! 10uF ; C27 C55 C57 C62 
+C0603 ! C0603 ! 15pF ; C73 C77 
+C0603 ! C0603 ! 1uF ; C69 C72 C75 
+C0603 ! C0603 ! 22pF ; C67 C74 C81 C82 
+C0603 ! C0603 ! 22uF ; C58 
+C0603 ! C0603 ! 470pF ; C17 
+C0603 ! C0603 ! 47nF ; C4 
+C0805 ! C0805 ! '2.2uF' ; C13 
+C0805 ! C0805 ! 10nF ; C24 
+C0805 ! C0805 ! 22uF ; C2 C8 C12 C18 C20 C33 C35 C39 C45 C47 C49 C51 
+C1206 ! C1206 ! 22uF ; C14 C37 
+CAP-SMD_BD6.3-L6.6-W6.6-FD ! CAP-SMD_BD6.3-L6.6-W6.6-FD ! 470uF ; C6 C7 
+CAP-SMD_BD6.3-L6.6-W6.6-LS7.3-FD ! CAP-SMD_BD6.3-L6.6-W6.6-LS7.3-FD ! 220uF ; ,
+        C22 
+CONN-TH_2P-P2.50_HX25003-2A ! CONN-TH_2P-P2.50_HX25003-2A ! '{Value}' ; CN1 
+CONN-TH_2P-P3.81_L7.4-W7.6 ! CONN-TH_2P-P3.81_L7.4-W7.6 ! '{Value}' ; U1 U9 ,
+        U11 U13 U15 
+,
+        CONN-TH_3P-P2.00_HCTL_PH-3A_C2908624 ! CONN-TH_3P-P2.00_HCTL_PH-3A_C2908624 ! '{Value}' ,
+        ; CN3 
+CONN-TH_4P-P2.00_PH-4A_C2908625 ! CONN-TH_4P-P2.00_PH-4A_C2908625 ! '{Value}' ,
+        ; H4 
+,
+        CONN-TH_7P-P1.25_HCTL_HC-1.25-7A ! CONN-TH_7P-P1.25_HCTL_HC-1.25-7A ! '{Value}' ,
+        ; CN2 
+CONN-TH_PH-2A_C2908623 ! CONN-TH_PH-2A_C2908623 ! '{Value}' ; H1 
+CRYSTAL-SMD_4P-L3.2-W2.5-BL-2 ! CRYSTAL-SMD_4P-L3.2-W2.5-BL-2 ! '{Value}' ; ,
+        U21 
+DO-214AC_L4.3-W2.4-LS4.7-RD ! DO-214AC_L4.3-W2.4-LS4.7-RD ! '{Value}' ; D1 
+E32-400M30S ! E32-400M30S ! '{Value}' ; U12 
+,
+        ESOP-8_L4.9-W3.9-P1.27-LS6.0-TL-EP ! ESOP-8_L4.9-W3.9-P1.27-LS6.0-TL-EP ! '{Value}' ,
+        ; U4 
+FC-135R_L3.2-W1.5 ! FC-135R_L3.2-W1.5 ! '32.768kHz' ; X1 
+HDR-TH_2P-P2.54-V-M ! HDR-TH_2P-P2.54-V-M ! '{Value}' ; H5 
+HDR-TH_3P-P2.54-V-M ! HDR-TH_3P-P2.54-V-M ! '{Value}' ; H2 H3 
+IND-SMD_L2.5-W2.0_AHP252010TF ! IND-SMD_L2.5-W2.0_AHP252010TF ! 10uH ; L2 L4 
+IND-SMD_L4.8-W4.5 ! IND-SMD_L4.8-W4.5 ! '2.2uH' ; L1 
+IND-SMD_L7.0-W6.6_FXL0630 ! IND-SMD_L7.0-W6.6_FXL0630 ! 15uH ; L3 L5 
+IPEX-SMD_BWIPX-1-001E ! IPEX-SMD_BWIPX-1-001E ! '{Value}' ; RF1 
+L0603 ! L0603 ! '{Value}' ; L6 
+LED0603-FD_BLUE ! LED0603-FD_BLUE ! '{Value}' ; LORA 
+LED0603-RD ! LED0603-RD ! '{Value}' ; LAN LED1 
+,
+        LQFP-64_L10.0-W10.0-P0.50-LS12.0-BL ! LQFP-64_L10.0-W10.0-P0.50-LS12.0-BL ! '{Value}' ,
+        ; U20 
+NANO-SIM-SMD_SMN-305-ARP7 ! NANO-SIM-SMD_SMN-305-ARP7 ! '{Value}' ; CARD1 
+NT26E ! NT26E ! '{Value}' ; U19 
+OSC-SMD_4P-L3.2-W2.5-BL ! OSC-SMD_4P-L3.2-W2.5-BL ! 16MHz ; X2 
+,
+        QFN-48_L5.0-W5.0-P0.35-EP3.7_UC8288 ! QFN-48_L5.0-W5.0-P0.35-EP3.7_UC8288 ! '{Value}' ,
+        ; U17 
+R0402 ! R0402 ! '100kΩ' ; R5 R34 R41 R42 R44 
+R0402 ! R0402 ! '10kΩ' ; R2 R15 R23 R35 R37 R38 R39 R40 R43 R45 R55 R75 
+R0402 ! R0402 ! '1kΩ' ; R18 
+R0402 ! R0402 ! '22Ω' ; R25 R26 R30 
+R0603 ! R0603 ! '100kΩ' ; R13 R19 R57 R72 
+R0603 ! R0603 ! '100Ω' ; R56 
+R0603 ! R0603 ! '10kΩ' ; R10 R11 R14 R47 R50 R51 R54 R59 R63 R64 R65 R66 R67 ,
+        R68 
+R0603 ! R0603 ! '120kΩ' ; R73 
+R0603 ! R0603 ! '120Ω' ; R49 R52 
+R0603 ! R0603 ! '12kΩ' ; R22 R36 
+R0603 ! R0603 ! '169kΩ' ; R7 R28 
+R0603 ! R0603 ! '1kΩ' ; R1 R4 R8 R12 R29 R58 R69 R70 R74 
+R0603 ! R0603 ! '1MΩ' ; R17 
+R0603 ! R0603 ! '2.7kΩ' ; R61 
+R0603 ! R0603 ! '200kΩ' ; R16 R71 
+R0603 ! R0603 ! '24kΩ' ; R46 
+R0603 ! R0603 ! '3.24kΩ' ; R31 
+R0603 ! R0603 ! '3.3kΩ' ; R6 R21 
+R0603 ! R0603 ! '30kΩ' ; R3 
+R0603 ! R0603 ! '330kΩ' ; R20 
+R0603 ! R0603 ! '4.7kΩ' ; R60 R62 
+R0603 ! R0603 ! '64kΩ' ; R9 R27 
+R0805 ! R0805 ! '100kΩ' ; R53 
+R0805 ! R0805 ! '10kΩ' ; R24 R33 
+R0805 ! R0805 ! '1kΩ' ; R48 
+R0805 ! R0805 ! '20kΩ' ; R32 
+RJ45-TH_HR915310A ! RJ45-TH_HR915310A ! '{Value}' ; D7 
+,
+        SC-70-6_L2.2-W1.3-P0.65-LS2.1-BL ! SC-70-6_L2.2-W1.3-P0.65-LS2.1-BL ! '{Value}' ,
+        ; U22 U23 
+SMA_L4.3-W2.6-LS5.1-RD ! SMA_L4.3-W2.6-LS5.1-RD ! '{Value}' ; D3 D4 
+SOIC-8_L5.0-W4.0-P1.27-LS6.0-BL ! SOIC-8_L5.0-W4.0-P1.27-LS6.0-BL ! '{Value}' ,
+        ; U10 U14 
+SOIC-8_L5.3-W5.3-P1.27-LS8.0-BL ! SOIC-8_L5.3-W5.3-P1.27-LS8.0-BL ! '{Value}' ,
+        ; U18 
+,
+        SOT-223-3_L6.5-W3.4-P2.30-LS7.0-BR ! SOT-223-3_L6.5-W3.4-P2.30-LS7.0-BR ! '{Value}' ,
+        ; U8 
+SOT-23 ! SOT-23 ! '{Value}' ; D5 D6 
+SOT-23_L2.9-W1.3-P1.90-LS2.4-BR ! SOT-23_L2.9-W1.3-P1.90-LS2.4-BR ! '{Value}' ,
+        ; Q1 Q2 Q3 Q4 Q7 Q15 Q17 
+,
+        SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR ! SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR ! '{Value}' ,
+        ; Q5 Q11 Q19 
+,
+        SOT-23-3_L2.9-W1.6-P1.90-LS2.8-BR ! SOT-23-3_L2.9-W1.6-P1.90-LS2.8-BR ! '{Value}' ,
+        ; Q6 
+,
+        SOT-23-3_L3.0-W1.7-P0.95-LS2.9-BR ! SOT-23-3_L3.0-W1.7-P0.95-LS2.9-BR ! '{Value}' ,
+        ; Q18 
+sot-23-3p ! sot-23-3p ! '{Value}' ; Q8 Q9 Q10 Q12 Q13 Q14 
+,
+        SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL ! SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL ! '{Value}' ,
+        ; U3 U6 
+,
+        SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BR ! SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BR ! '{Value}' ,
+        ; U7 
+,
+        SOT-363_L2.0-W1.3-P0.65-LS2.1-BR ! SOT-363_L2.0-W1.3-P0.65-LS2.1-BR ! '{Value}' ,
+        ; D2 
+SOT323-6L_L2.0-W1.3-LS2.1-BL ! SOT323-6L_L2.0-W1.3-LS2.1-BL ! '{Value}' ; U16 
+TF-SMD_XKTF-1307-18 ! TF-SMD_XKTF-1307-18 ! '{Value}' ; CARD2 
+,
+        TO-263-5_L10.2-W9.9-P1.70-LS14.4-TL ! TO-263-5_L10.2-W9.9-P1.70-LS14.4-TL ! '{Value}' ,
+        ; U5 
+$A_PROPERTIES
+$NETS
+'$1N14156' ; R32.1 R33.1 U5.5 
+'$1N15120' ; C16.2 L2.1 U3.6 
+'$1N15124' ; C16.1 U3.1 
+'$1N156972' ; R61.2 U20.55 
+'$1N157217' ; LORA.2 R61.1 
+'$1N219298' ; Q3.1 R6.2 
+'$1N219301' ; Q7.1 R21.2 
+'$1N219303' ; Q6.3 R8.1 R19.2 
+'$1N219304' ; D1.1 R1.1 R10.1 
+'$1N219315' ; Q4.1 R8.2 
+'$1N219322' ; R11.2 R14.2 U2.7 
+'$1N219324' ; R16.2 U2.8 
+'$1N219325' ; C17.1 R16.1 R20.2 U2.9 
+'$1N219326' ; R17.1 R20.1 
+'$1N219329' ; C4.1 L1.1 U2.13 U2.14 
+'$1N219330' ; C5.2 C14.2 C17.2 CN1.1 L1.2 Q7.3 R17.2 U2.10 
+'$1N219388' ; Q3.3 U1.2 
+'$1N219660' ; Q6.1 R10.2 
+'$1N219673' ; C15.2 Q3.2 Q4.2 Q6.2 R1.2 
+'$1N219967' ; H5.2 R72.2 R74.2 U22.6 U23.6 
+'$1N220337' ; Q2.1 R12.2 R13.2 
+'$1N220644' ; H2.2 R22.2 U3.3 
+'$1N220659' ; H2.1 R9.1 
+'$1N220661' ; H2.3 R7.2 
+'$1N220812' ; H3.1 R27.2 
+'$1N220814' ; H3.3 R28.2 
+'$1N220820' ; H3.2 R36.2 U6.3 
+'$1N232426' ; C4.2 U2.15 
+'$1N232428' ; R3.2 U2.4 
+'$1N25321' ; C24.1 U4.1 
+'$1N25347' ; C24.2 D3.1 L3.1 U4.8 
+'$1N25981' ; R24.1 R31.2 U4.4 
+'$1N27457' ; C25.1 U6.1 
+'$1N27465' ; C25.2 L4.1 U6.6 
+'$1N27856' ; D4.2 L5.2 U7.1 
+'$1N27899' ; R46.1 R48.2 U7.3 
+'$1N284612' ; H4.2 R29.1 
+'$1N284617' ; H4.1 Q11.3 
+'$1N284675' ; Q11.1 R44.2 R45.2 
+'$1N284885' ; C3.2 C12.2 Q4.3 R12.1 U2.1 
+'$1N284896' ; R4.2 U2.3 
+'$1N284900' ; H1.2 R4.1 
+'$1N284903' ; C13.2 H1.1 R11.1 U2.2 
+'$1N285302' ; C54.2 C55.2 C56.2 C57.2 Q15.3 U12.9 U12.10 
+'$1N292841' ; Q15.1 Q19.3 R53.2 
+'$1N292934' ; Q19.1 R55.2 
+'$1N299251' ; H4.4 U4.7 
+'$1N330138' ; Q1.1 Q5.3 R5.2 
+'$1N330143' ; Q5.1 R2.1 
+'$1N330213' ; C58.2 C62.2 Q17.3 Q18.2 U16.5 
+'$1N330234' ; Q17.1 R57.1 R58.2 
+'$1N35056' ; Q9.1 R40.1 R41.2 
+'$1N35060' ; Q9.3 U19.20 
+'$1N35062' ; R26.2 U19.12 
+'$1N35065' ; R30.2 U19.13 
+'$1N35068' ; R25.2 U19.11 
+'$1N35087' ; LED1.1 Q8.3 
+'$1N35088' ; Q8.1 R15.1 
+'$1N35089' ; LED1.2 R18.2 
+'$1N35110' ; Q10.1 R34.2 R35.1 
+'$1N35118' ; Q14.1 R42.2 R43.1 
+'$1N35136' ; C43.2 Q13.1 R38.2 
+'$1N35141' ; C42.1 Q12.1 R37.1 
+'$1N35148' ; C6.1 C7.1 C8.1 C9.2 C10.2 C11.2 Q1.3 U19.45 U19.46 
+'$1N36133' ; LAN.2 U17.21 
+'$1N36222' ; C68.2 U17.33 
+'$1N36366' ; C59.1 L6.1 U17.1 U17.2 
+'$1N36373' ; C66.2 L6.2 U17.35 
+'$1N36810' ; C67.2 U17.32 U21.3 
+'$1N36815' ; C74.2 U17.31 U21.1 
+'$1N37705' ; Q18.1 U16.3 
+'$1N39412' ; C80.2 U20.30 
+'$1N45053' ; LAN.1 R62.2 
+'$1N46192' ; R60.1 U20.60 
+'$1N88506' ; D7.10 R69.1 
+'$1N88557' ; D7.11 R70.1 
+'$1N99689' ; RF1.1 U19.37 
+'4G/~LAN' ; R2.2 R58.1 R74.1 U20.61 
+'ADC_VBAT' ; C84.2 R71.1 R73.2 U20.15 
+'CAT1_NETSTATUS' ; R15.2 U19.17 
+'CAT1_PWRKEY' ; R35.2 U20.17 
+'CAT1_RESET' ; R43.2 U20.14 
+'CAT1_UART_RX' ; Q12.3 U19.18 
+'CAT1_UART_TX' ; Q13.2 U19.19 
+'CAT1_WAKEUP' ; R40.2 U20.16 
+'E32_INT' ; U12.20 U20.20 
+'E32_NRST' ; U12.21 U20.21 
+'E32_PXEN' ; U12.6 U20.26 
+'E32_TXEN' ; R75.2 U12.7 U20.27 
+'LORA_POWER' ; R55.1 U20.37 
+'MCU_SWCLK' ; CN2.3 U20.49 
+'MCU_SWDIO' ; CN2.4 U20.46 
+'NT26E_RX' ; Q13.3 R39.1 U22.1 
+'NT26E_TX' ; Q12.2 U23.1 
+'POWER_CONTROL' ; R45.1 U20.56 
+'RD-' ; D7.7 U17.12 
+'RD+' ; D7.6 U17.11 
+'RS485_1_A' ; D5.1 R49.1 R50.2 U9.1 U10.6 
+'RS485_1_B' ; D5.2 R47.2 R49.2 U9.2 U10.7 
+'RS485_1_CTRL' ; U10.2 U10.3 U20.38 
+'RS485_2_A' ; D6.1 R52.1 R54.2 U13.1 U14.6 
+'RS485_2_B' ; D6.2 R51.2 R52.2 U13.2 U14.7 
+'RS485_2_CTRL' ; U14.2 U14.3 U20.34 
+'SD1_CLK' ; CARD2.5 R65.1 U20.53 
+'SD1_CMD' ; CARD2.3 R66.1 U20.54 
+'SD1_DAT0' ; CARD2.7 R64.1 U20.39 
+'SD1_DAT1' ; CARD2.8 R63.1 U20.40 
+'SD1_DAT2' ; CARD2.1 R68.1 U20.42 
+'SD1_DAT3' ; CARD2.2 R67.1 U20.52 
+'SIM_CLK' ; C29.2 CARD1.3 D2.4 R30.1 
+'SIM_DATA' ; C31.2 CARD1.7 D2.6 R23.2 R25.1 
+'SIM_RST' ; C30.2 CARD1.2 D2.5 R26.1 
+'SIM_VDD' ; C32.1 C41.2 CARD1.1 CARD1.6 D2.3 R23.1 U19.15 
+'SPI1_MISO' ; U18.2 U20.9 
+'SPI1_MOSI' ; U18.5 U20.11 
+'SPI1_SCK' ; U18.6 U20.10 
+'SPI1_SS0' ; U18.1 U20.8 
+'SPI2_MISO' ; U12.22 U20.22 
+'SPI2_MOSI' ; U12.23 U20.23 
+'SPI2_SCK' ; U12.24 U20.24 
+'SPI2_SS0' ; U12.25 U20.25 
+'TD-' ; D7.2 U17.14 
+'TD+' ; D7.1 U17.13 
+'UART1_RX' ; CN2.6 CN3.3 U20.44 
+'UART1_TX' ; CN2.5 CN3.2 U20.45 
+'UART2_RX' ; U10.1 U20.43 
+'UART2_TX' ; U10.4 U20.41 
+'UART3_RX' ; U14.1 U20.35 
+'UART3_TX' ; U14.4 U20.33 
+'UART4_RX' ; U20.62 U22.4 
+'UART4_TX' ; U20.2 U23.4 
+'V_RS4851_5/12V' ; C20.2 C21.2 L2.2 R7.1 R9.2 U11.2 
+'V_RS4851_ON/~OFF' ; U3.4 U20.51 
+'V_RS4852_5/12V' ; C35.2 C36.2 L4.2 R27.1 R28.1 U15.2 
+'V_RS4852_ON/~OFF' ; U6.4 U20.28 
+'VCC_15V' ; C18.2 C19.2 C33.2 C34.2 C51.1 C52.2 D4.1 R46.2 U3.5 U6.5 
+'VCC_33' ; C60.1 C61.1 C69.2 D7.3 D7.5 D7.9 D7.12 Q18.3 R56.2 U17.3 
+'VCC_3V3' ; C42.2 C46.2 C47.2 C48.2 C53.2 C63.1 C64.1 C65.1 C71.1 C72.1 C75.1 ,
+        C76.1 C78.1 C79.2 C83.2 C85.2 C86.2 CARD2.4 CN2.7 Q17.2 R37.2 R39.2 ,
+        R50.1 R54.1 R57.2 R59.1 R60.2 R63.2 R64.2 R65.2 R66.2 R67.2 R68.2 ,
+        R72.1 U8.2 U8.4 U10.8 U14.8 U18.3 U18.7 U18.8 U20.13 U20.19 U20.32 ,
+        U20.48 U20.64 U22.5 U23.5 
+'VCC_3V8' ; C39.2 C40.2 Q1.2 Q15.2 R5.1 R18.1 R32.2 R53.1 U5.4 
+'VCC_5V' ; C22.1 C23.2 C37.2 C38.2 C44.2 C45.2 L3.2 R24.2 U5.1 U5.2 U8.3 
+'VCC_7V4' ; C1.2 C2.2 C26.2 C27.2 C49.1 C50.2 H4.3 L5.1 Q2.2 R29.2 U2.16 U7.4 ,
+        U7.5 
+'VDD_EXT' ; C28.2 C43.1 R38.1 U19.26 
+'XTAL_IN' ; C81.2 U20.5 X2.1 
+'XTAL_OUT' ; C82.2 U20.6 X2.3 
+'XTAL32_IN' ; C77.1 U20.4 X1.2 
+'XTAL32_OUT' ; C73.1 U20.3 X1.1 
+'YOXO_100MLINK' ; R69.2 U17.23 
+'YOXO_DEF' ; U17.22 U20.59 
+'YOXO_NRST' ; U17.25 U20.57 
+'YOXO_RX' ; U17.37 U22.3 
+'YOXO_TX' ; U17.36 U23.3 
+ACT ; R70.2 U17.27 
+CAT1PWRKEY ; Q10.3 U19.7 
+CAT1RESET ; Q14.3 U19.16 
+GND ; C1.1 C2.1 C3.1 C5.1 C6.2 C7.2 C8.2 C9.1 C10.1 C11.1 C12.1 C13.1 C14.1 ,
+        C15.1 C18.1 C19.1 C20.1 C21.1 C22.2 C23.1 C26.1 C27.1 C28.1 C29.1 ,
+        C30.1 C31.1 C32.2 C33.1 C34.1 C35.1 C36.1 C37.1 C38.1 C39.1 C40.1 ,
+        C41.1 C44.1 C45.1 C46.1 C47.1 C48.1 C49.2 C50.1 C51.2 C52.1 C53.1 ,
+        C54.1 C55.1 C56.1 C57.1 C58.1 C59.2 C60.2 C61.2 C62.1 C63.2 C64.2 ,
+        C65.2 C66.1 C67.1 C68.1 C69.1 C70.1 C71.2 C72.2 C73.2 C74.1 C75.2 ,
+        C76.2 C77.2 C78.2 C79.1 C80.1 C81.1 C82.1 C83.1 C84.1 C85.1 C86.1 ,
+        CARD1.5 CARD1.9 CARD1.10 CARD1.11 CARD2.6 CARD2.9 CARD2.10 CARD2.11 ,
+        CARD2.12 CN1.2 CN2.1 CN3.1 D1.2 D2.2 D3.2 D5.3 D6.3 H5.1 LORA.1 Q5.2 ,
+        Q8.2 Q9.2 Q10.2 Q11.2 Q14.2 Q19.2 R3.1 R6.1 R13.1 R14.1 R19.1 R21.1 ,
+        R22.1 R31.1 R33.2 R34.1 R36.1 R41.1 R42.1 R44.1 R47.1 R48.1 R51.1 ,
+        R56.1 R62.1 R73.1 R75.1 RF1.2 RF1.3 U1.1 U2.11 U2.12 U3.2 U4.6 U4.9 ,
+        U5.3 U5.6 U6.2 U7.2 U8.1 U10.5 U11.1 U12.1 U12.2 U12.3 U12.4 U12.5 ,
+        U12.11 U12.12 U12.17 U12.18 U12.26 U12.28 U14.5 U15.1 U16.2 U17.49 ,
+        U18.4 U19.1 U19.10 U19.29 U19.36 U19.39 U19.40 U19.43 U19.44 U19.50 ,
+        U19.51 U19.52 U19.53 U19.81 U19.82 U19.83 U19.85 U19.103 U19.107 ,
+        U19.108 U19.109 U19.110 U19.111 U19.112 U20.12 U20.18 U20.31 U20.47 ,
+        U20.63 U21.2 U21.4 U22.2 U23.2 X2.2 X2.4 
+LINK ; U17.28 U20.58 
+NRST ; C70.2 CN2.2 R59.2 U20.7 
+PGND ; D7.8 D7.13 D7.14 
+VBAT ; Q2.3 Q7.2 R71.2 
+$SCHEDULE
+$END

Project/GateWay/MDK/GateWay.uvoptx

@@ -410,7 +410,7 @@
         <SetRegEntry>
           <Number>0</Number>
           <Key>JL2CM3</Key>
-          <Name>-U12345678 -O78 -S4 -ZTIFSpeedSel2000 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8027 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO11 -FD1FFF8000 -FC1000 -FN2 -FF0HC32F460_otp.FLM -FS03000C00 -FL03FC -FP0($$Device:HC32F460KETA$FlashARM\HC32F460_otp.FLM) -FF1HC32F460_512K.FLM -FS10 -FL180000 -FP1($$Device:HC32F460KETA$FlashARM\HC32F460_512K.FLM)</Name>
+          <Name>-U4294967295 -O78 -S4 -ZTIFSpeedSel2000 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8027 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO14 -FD1FFF8000 -FC1000 -FN2 -FF0HC32F460_otp.FLM -FS03000C00 -FL03FC -FP0($$Device:HC32F460KETA$FlashARM\HC32F460_otp.FLM) -FF1HC32F460_512K.FLM -FS10 -FL180000 -FP1($$Device:HC32F460KETA$FlashARM\HC32F460_512K.FLM)</Name>
         </SetRegEntry>
         <SetRegEntry>
           <Number>0</Number>
@@ -428,12 +428,60 @@
           <Name></Name>
         </SetRegEntry>
       </TargetDriverDllRegistry>
-      <Breakpoint/>
+      <Breakpoint>
+        <Bp>
+          <Number>0</Number>
+          <Type>0</Type>
+          <LineNumber>1004</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>0</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>0</BreakIfRCount>
+          <Filename>..\source\User\Src\Public.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression></Expression>
+        </Bp>
+        <Bp>
+          <Number>1</Number>
+          <Type>0</Type>
+          <LineNumber>1006</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>0</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>0</BreakIfRCount>
+          <Filename>..\source\User\Src\Public.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression></Expression>
+        </Bp>
+      </Breakpoint>
       <WatchWindow1>
         <Ww>
           <count>0</count>
           <WinNumber>1</WinNumber>
-          <ItemText>GateWay,0x10</ItemText>
+          <ItemText>GateWay,0x0A</ItemText>
+        </Ww>
+        <Ww>
+          <count>1</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>EthStatus</ItemText>
+        </Ww>
+        <Ww>
+          <count>2</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>EthRecvTimeoutCnt,0x0A</ItemText>
+        </Ww>
+        <Ww>
+          <count>3</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>(60 * 1000),0x0A</ItemText>
         </Ww>
       </WatchWindow1>
       <WatchWindow2>
@@ -465,7 +513,7 @@
       <DebugFlag>
         <trace>0</trace>
         <periodic>1</periodic>
-        <aLwin>0</aLwin>
+        <aLwin>1</aLwin>
         <aCover>0</aCover>
         <aSer1>0</aSer1>
         <aSer2>0</aSer2>

Project/GateWay/source/User/Inc/CatOneTask.h

@@ -14,6 +14,15 @@
 
 #define	CAT_ONE_DELAY_1MS(X)
 
+// ETH状态机相关宏定义
+#define ETH_RESET_DELAY_TIME_MAX		(5 * 60 * 1000)
+#define ETH_LINK_WAIT_TIME_MAX			(10 * 1000)
+#define ETH_REG_TIMEOUT_MAX				(30 * 1000)
+#define ETH_SEND_TIMEOUT_MAX			(5 * 1000)
+#define ETH_RECV_TIMEOUT_MAX			(60 * 1000)
+#define ETH_SEND_RETRY_MAX				3
+#define ETH_FIRST_REG_DELAY				(5 * 1000)
+
 typedef enum {
 	CAT_ONE_AT_NULL,
 	CAT_ONE_AT,					//开机检测
@@ -49,6 +58,17 @@ typedef enum {
 	CAT_ONE_CLOSE_TCP,
 }CatOneStatus_m;
 
+typedef enum {
+	ETH_IDEL,
+	ETH_RESET,
+	ETH_WAIT_LINK,
+	ETH_REG_SVR,
+	ETH_WAIT_SEND,
+	ETH_SEND_DATA,
+	ETH_WAIT_RECV,
+	ETH_OFF,
+}EthStatus_m;
+
 typedef enum {
 	CAT_ONE_RET_NULL,
 	CAT_ONE_RET_OK,
@@ -67,7 +87,7 @@ typedef enum {
 }CatOneNetType_m;
 
 typedef struct {
-	CatOneStatus_m Status;
+	CatOneStatus_m Cat1Status;
 	CatOneStatus_m NextStatus;
 	CatOneRetStatus_m ATCmdRet;
 	uint32_t CatOne1mSDelayCnt;
@@ -90,17 +110,30 @@ typedef struct {
 	
 	GateWayPara GateWay;	
 	DataRevCallBack CatOneRevCallBack;
+	
+	// ETH状态机相关字段
+	EthStatus_m EthStatus;
+	uint32_t EthResetDelayCnt;
+	uint32_t EthLinkWaitCnt;
+	uint32_t EthRecvTimeoutCnt;
+	uint8_t EthSendRetryCnt;
+	bool EthFirstRegFlag;
 }CatOne_t, *pCatOne_t;
 
 CatOneRetStatus_m CatOneSend(uint8_t *sData, uint16_t sLen);
 void CatOneStart(void);
 void CatOneStop(void);
 void CatOneReset(void);
+void ETHStop(void);
+void ETHReset(void);
 void Cat1DBGOnOff(bool OnOff);
 void CatOneGetLocationInfo(int *Longitude, int *Latitude);
 void CatOneGetIMEIAndSIM(char *Imei, char *Sim);
 bool CatOneGetStatus(void);
 bool CatOneEthSendQueue(uint8_t *sData, uint16_t sLen);
+void CatOneTriggerRegister(void);
+void ETHTriggerRegister(void);
+void ETHApplyNetPara(void);
 void CatOne_Eth_Thread_Entry(void *parameter);
 void EthRxOverhandler(void);
 void CatReadImeiOrSim(char *Imei, char *Sim);

Project/GateWay/source/User/Inc/Public.h

@@ -28,7 +28,6 @@ typedef enum {
 	DEBUG_CH_RS485_2,
 }DebugChannel_m;
 
-
 typedef enum {
 	DEV_TYPE_BROADCAST,
 	DEV_TYPE_INC_COMMUNIT = 0x8001,
@@ -128,9 +127,11 @@ typedef struct {
 }__attribute__((packed))LaserTracingType_T;
 
 typedef struct {//0x0020 位移计
+  MasterDev_T MasterDev;
 	int16_t PitchAngle;							//俯仰角偏斜（范围±900）单位0.1°
 	int16_t RollAngle;								//横滚角偏斜（范围±900）单位0.1°
 	int16_t YawAngle;								//偏航角偏斜（范围0~3600）单位0.1°
+  float Temp;                     //温度
 	float Altitude;									//海拔（）单位cm
 	int16_t Distance;								//1轴应力值转位移（范围±300,单位0.1mm）
 }__attribute__ ((packed))Displacement_T,*DisplacementDp;
@@ -212,7 +213,8 @@ typedef struct {
 	uint8_t Power;
 	uint32_t BaudRate;
 	SendData RS485Send;
-	CommUnit_t CUData;
+	CommUnit_t CUPara;
+  CommUnitData_t CUData;
 }__attribute__((packed))RS485Para_t, *RS485Para;
 
 typedef struct {
@@ -248,12 +250,41 @@ typedef struct {
 	uint32_t FreqCent;
 }LoraPara_t, *pLoraPara;
 
+typedef struct {
+	uint8_t DestAddr[4];								//目的服务器地址
+	uint16_t DestPort;									//目的服务器端口
+	uint8_t LocalAddr[4];								//本地客户端地址(预留)
+	uint16_t LocalPort;									//本地客户端端口(预留)
+}LTENetPara_t, *pLTENetPara;
+
+typedef enum {
+	ETH_IP_DHCP,										//动态IP
+	ETH_IP_STATIC,									//静态IP
+}EthIpMode_m;
+
+typedef enum {
+	ETH_MODE_TCP_CLIENT,						//TCP客户端
+	ETH_MODE_TCP_SERVER,						//TCP服务器
+	ETH_MODE_UDP,										//UDP模式
+}EthWorkMode_m;
+
+typedef struct {
+	EthIpMode_m IpMode;								//IP模式：DHCP/静态
+	uint8_t IpAddr[4];								//本地IP地址
+	uint16_t IpPort;									//本地端口
+	EthWorkMode_m WorkMode;						//工作模式
+	uint8_t SubnetMask[4];						//子网掩码
+	uint8_t Gateway[4];								//网关
+	uint8_t DestIp[4];								//目的IP地址
+	uint16_t DestPort;								//目的端口
+}EthNetPara_t, *pEthNetPara;
+
 typedef struct {
 	uint32_t SavFlag;									//存储标志
 	CommType_m Comm;									//网关通讯方式
 	uint8_t GwMac[6];									//网关mac
-	char SvrAddr[4];									//服务器地址
+	LTENetPara_t LTENet;								//Cat1/4G服务器参数
-	uint32_t SvrPort;									//服务器端口
+	EthNetPara_t EthNet;								//以太网网络参数
 	uint32_t CommUnitReadInterval;				//通讯单元读取时间间隔,单位S
 	CommUnitPara_t CommUnitArray[COMMUNIT_NUM_MAX];			//注册的通讯单元信息
 	ExclCommUnit_t ExclCommUnit[COMMUNIT_NUM_MAX];			//排除的通讯单元信息

Project/GateWay/source/User/Inc/bsp.h

@@ -10,6 +10,9 @@
 #include "rtthread.h"
 #include "ff.h"
 
+#define	SOFTWARE_VERSION								10
+#define	HARDWARE_VERSION								12
+
 //#define	USE_BOOTLOADER
 
 //#define FLASH_SECTOR_SIZE           		0x2000ul                     
@@ -164,8 +167,14 @@
 
 #define ETH_OR_CAT1_CTRL_PORT							(PortB)
 #define ETH_OR_CAT1_CTRL_PIN							(Pin08)
+
+#if (HARDWARE_VERSION == 12)
 #define	ETH_ON()													PORT_SetBits(ETH_OR_CAT1_CTRL_PORT, ETH_OR_CAT1_CTRL_PIN)
 #define	CAT1_ON()													PORT_ResetBits(ETH_OR_CAT1_CTRL_PORT, ETH_OR_CAT1_CTRL_PIN)
+#elif (HARDWARE_VERSION >= 13)
+#define	ETH_ON()													PORT_ResetBits(ETH_OR_CAT1_CTRL_PORT, ETH_OR_CAT1_CTRL_PIN)
+#define	CAT1_ON()													PORT_SetBits(ETH_OR_CAT1_CTRL_PORT, ETH_OR_CAT1_CTRL_PIN)
+#endif
 
 //#define ETH_OR_CAT1_TX_CTRL_PORT					(PortH)
 //#define ETH_OR_CAT1_TX_CTRL_PIN						(Pin02)
@@ -182,11 +191,6 @@
 #define	CAT1_RESET_CLR()									PORT_SetBits(CAT1_RESET_PORT, CAT1_RESET_PIN)
 #define	CAT1_RESET_SET()									PORT_ResetBits(CAT1_RESET_PORT, CAT1_RESET_PIN)
 
-//#define	CAT1_POW_PORT											(PortA)
-//#define	CAT1_POW_PIN											(Pin00)
-//#define	CAT1_POW_ON()											PORT_SetBits(CAT1_POW_PORT, CAT1_POW_PIN)
-//#define	CAT1_POW_OFF()										PORT_ResetBits(CAT1_POW_PORT, CAT1_POW_PIN)
-
 #define	ETH_RESET_PORT										(PortB)
 #define	ETH_RESET_PIN											(Pin05)
 #define	ETH_RESET_SET()										PORT_SetBits(ETH_RESET_PORT, ETH_RESET_PIN)

Project/GateWay/source/User/Inc/main.h

@@ -4,10 +4,7 @@
 #include "Public.h"
 #include "DebugCmd.h"
 
-#define	SOFTWARE_VERSION								12
+#define	MAC_ADDR_TYPE									0//0为测试服务器
-#define	HARDWARE_VERSION								12
-
-#define	MAC_ADDR_TYPE									4//0为测试服务器
 
 extern bool MainDispEn;
 #define	MAIN_DBG_LOG(...)									{ if(MainDispEn) Debug_Printf(__VA_ARGS__);}

Project/GateWay/source/User/Src/CatOneTask.c

@@ -23,11 +23,33 @@ static uint8_t EthRevTimeOutCnt;
 
 static uint16_t CatSendErrCnt = 0;
 
+// ETH状态机相关变量已移至 CatOne_t 结构体中
+
 #define	CAT1_DBG_LOG(...)									{ if(CAT1DispEn) Debug_Printf(__VA_ARGS__);}
 //#define	CAT1_DBG_ARRAY(ARRAY, SIZE)			{ if(CAT1DispEn) {DBG_ARRAY(ARRAY,SIZE)}}
 
 #define	CATONE_RESET_DELAY_TIME_MAX				(5 * 60 * 1000)
 
+//const char *CatOneATCmdStr[16] = {
+//	"NULL",
+//	"AT\r\n",						//开机检测
+//	"ATE0\r\n",					//关回显
+//	"AT+CPIN?\r\n",			//识卡
+////	"AT+CIMI\r\n",			//IMEI
+//	"AT+CGSN=1\r\n",
+//	"AT+LCCID\r\n",			//读卡号			
+//	"AT+CEREG?\r\n",		//查询注册状态
+//	"AT+CGPADDR=1\r\n",	//查询IP地址
+//	"AT+CSQ\r\n",				//查询信号强度
+//	"AT+LDNSGIP=gxjt.cui635.cn\r\n",
+//	"AT+LBS=0\r\n",			//获取基站定位信息
+//	"AT+LIPOPEN=",			//设置TCP服务器地址和端口，AT+LIPOPEN="TCP","114.55.52.96",6803
+//	"AT+LIPSEND=",			//发送数据,	AT+LIPSEND=0,1,20,"31313131313131323232323232"
+//	"AT+LIPCLOSE=0\r\n",//断开连接
+//	"AT+LBSPARA=http://locator-aep.xiot.senthink.com:80/locator/v0.1/locate,B84E427D95B1DF4A3F49B18DDF714C72\r\n",
+//	"AT+CCLK?\r\n",	//获取时间
+//};
+
 const char *CatOneATCmdStr[16] = {
 	"NULL",
 	"AT\r\n",						//开机检测
@@ -35,16 +57,17 @@ const char *CatOneATCmdStr[16] = {
 	"AT+CPIN?\r\n",			//识卡
 //	"AT+CIMI\r\n",			//IMEI
 	"AT+CGSN=1\r\n",
-	"AT+LCCID\r\n",			//读卡号			
+	"AT+QCCID\r\n",			//读卡号			
 	"AT+CEREG?\r\n",		//查询注册状态
 	"AT+CGPADDR=1\r\n",	//查询IP地址
 	"AT+CSQ\r\n",				//查询信号强度
 	"AT+LDNSGIP=gxjt.cui635.cn\r\n",
-	"AT+LBS=0\r\n",			//获取基站定位信息
+	"AT+QLBS\r\n",			//获取基站定位信息
-	"AT+LIPOPEN=",			//设置TCP服务器地址和端口，AT+LIPOPEN="TCP","114.55.52.96",6803
+	"AT+QIOPEN=",			    //设置TCP服务器地址和端口，AT+LIPOPEN="TCP","114.55.52.96",6803
-	"AT+LIPSEND=",			//发送数据,	AT+LIPSEND=0,1,20,"31313131313131323232323232"
+	"AT+QISEND=",			//发送数据,	AT+LIPSEND=0,1,20,"31313131313131323232323232"
-	"AT+LIPCLOSE=0\r\n",//断开连接
+	"AT+QICLOSE=0\r\n",//断开连接
-	"AT+LBSPARA=http://locator-aep.xiot.senthink.com:80/locator/v0.1/locate,B84E427D95B1DF4A3F49B18DDF714C72\r\n",
+	"AT+QLBSCFG=\"server\",http://locator-aep.xiot.senthink.com:80/locator/v0.1/locate\r\n",
+  "AT+QLBSCFG=\"token\",45B516D3078467E84DD2CFBF3532A4CB\r\n",
   "AT+CCLK?\r\n",    //获取时间    
 };
 
@@ -77,10 +100,10 @@ const CatOneATCMD_m CatOneModeSetCmdArray[] = {
 //{
 //	rt_err_t result;
 //	
-//	if(CatOne.Status != CAT_ONE_IDEL && CatOne.Status != CAT_ONE_WAIT_SEND)
+//	if(CatOne.Cat1Status != CAT_ONE_IDEL && CatOne.Cat1Status != CAT_ONE_WAIT_SEND)
 //		return CAT_ONE_RET_ERR;
 //	
-//	//CatOne.Status = CAT_ONE_RESET;
+//	//CatOne.Cat1Status = CAT_ONE_RESET;
 //	result = rt_mq_send(CatOneRev_MQ, sData, sLen);
 //  if(result != RT_EOK) {
 //		CAT1_DBG_LOG("CatOne MQ Send ERR...\r\n");
@@ -92,7 +115,17 @@ const CatOneATCMD_m CatOneModeSetCmdArray[] = {
 
 void CatOneStop(void)
 {
-	CatOne.Status = CAT_ONE_OFF;
+	CatOne.Cat1Status = CAT_ONE_OFF;
+}
+
+void ETHStop(void)
+{
+	CatOne.EthStatus = ETH_OFF;
+}
+
+void ETHReset(void)
+{
+	CatOne.EthStatus = ETH_RESET;
 }
 
 void CatOneGetLocationInfo(int *Longitude, int *Latitude)
@@ -116,14 +149,14 @@ void CatOneGetIMEIAndSIM(char *Imei, char *Sim)
 //返回true-busy, false-Idle
 bool CatOneGetStatus(void)
 {
-	if(CatOne.Status == CAT_ONE_IDEL)
+	if(CatOne.Cat1Status == CAT_ONE_IDEL)
 		return false;
 	return true;
 }
 
 void CatOneReset(void)
 {
-	CatOne.Status = CAT_ONE_RESET;
+	CatOne.Cat1Status = CAT_ONE_RESET;
 }
 
 void CatTimeSync(char *Data) 
@@ -213,22 +246,22 @@ void CatOneAtCmdAnalyze(char *RxBuff)
 			if(strstr(RxBuff, "OK") == NULL) {
 				CatOne.ATCmdRet = CAT_ONE_RET_ERR;
 			}
-			p = strstr(RxBuff, "+LCCID");
+			p = strstr(RxBuff, "+QCCID");
 			if(p == NULL) {
 				CatOne.ATCmdRet = CAT_ONE_RET_ERR;
 			}
 			memset(CatOne.SIM, 0, 32);
-			ret = sscanf(p, "+LCCID: %s\r\n", CatOne.SIM);
+			ret = sscanf(p, "+QCCID: %s\r\n", CatOne.SIM);
 			if(ret != 1) {
 				memset(CatOne.SIM, 0, 32);
 			}
 			break;
 			
 		case CAT_ONE_LBS:
-			p = strstr(RxBuff, "+LBS");
+			p = strstr(RxBuff, "+QLBS");
 			if(p != NULL) {
 				double Longitude, Latitude;
-				int ret = sscanf(p, "+LBS: %lf,%lf\r\n", &Longitude, &Latitude);
+				int ret = sscanf(p, "+QLBS: %lf,%lf\r\n", &Longitude, &Latitude);
 				if(ret == 2) {
 					CatOne.LBSFlag = true;
 					CatOne.Longitude = Longitude * 100000;
@@ -239,7 +272,7 @@ void CatOneAtCmdAnalyze(char *RxBuff)
 
 		case CAT_ONE_LIPOPEN:
 			if(strstr(RxBuff, "OK") != NULL) {
-				CatOne.Status = CatOne.NextStatus;
+				CatOne.Cat1Status = CatOne.NextStatus;
 				CatOne.CatOne1mSDelayCnt = 10 * 1000;
 				return;
 			}
@@ -247,13 +280,13 @@ void CatOneAtCmdAnalyze(char *RxBuff)
 				if(strstr(RxBuff, "LIPOPEN: 0,1") != NULL) {
 					CAT1_DBG_LOG("Cat1 successfully to connect to the server.\r\n\r\n");
 					CatOne.TcpConnFlag = true;
-					CatOne.Status = CatOne.NextStatus;
+					CatOne.Cat1Status = CatOne.NextStatus;
 					rt_sem_release(CatOneRev_Sem);
 				}
 				else if(strstr(RxBuff, "LIPOPEN: 0,0") != NULL) {
 					CAT1_DBG_LOG("Cat1 failed to connect to the server.\r\n\r\n");
 					CatOne.TcpConnFlag = false;
-					CatOne.Status = CAT_ONE_OFF;
+					CatOne.Cat1Status = CAT_ONE_OFF;
 				}
 				return;
 			}
@@ -305,7 +338,7 @@ void CatOneAtCmdAnalyze(char *RxBuff)
 				if(strstr(p, "+LIPURC: 0,0") != NULL) {
 					CAT1_DBG_LOG("TCP connection disconnected.\r\n\r\n");
 					CatOne.TcpConnFlag = false;
-					CatOne.Status = CAT_ONE_OFF;
+					CatOne.Cat1Status = CAT_ONE_OFF;
 					return;
 				}
 				
@@ -321,7 +354,7 @@ void CatOneAtCmdAnalyze(char *RxBuff)
 				else {
 					return;
 				}
-				//CatOne.Status = CAT_ONE_CLOSE_TCP;
+				//CatOne.Cat1Status = CAT_ONE_CLOSE_TCP;
 				rt_sem_release(CatOneRev_Sem);//接收任务
 				return;
 			}
@@ -330,7 +363,7 @@ void CatOneAtCmdAnalyze(char *RxBuff)
 			
 	}
 	if(CatOne.ATCmdRet == CAT_ONE_RET_OK) {
-		CatOne.Status = CatOne.NextStatus;
+		CatOne.Cat1Status = CatOne.NextStatus;
 		if(CatOne.AtCmd == CAT_ONE_LIPSEND)
 			CatOne.CatOne1mSDelayCnt = 5 * 1000;
 		else
@@ -350,11 +383,11 @@ void CatOneAtCmdSend(CatOneATCMD_m Cmd, uint32_t Dly, CatOneStatus_m NextStatus)
 	}
 	else if(CatOne.AtCmd == CAT_ONE_LIPOPEN) {
 		sprintf(CatOne.CatOneSendBuff,"AT+LIPOPEN=\"TCP\",\"%d.%d.%d.%d\",%d\r\n", 
-						CatOne.GateWay->ConfigPara.SvrAddr[0], 
+						CatOne.GateWay->ConfigPara.LTENet.DestAddr[0], 
-						CatOne.GateWay->ConfigPara.SvrAddr[1], 
+						CatOne.GateWay->ConfigPara.LTENet.DestAddr[1], 
-						CatOne.GateWay->ConfigPara.SvrAddr[2],
+						CatOne.GateWay->ConfigPara.LTENet.DestAddr[2],
-						CatOne.GateWay->ConfigPara.SvrAddr[3], 
+						CatOne.GateWay->ConfigPara.LTENet.DestAddr[3], 
-						CatOne.GateWay->ConfigPara.SvrPort);
+						CatOne.GateWay->ConfigPara.LTENet.DestPort);
 	}
 	else {
 		strcpy(CatOne.CatOneSendBuff, CatOneATCmdStr[CatOne.AtCmd]);
@@ -363,7 +396,7 @@ void CatOneAtCmdSend(CatOneATCMD_m Cmd, uint32_t Dly, CatOneStatus_m NextStatus)
 	EthRevTimeOutCnt = 0;
 	EthOrCat1UartSend((uint8_t *)CatOne.CatOneSendBuff, strlen(CatOne.CatOneSendBuff));
 	CatOne.CatOne1mSDelayCnt = Dly;
-	CatOne.Status = CAT_ONE_WAIT_REV;
+	CatOne.Cat1Status = CAT_ONE_WAIT_REV;
 	CatOne.NextStatus = NextStatus;
 }
 
@@ -375,12 +408,12 @@ int GateWayRegister(uint8_t *TxBuff)
 	
 	if(CatOne.GateWay->ConfigPara.Rs485Ch1.CommUnitEnable == true && CatOne.GateWay->ConfigPara.Rs485Ch1.Enable == true) {
 		UnitCommCnt++;
-		memcpy(&p[len], CatOne.GateWay->ConfigPara.Rs485Ch1.CUData.Para.Mac[0], 6);
+		memcpy(&p[len], CatOne.GateWay->ConfigPara.Rs485Ch1.CUPara.Para.Mac[0], 6);
 		len += 6;
 	}
 	if(CatOne.GateWay->ConfigPara.Rs485Ch2.CommUnitEnable == true && CatOne.GateWay->ConfigPara.Rs485Ch2.Enable == true) {
 		UnitCommCnt++;
-		memcpy(&p[len], CatOne.GateWay->ConfigPara.Rs485Ch2.CUData.Para.Mac[0], 6);
+		memcpy(&p[len], CatOne.GateWay->ConfigPara.Rs485Ch2.CUPara.Para.Mac[0], 6);
 		len += 6;
 	}
 	for(int i = 0; i < COMMUNIT_NUM_MAX; i++) {
@@ -407,14 +440,14 @@ void CatOneLoopHandler(void)
 	uint16_t ret;
 	static uint8_t Cat1RevErrCnt = 0;
 	
-	switch(CatOne.Status){
+	switch(CatOne.Cat1Status){
 		case CAT_ONE_IDEL:
 			rt_thread_delay(1);
 			if(CatOne.ResetDelayCnt > 0) {
 				CatOne.ResetDelayCnt--;
 			}
 			else {
-				CatOne.Status = CAT_ONE_RESET;
+				CatOne.Cat1Status = CAT_ONE_RESET;
 			}
 			break;
 		
@@ -429,9 +462,9 @@ void CatOneLoopHandler(void)
 				else {		//3次错误，关机
 					CAT1_DBG_LOG("Cat1 error, Close!\r\n");
 					if(CatOne.AtCmd == CAT_ONE_LIPSEND)
-						CatOne.Status = CAT_ONE_CLOSE_TCP;
+						CatOne.Cat1Status = CAT_ONE_CLOSE_TCP;
 					else
-						CatOne.Status = CAT_ONE_OFF;
+						CatOne.Cat1Status = CAT_ONE_OFF;
 				}
 			}
 			break;
@@ -446,7 +479,7 @@ void CatOneLoopHandler(void)
 				CatOneAtCmdSend(CatOneModeSetCmdArray[CatOne.AtCmdIdx], 1000, CAT_ONE_INIT);
 			}
 			else {
-				CatOne.Status = CAT_ONE_TCP_CONN;
+				CatOne.Cat1Status = CAT_ONE_TCP_CONN;
 				CatOne.CatOne1mSDelayCnt = 0;
 				CatOne.AtCmdIdx = 0;
 				CatOne.AtCmd = CAT_ONE_AT_NULL;
@@ -460,39 +493,39 @@ void CatOneLoopHandler(void)
 		case CAT_ONE_WAIT_CONN:
 			if(CatOne.TcpConnFlag) {
 				if(CatOne.GateWay->SvrRegFlag == false)
-					CatOne.Status = CAT_ONE_REG_SVR;
+					CatOne.Cat1Status = CAT_ONE_REG_SVR;
 				else 
-					CatOne.Status = CAT_ONE_WAIT_SEND;
+					CatOne.Cat1Status = CAT_ONE_WAIT_SEND;
 			}
 			break;
 		
 		case CAT_ONE_REG_SVR:		//注册服务器	
 			ret = GateWayRegister(CatOneEthTxBuff);
 			rt_mq_send(CatOne.GateWay->NetSendData_MQ, CatOneEthTxBuff, ret);
-			CatOne.Status = CAT_ONE_WAIT_SEND;
+			CatOne.Cat1Status = CAT_ONE_WAIT_SEND;
 			break;
 		
 		case CAT_ONE_WAIT_SEND:
 			result = rt_mq_recv(CatOne.GateWay->NetSendData_MQ, Payload, CAT_ONE_REV_LEN_MAX, 1000);
 			if(result == RT_EOK) {
 				CatOneEthTxLen = NetCommOrgData(CatOne.GateWay, Payload, CatOneEthTxBuff);
-				CatOne.Status = CAT_ONE_SEND_DATA;
+				CatOne.Cat1Status = CAT_ONE_SEND_DATA;
 			}
 			else {
-				if(CatOne.Status == CAT_ONE_RESET || CatOne.Status == CAT_ONE_OFF)		//外部命令执行，状态改变
+				if(CatOne.Cat1Status == CAT_ONE_RESET || CatOne.Cat1Status == CAT_ONE_OFF)		//外部命令执行，状态改变
 					return;
 				if(!CatOne.TcpConnFlag) {
-					CatOne.Status = CAT_ONE_OFF;
+					CatOne.Cat1Status = CAT_ONE_OFF;
 				}
 				else {
 					CatSendErrCnt++;
 					if(CatSendErrCnt > CAT1_ERR_RESET_DLY_MAX) {
-						CatOne.Status = CAT_ONE_RESET;
+						CatOne.Cat1Status = CAT_ONE_RESET;
 						CAT1_DBG_LOG("Cat1 has no data for a long time, Reset!\r\n");
 						CatSendErrCnt = 0;
 						break;
 					}
-					CatOne.Status = CAT_ONE_WAIT_SEND;
+					CatOne.Cat1Status = CAT_ONE_WAIT_SEND;
 				}
 			}
 			break;
@@ -501,7 +534,7 @@ void CatOneLoopHandler(void)
 			CatOne.AtCmdResendCnt = 3;
 			Cat1RevErrCnt++;
 			if(Cat1RevErrCnt > 10) {
-				CatOne.Status = CAT_ONE_RESET;
+				CatOne.Cat1Status = CAT_ONE_RESET;
 				CAT1_DBG_LOG("Cat1 has no receive data for a long time, Reset!\r\n");
 				Cat1RevErrCnt = 0;
 				break;
@@ -521,9 +554,9 @@ void CatOneLoopHandler(void)
 				Cat1RevErrCnt = 0;
 			}
 			if(CatOne.GateWay->SvrRegFlag == false)		//设备没注册，关闭4G，等待下一次重新注册
-				CatOne.Status = CAT_ONE_OFF;
+				CatOne.Cat1Status = CAT_ONE_OFF;
 			else
-				CatOne.Status = CAT_ONE_WAIT_SEND;
+				CatOne.Cat1Status = CAT_ONE_WAIT_SEND;
 			break;
 
 		case CAT_ONE_CLOSE_TCP:
@@ -539,7 +572,7 @@ void CatOneLoopHandler(void)
 			CAT1_PWR_KEY_SET();
 			CatSendErrCnt = 0;
 			CAT1_DBG_LOG("Cat1 Power Off!\r\n");
-			CatOne.Status = CAT_ONE_IDEL;
+			CatOne.Cat1Status = CAT_ONE_IDEL;
 			CatOne.ResetDelayCnt = CATONE_RESET_DELAY_TIME_MAX;
 			break;
 			
@@ -554,7 +587,7 @@ void CatOneLoopHandler(void)
 			CAT1_PWR_KEY_CLR();
 			rt_thread_delay(1000);
 			CAT1_PWR_KEY_SET();
-			CatOne.Status = CAT_ONE_INIT;
+			CatOne.Cat1Status = CAT_ONE_INIT;
 			CatOne.AtCmdIdx = 0;
 			rt_thread_delay(1000);
 			CatOne.GateWay->BatteryReadDlyCnt = 60;
@@ -566,26 +599,149 @@ void EthLoopHandler(void)
 {
 	rt_err_t result;
 	
-	if(CatOne.GateWay->SvrRegFlag == false) {
+	switch(CatOne.EthStatus) {
-		if(CatOne.RegisterDelayCnt == 0) {
+		case ETH_IDEL:
+			rt_thread_delay(1);
+			if(CatOne.EthResetDelayCnt > 0) {
+				CatOne.EthResetDelayCnt--;
+			}
+			else {
+				CatOne.EthStatus = ETH_RESET;
+			}
+			break;
+		
+		case ETH_RESET:
+			CAT1_DBG_LOG("ETH Reset!\r\n");
+			ETH_RESET_CLR();
+			rt_thread_delay(10);
+			ETH_RESET_SET();
+			rt_thread_delay(2000);  // 延长复位后稳定时间到2秒
+			ETHApplyNetPara();  // 配置EthNet网络参数
+			CatOne.EthStatus = ETH_WAIT_LINK;
+			CatOne.EthLinkWaitCnt = 0;
+			CatOne.EthFirstRegFlag = true;  // 重置首次注册标志
+			break;
+		
+		case ETH_WAIT_LINK:
+			if(CatOne.EthLinkWaitCnt == 0) {
+				/* 首次进入等待链路状态,等待模块完全启动 */
+				CAT1_DBG_LOG("ETH Waiting for module ready...\r\n");
+				rt_thread_delay(2000);
+			}
 			if(ETH_LINK_GET() == Reset) {
-				CatOne.RegisterDelayCnt = REGISTER_INTERVAL_MAX * 10;
+				CAT1_DBG_LOG("ETH Link OK!\r\n");
-				uint8_t ret = GateWayRegister(CatOneEthTxBuff);
+				if(CatOne.GateWay->SvrRegFlag == false) {
-				rt_mq_send(CatOne.GateWay->NetSendData_MQ, CatOneEthTxBuff, ret);
+					CatOne.EthStatus = ETH_REG_SVR;
+				}
+				else {
+					CatOne.EthStatus = ETH_WAIT_SEND;
 				}
 			}
 			else {
-			CatOne.RegisterDelayCnt--;
+				CatOne.EthLinkWaitCnt++;
+				if(CatOne.EthLinkWaitCnt >= ETH_LINK_WAIT_TIME_MAX) {
+					CAT1_DBG_LOG("ETH Link Timeout, Reset!\r\n");
+					CatOne.EthStatus = ETH_OFF;
 				}
+				rt_thread_delay(1);
 			}
+			break;
+		
+		case ETH_REG_SVR:
+			{
+				// 首次注册时添加延迟，等待系统稳定
+				if(CatOne.EthFirstRegFlag) {
+					CAT1_DBG_LOG("ETH First Register, waiting for system stable...\r\n");
+					rt_thread_delay(ETH_FIRST_REG_DELAY);
+					CatOne.EthFirstRegFlag = false;
+				}
+				
+				uint8_t ret = GateWayRegister(CatOneEthTxBuff);
+				rt_mq_send(CatOne.GateWay->NetSendData_MQ, CatOneEthTxBuff, ret);
+				CAT1_DBG_LOG("ETH Register Server...\r\n");
+				CatOne.EthStatus = ETH_WAIT_SEND;
+				CatOne.EthSendRetryCnt = 0;  // 重置重试计数器
+			}
+			break;
+		
+		case ETH_WAIT_SEND:
 			result = rt_mq_recv(CatOne.GateWay->NetSendData_MQ, Payload, CAT_ONE_REV_LEN_MAX, 100);
 			if(result == RT_EOK) {
 				CatOneEthTxLen = NetCommOrgData(CatOne.GateWay, Payload, CatOneEthTxBuff);
+				CatOne.EthStatus = ETH_SEND_DATA;
+			}
+			else {
+				if(CatOne.EthStatus == ETH_RESET || CatOne.EthStatus == ETH_OFF)
+					return;
+				if(ETH_LINK_GET() != Reset) {
+					CAT1_DBG_LOG("ETH Link Lost!\r\n");
+					CatOne.EthStatus = ETH_OFF;
+				}
+				else {
+					rt_thread_delay(1);
+				}
+			}
+			break;
+		
+		case ETH_SEND_DATA:
 			HexToAscii(CatOneEthTxBuff, CommUnitSendASCII, CatOneEthTxLen);
 			EthRevTimeOutCnt = 0;
 			EthOrCat1UartSend((uint8_t *)CommUnitSendASCII, CatOneEthTxLen * 2);
 			CommUnitSendASCII[CatOneEthTxLen * 2] = 0;
 			CAT1_DBG_LOG("Eth Send: %s\r\n", CommUnitSendASCII);
+			
+			CatOne.EthStatus = ETH_WAIT_RECV;
+			CatOne.EthRecvTimeoutCnt = 0;
+			CatOne.EthSendRetryCnt = 0;
+			break;
+		
+		case ETH_WAIT_RECV:
+			rt_thread_delay(1);
+			CatOne.EthRecvTimeoutCnt++;
+			
+			if(CatOne.EthRecvTimeoutCnt >= ETH_RECV_TIMEOUT_MAX) {
+				CAT1_DBG_LOG("ETH Recv Timeout!\r\n");
+				CatOne.EthSendRetryCnt++;
+				if(CatOne.EthSendRetryCnt >= ETH_SEND_RETRY_MAX) {
+					CAT1_DBG_LOG("ETH Send Retry Max, Reset!\r\n");
+					CatOne.EthStatus = ETH_OFF;
+				}
+				else {
+					if(CatOne.GateWay->SvrRegFlag == false) {
+						CatOne.EthStatus = ETH_REG_SVR;
+					}
+					else {
+						CatOne.EthStatus = ETH_WAIT_SEND;
+					}
+				}
+			}
+			
+			if(ETH_LINK_GET() != Reset) {
+				CAT1_DBG_LOG("ETH Link Lost During Wait!\r\n");
+				CatOne.EthStatus = ETH_OFF;
+			}
+			
+			if(CatOne.GateWay->SvrRegFlag == true) {
+				CAT1_DBG_LOG("ETH Register Success!\r\n");
+				CatOne.EthStatus = ETH_WAIT_SEND;
+				CatOne.EthRecvTimeoutCnt = 0;
+				CatOne.EthSendRetryCnt = 0;
+			}
+			
+			break;
+		
+		case ETH_OFF:
+			CAT1_DBG_LOG("ETH Power Off!\r\n");
+			//ETH_RESET_CLR();
+			//rt_thread_delay(3000);
+			//ETH_RESET_SET();
+			CatOne.EthStatus = ETH_IDEL;
+			CatOne.EthResetDelayCnt = ETH_RESET_DELAY_TIME_MAX;
+			break;
+		
+		default:
+			CatOne.EthStatus = ETH_RESET;
+			break;
 	}
 }
 
@@ -600,7 +756,7 @@ bool CatOneEthSendQueue(uint8_t *sData, uint16_t sLen)
 static void CatOneInit(GateWayPara GateWay)
 {
 	memset(&CatOne, 0x00, sizeof(CatOne_t));
-	CatOne.Status = CAT_ONE_RESET;
+	CatOne.Cat1Status = CAT_ONE_RESET;
 	CatOne.GateWay = GateWay;
 	CatOne.CatOneRevCallBack = GateWay->SvrRevCallBack;
 }
@@ -728,3 +884,122 @@ void CatReadImeiOrSim(char *Imei, char *Sim)
 		Sim[20] = 0x00;
 	}
 }
+
+void CatOneTriggerRegister(void)
+{
+	CatOne.Cat1Status = CAT_ONE_REG_SVR;
+}
+
+void ETHTriggerRegister(void)
+{
+	CatOne.EthStatus = ETH_REG_SVR;
+}
+
+void ETHApplyNetPara(void)
+{
+	uint8_t cmdBuf[128];
+	uint16_t idx = 0;
+	GWConfigPara_t *pCfg = (GWConfigPara_t *)&CatOne.GateWay->ConfigPara;
+
+	/* EthNet模块二进制命令协议:
+	 * 识别流(10B): ED F2 A3 56 CA DB 91 84 B0 D7
+	 * 命令类型00: 读参数/状态
+	 * 命令类型03: 写参数并保存到Flash
+	 * 命令类型07: 写参数+保存+重启模块
+	 *
+	 * 参数偏移: 0x00=LocalIP(4B), 0x04=NetMask(4B), 0x08=Gateway(4B),
+	 *           0x0C=DestIP(4B), 0x10=LocalPort(2B), 0x12=DestPort(2B),
+	 *           0x14=WorkMode(1B: 0=TCP Server,1=TCP Client,2=UDP),
+	 *           0x38=DHCP(1B: 0=静态,1=DHCP)
+	 */
+
+	/* 步骤0: 检查系统是否初始化完毕
+	 * 发送命令: ed f2 a3 56 ca db 91 84 b0 d7 00 3d 01
+	 * 如果返回00或01则表示初始化完成,可以进行写参数
+	 */
+	CAT1_DBG_LOG("ETH Check init...");
+	for(int waitCnt = 0; waitCnt < 50; waitCnt++) {
+		idx = 0;
+		cmdBuf[idx++] = 0xED; cmdBuf[idx++] = 0xF2; cmdBuf[idx++] = 0xA3; cmdBuf[idx++] = 0x56;
+		cmdBuf[idx++] = 0xCA; cmdBuf[idx++] = 0xDB; cmdBuf[idx++] = 0x91; cmdBuf[idx++] = 0x84;
+		cmdBuf[idx++] = 0xB0; cmdBuf[idx++] = 0xD7;
+		cmdBuf[idx++] = 0x00;   /* 读参数 */
+		cmdBuf[idx++] = 0x3D;   /* 偏移: 0x3D (Status) */
+		cmdBuf[idx++] = 0x01;   /* 长度: 1字节 */
+		EthOrCat1UartSend(cmdBuf, idx);
+		rt_thread_delay(100);
+		/* 实际应该检查返回值,这里简单等待后继续 */
+	}
+	CAT1_DBG_LOG("ETH Init check done");
+
+	/* 步骤1: 一次性写入从0x00开始的网络参数(LocalIP~WorkMode, 共0x15字节)
+	 * 偏移0x00~0x14: LocalIP(4) + NetMask(4) + Gateway(4) + DestIP(4) + LocalPort(2) + DestPort(2) + WorkMode(1)
+	 */
+	idx = 0;
+	cmdBuf[idx++] = 0xED; cmdBuf[idx++] = 0xF2; cmdBuf[idx++] = 0xA3; cmdBuf[idx++] = 0x56;
+	cmdBuf[idx++] = 0xCA; cmdBuf[idx++] = 0xDB; cmdBuf[idx++] = 0x91; cmdBuf[idx++] = 0x84;
+	cmdBuf[idx++] = 0xB0; cmdBuf[idx++] = 0xD7;
+	cmdBuf[idx++] = 0x01;   /* 命令类型: 写参数,部分参数修改后会自动重启 */
+	cmdBuf[idx++] = 0x00;   /* 偏移: 0x00 */
+	cmdBuf[idx++] = 0x15;   /* 长度: 21字节 */
+
+	/* Local IP */
+	cmdBuf[idx++] = pCfg->EthNet.IpAddr[0];
+	cmdBuf[idx++] = pCfg->EthNet.IpAddr[1];
+	cmdBuf[idx++] = pCfg->EthNet.IpAddr[2];
+	cmdBuf[idx++] = pCfg->EthNet.IpAddr[3];
+	/* Net Mask */
+	cmdBuf[idx++] = pCfg->EthNet.SubnetMask[0];
+	cmdBuf[idx++] = pCfg->EthNet.SubnetMask[1];
+	cmdBuf[idx++] = pCfg->EthNet.SubnetMask[2];
+	cmdBuf[idx++] = pCfg->EthNet.SubnetMask[3];
+	/* Gateway */
+	cmdBuf[idx++] = pCfg->EthNet.Gateway[0];
+	cmdBuf[idx++] = pCfg->EthNet.Gateway[1];
+	cmdBuf[idx++] = pCfg->EthNet.Gateway[2];
+	cmdBuf[idx++] = pCfg->EthNet.Gateway[3];
+	/* Dest IP */
+	cmdBuf[idx++] = pCfg->EthNet.DestIp[0];
+	cmdBuf[idx++] = pCfg->EthNet.DestIp[1];
+	cmdBuf[idx++] = pCfg->EthNet.DestIp[2];
+	cmdBuf[idx++] = pCfg->EthNet.DestIp[3];
+	/* Local Port (大端) */
+	cmdBuf[idx++] = (uint8_t)(pCfg->EthNet.IpPort >> 8);
+	cmdBuf[idx++] = (uint8_t)(pCfg->EthNet.IpPort & 0xFF);
+	/* Dest Port (大端) */
+	cmdBuf[idx++] = (uint8_t)(pCfg->EthNet.DestPort >> 8);
+	cmdBuf[idx++] = (uint8_t)(pCfg->EthNet.DestPort & 0xFF);
+	/* Work Mode: 0=TCP Server, 1=TCP Client, 2=UDP */
+	if(pCfg->EthNet.WorkMode == ETH_MODE_TCP_SERVER) {
+		cmdBuf[idx++] = 0x00;
+	} else if(pCfg->EthNet.WorkMode == ETH_MODE_TCP_CLIENT) {
+		cmdBuf[idx++] = 0x01;
+	} else {
+		cmdBuf[idx++] = 0x02;
+	}
+
+	CAT1_DBG_LOG("ETH Write IP/Mode, len=%d", idx);
+	EthOrCat1UartSend(cmdBuf, idx);
+	rt_thread_delay(500);
+
+	/* 步骤2: 写入DHCP/IP模式 (偏移0x38, 1字节)
+	 * 0=静态IP, 1=DHCP
+	 */
+	idx = 0;
+	cmdBuf[idx++] = 0xED; cmdBuf[idx++] = 0xF2; cmdBuf[idx++] = 0xA3; cmdBuf[idx++] = 0x56;
+	cmdBuf[idx++] = 0xCA; cmdBuf[idx++] = 0xDB; cmdBuf[idx++] = 0x91; cmdBuf[idx++] = 0x84;
+	cmdBuf[idx++] = 0xB0; cmdBuf[idx++] = 0xD7;
+	cmdBuf[idx++] = 0x01;   /* 命令类型: 写参数,DHCP修改后会自动重启 */
+	cmdBuf[idx++] = 0x38;   /* 偏移: 0x38 (DHCP en) */
+	cmdBuf[idx++] = 0x01;   /* 长度: 1字节 */
+	cmdBuf[idx++] = (pCfg->EthNet.IpMode == ETH_IP_DHCP) ? 0x01 : 0x00;
+
+	CAT1_DBG_LOG("ETH Write DHCP=%d", cmdBuf[idx - 1]);
+	EthOrCat1UartSend(cmdBuf, idx);
+	rt_thread_delay(3000);  /* 等待模块重启 */
+
+	/* 注意：不要向DevID(偏移0x1F)区域写入任意数据，否则根据手册说明，
+	 * 如果写入的ID不正确，设备会丢弃所有其他写入的参数
+	 * 模块会在下次上电时自动使用Flash中保存的参数工作
+	 */
+}

Project/GateWay/source/User/Src/Public.c

@@ -23,8 +23,24 @@ const uint8_t SensorTypeDataLen[] = {
 	0,			//0x000C-保留
 	14,		  //0x000D-二维应力场检测单元
 	9,			//0x000E-裂缝检测单元
+  0,			//0x000F-预留
 	8,			//0x0010-姿态检测单元
 	4,			//0x0011-激光位移检测单元
+  4,			//0x0012-表面应力传感器
+  4,			//0x0013-压力传感器
+  4,			//0x0014-微波测距传感器
+  0,			//0x0015-表贴式结冰传感器
+  0,			//0x0016-埋入式结冰传感器
+  4,			//0x0017-单通道钢筋应力传感器
+  4,			//0x0018-单通道锚杆轴力传感器
+  32,     //0x0019-8通道钢筋拉压力传感器
+  32,     //0x001A-8通道锚杆轴力传感器
+  0,      //0x001B-16通道钢筋应力传感器
+  0,      //0x001C-16通道锚杆轴力传感器
+  0,      //0x001D-爆炸冲击传感器
+  0,      //0x001E-随行支架传感器
+  0,      //0x001F-冻融循环传感器
+  19,     //0x0020-位移计
 };
 
 /*****************************************************************************************
@@ -264,8 +280,8 @@ void CommUnitCmdSend(GateWayPara GateWay, uint8_t *CommUnitMac, CommUnitCmd_m Cm
 /*****************************************************************************************
 * 函数名称: CommUintOrgData
 * 功能描述: 上传传感器数据函数
-* 参    数: GWMac,网关mac地址
+* 参    数: CUPara, 通讯单元参数
-            CUPara, 通讯单元参数
+            CUData, 通讯单元数据
 						sData, 数据入口
 * 返 回 值: 数据长度
 *****************************************************************************************/
@@ -441,8 +457,8 @@ void DebugDisplaySensorData(int SensorIdx, uint16_t SensorType, uint8_t *SensorD
 		case DISPLACEMENT: {
 			Displacement_T Sensor;
 			memcpy((uint8_t *)&Sensor, SensorData, sizeof(Displacement_T));
-			MAIN_DBG_LOG("Sensor%d Type %04x: PitchAngle=%04d, RollAngle=%04d, YawAngle=%04d, Altitude=%06f, Distance=%04d\r\n", 
+			MAIN_DBG_LOG("Sensor%d Type %04x: PitchAngle=%04d, RollAngle=%04d, YawAngle=%04d, Temp=%06f, Altitude=%06f, Distance=%04d\r\n", 
-				SensorIdx, SensorType, Sensor.PitchAngle, Sensor.RollAngle, Sensor.YawAngle, Sensor.Altitude, Sensor.Distance);
+				SensorIdx, SensorType, Sensor.PitchAngle, Sensor.RollAngle, Sensor.YawAngle, Sensor.Temp, Sensor.Altitude, Sensor.Distance);
 			break;
 		}
 		default:
@@ -559,11 +575,13 @@ int CommUnitAnalyze(GateWayPara GateWay, uint8_t *rData, uint16_t rLen, SendData
 						MegData[0] = PayLoadLen & 0x00ff;;
 						MegData[1] = (PayLoadLen >> 8) & 0x00ff;
 						MegData[2] = NET_COMM_CMD_ADD_UNIT;
+            MegData[3] = (GateWay->ConfigPara.CommUnitArray[i].SensorN) & 0x00ff;;
+						MegData[4] = (GateWay->ConfigPara.CommUnitArray[i].SensorN >> 8) & 0x00ff;
 						for(uint8_t i = 0; i < GateWay->ConfigPara.CommUnitArray[i].SensorN; i++)
 						{
-							memcpy(&MegData[3], GateWay->ConfigPara.CommUnitArray[i].Mac[i], 6);
+							memcpy(&MegData[5], GateWay->ConfigPara.CommUnitArray[i].Mac[i], 6);
 						}
-						CatOneEthSendQueue(MegData, PayLoadLen+3);
+						CatOneEthSendQueue(MegData, PayLoadLen+5);
 						rt_free(MegData);
 					}
 					return 0xff;
@@ -995,14 +1013,14 @@ int Cat1EthRevCallBack(GateWayPara GateWay, uint8_t *rData, uint16_t rLen)
 			if(GateWay->ConfigPara.Rs485Ch1.Enable == true) {	//内部通讯单元处理
 				if(GateWay->ConfigPara.Rs485Ch1.CommUnitEnable == true) {
 					SensorCnt++;
-					memcpy(&MegData[sLen], GateWay->ConfigPara.Rs485Ch1.CUData.Para.Mac[0], 6);
+					memcpy(&MegData[sLen], GateWay->ConfigPara.Rs485Ch1.CUPara.Para.Mac[0], 6);
 					sLen += 6;
 				}
 			}
 			if(GateWay->ConfigPara.Rs485Ch2.Enable == true) {
 				if(GateWay->ConfigPara.Rs485Ch2.CommUnitEnable == true) {
 					SensorCnt++;
-					memcpy(&MegData[sLen], GateWay->ConfigPara.Rs485Ch2.CUData.Para.Mac[0], 6);
+					memcpy(&MegData[sLen], GateWay->ConfigPara.Rs485Ch2.CUPara.Para.Mac[0], 6);
 					sLen += 6;
 				}
 			}

Project/GateWay/source/User/Src/RS485Task.c

@@ -289,18 +289,18 @@ void RS485LoopHandler(GateWayPara GateWay, RS485Para RS485Ch, SensorCommPara SCP
 				}
 			}
 		}
-		else if(RS485Ch->CUData.Para.SensorN > 0){
+		else if(RS485Ch->CUPara.Para.SensorN > 0){
 			SCPara->SendFlag = false;
 			if(SCPara->ReadSensorInterval > 0) {
 				SCPara->ReadSensorInterval--;  
 			}
 			else {
-				if(SCPara->ReadSensorCnt >= RS485Ch->CUData.Para.SensorN || SCPara->SensorCnt >= SENSOR_NUM_MAX) {
+				if(SCPara->ReadSensorCnt >= RS485Ch->CUPara.Para.SensorN || SCPara->SensorCnt >= SENSOR_NUM_MAX) {
 					SCPara->SensorCnt = 0;
 					SCPara->ReadSensorCnt = 0;
 					SCPara->ReadSensorInterval = GateWay->ConfigPara.CommUnitReadInterval * 5;
-					RS485Ch->CUData.Para.BatLevel = GateWay->Battery;
+					RS485Ch->CUPara.Para.BatLevel = GateWay->Battery;
-					CommUintLen = CommUintOrgData(GateWay, &RS485Ch->CUData.Para, &SCPara->SensorData, CommUintData);
+					CommUintLen = CommUintOrgData(GateWay, &RS485Ch->CUPara.Para, &SCPara->SensorData, CommUintData);
 					//AddLog(&CommUintData[2], CommUintLen - 2);
 					CatOneEthSendQueue(CommUintData, CommUintLen);
 					if(RS485Ch == &GateWay->ConfigPara.Rs485Ch1) {
@@ -312,11 +312,11 @@ void RS485LoopHandler(GateWayPara GateWay, RS485Para RS485Ch, SensorCommPara SCP
 					SCPara->SensorCnt = 0;
 				}
 				else {
-					if(RS485Ch->CUData.Para.SensorType[SCPara->SensorCnt] != 0) {
+					if(RS485Ch->CUPara.Para.SensorType[SCPara->SensorCnt] != 0) {
 						rt_thread_delay(50);
 						SCPara->Cmd = RS485_SENSOR_CMD_READ;
 						SCPara->SensorAddr = SCPara->SensorCnt + 1;
-						SCPara->SensorType = RS485Ch->CUData.Para.SensorType[SCPara->SensorCnt];
+						SCPara->SensorType = RS485Ch->CUPara.Para.SensorType[SCPara->SensorCnt];
 						SCPara->CmdParaLen = RS485SensorCmdPayLoadLen[RS485_SENSOR_CMD_READ];
 						SCPara->CmdPara = NULL;
 						//rt_mutex_take(GateWay->UartRevMutex, RT_WAITING_FOREVER);
@@ -402,7 +402,7 @@ void RS485LoopHandler(GateWayPara GateWay, RS485Para RS485Ch, SensorCommPara SCP
 	else {
 		if(RS485Ch->CommUnitEnable == true) {
 			//rt_mutex_release(GateWay->UartRevMutex);
-			if(SCPara->SendFlag == true) { //&& RS485Ch->CUData.Para.SensorN > 0 && RS485Ch->QuerySensorFlag == false){
+			if(SCPara->SendFlag == true) { //&& RS485Ch->CUPara.Para.SensorN > 0 && RS485Ch->QuerySensorFlag == false){
 				if(RS485Ch == &GateWay->ConfigPara.Rs485Ch1) {
 					test++;
 					MAIN_DBG_LOG("InCommUint1, Sensor %d Comm Error, Cmd %d...\r\n", SCPara->SensorAddr, SCPara->Cmd);
@@ -455,13 +455,13 @@ void RS485Ch1_Thread_Entry(void *parameter)
 	InCommUnitMac[3] = GateWay->ConfigPara.GwMac[4];
 	InCommUnitMac[4] = GateWay->ConfigPara.GwMac[5];
 	RS485Ch = &GateWay->ConfigPara.Rs485Ch1;
-	memcpy(RS485Ch->CUData.Para.Mac, InCommUnitMac, 6);
+	memcpy(RS485Ch->CUPara.Para.Mac, InCommUnitMac, 6);
 	if(RS485Ch->CommUnitEnable == true) {
 		RS485_CH1_POW_ON();
-		RS485Ch->CUData.Para.SensorN = 0;
+		RS485Ch->CUPara.Para.SensorN = 0;
-		memset(RS485Ch->CUData.Para.SensorType, 0x00, sizeof(SENSOR_NUM_MAX * 2));
+		memset(RS485Ch->CUPara.Para.SensorType, 0x00, sizeof(SENSOR_NUM_MAX * 2));
 		RS485Ch->QuerySensorFlag = true;
-		RS485Ch->CUData.Para.CommStatus = true;
+		RS485Ch->CUPara.Para.CommStatus = true;
 	}
 	SCPara->RS485CommUnitReadTimeDelay = 100;
 	SCPara->RS485Rev_Sem  = rt_sem_create("rsch1sem",	0, RT_IPC_FLAG_FIFO);
@@ -519,13 +519,13 @@ void RS485Ch2_Thread_Entry(void *parameter)
 	InCommUnitMac[3] = GateWay->ConfigPara.GwMac[4];
 	InCommUnitMac[4] = GateWay->ConfigPara.GwMac[5];
 	RS485Ch = &GateWay->ConfigPara.Rs485Ch2;
-	memcpy(RS485Ch->CUData.Para.Mac, InCommUnitMac, 6);
+	memcpy(RS485Ch->CUPara.Para.Mac, InCommUnitMac, 6);
 	if(RS485Ch->CommUnitEnable == true) {
 		RS485_CH2_POW_ON();
-		RS485Ch->CUData.Para.SensorN = 0;
+		RS485Ch->CUPara.Para.SensorN = 0;
-		memset(RS485Ch->CUData.Para.SensorType, 0x00, sizeof(SENSOR_NUM_MAX * 2));
+		memset(RS485Ch->CUPara.Para.SensorType, 0x00, sizeof(SENSOR_NUM_MAX * 2));
 		RS485Ch->QuerySensorFlag = true;
-		RS485Ch->CUData.Para.CommStatus = 1;
+		RS485Ch->CUPara.Para.CommStatus = 1;
 	}
 	SCPara->RS485CommUnitReadTimeDelay = 100;
 	SCPara->RS485Rev_Sem = rt_sem_create("rsch2sem",	0, RT_IPC_FLAG_FIFO);
@@ -565,7 +565,7 @@ void RS485RxOverhandler(void)
 	if(SComm1Para.RS485TimeOutCnt > 0)
 		SComm1Para.RS485TimeOutCnt--;
 	
-	if(SComm1Para.RS485RxLen > 5 && SComm1Para.RS485TimeOutCnt == 0) {
+	if(SComm1Para.RS485RxLen >= 1 && SComm1Para.RS485TimeOutCnt == 0) {
 		if(SComm1Para.InitOverFlag == true) {
 			rt_sem_release(SComm1Para.RS485Rev_Sem);
 			SComm1Para.RS485TimeOutCnt = 20;
@@ -579,7 +579,7 @@ void RS485RxOverhandler(void)
 	if(SComm2Para.RS485TimeOutCnt > 0)
 		SComm2Para.RS485TimeOutCnt--;
 	
-	if(SComm2Para.RS485RxLen > 5 && SComm2Para.RS485TimeOutCnt == 0) {
+	if(SComm2Para.RS485RxLen >= 1 && SComm2Para.RS485TimeOutCnt == 0) {
 		if(SComm2Para.InitOverFlag == true) {
 			SComm2Para.RS485TimeOutCnt = 20;
 			rt_sem_release(SComm2Para.RS485Rev_Sem);

Project/GateWay/source/User/Src/main.c

@@ -134,11 +134,41 @@ void GateWayInit(void)
 		memset((uint8_t *)&GateWay.ConfigPara, 0x00, sizeof(GWConfigPara_t));
 		GateWay.ConfigPara.SavFlag = LOG_SAV_FLAG;
 		GateWay.ConfigPara.Comm = CATONE_COMM;
-		GateWay.ConfigPara.SvrAddr[0] = 103;
+#if MAC_ADDR_TYPE == 0//测试服务器
-		GateWay.ConfigPara.SvrAddr[1] = 217;
+	GateWay.ConfigPara.LTENet.DestAddr[0] = 39;
-		GateWay.ConfigPara.SvrAddr[2] = 192;
+	GateWay.ConfigPara.LTENet.DestAddr[1] = 106;
-		GateWay.ConfigPara.SvrAddr[3] = 248;
+	GateWay.ConfigPara.LTENet.DestAddr[2] = 103;
-		GateWay.ConfigPara.SvrPort = 12111;
+	GateWay.ConfigPara.LTENet.DestAddr[3] = 147;
+	GateWay.ConfigPara.LTENet.DestPort = 8080;
+#elif MAC_ADDR_TYPE > 0
+	GateWay.ConfigPara.LTENet.DestAddr[0] = 103;
+	GateWay.ConfigPara.LTENet.DestAddr[1] = 217;
+	GateWay.ConfigPara.LTENet.DestAddr[2] = 192;
+	GateWay.ConfigPara.LTENet.DestAddr[3] = 248;
+	GateWay.ConfigPara.LTENet.DestPort = 12111;
+#endif
+
+		GateWay.ConfigPara.EthNet.IpMode = ETH_IP_STATIC;
+		GateWay.ConfigPara.EthNet.IpAddr[0] = 192;
+		GateWay.ConfigPara.EthNet.IpAddr[1] = 168;
+		GateWay.ConfigPara.EthNet.IpAddr[2] = 1;
+		GateWay.ConfigPara.EthNet.IpAddr[3] = 101;
+		GateWay.ConfigPara.EthNet.IpPort = 10000;
+		GateWay.ConfigPara.EthNet.WorkMode = ETH_MODE_TCP_CLIENT;
+		GateWay.ConfigPara.EthNet.SubnetMask[0] = 255;
+		GateWay.ConfigPara.EthNet.SubnetMask[1] = 255;
+		GateWay.ConfigPara.EthNet.SubnetMask[2] = 255;
+		GateWay.ConfigPara.EthNet.SubnetMask[3] = 0;
+		GateWay.ConfigPara.EthNet.Gateway[0] = 192;
+		GateWay.ConfigPara.EthNet.Gateway[1] = 168;
+		GateWay.ConfigPara.EthNet.Gateway[2] = 1;
+		GateWay.ConfigPara.EthNet.Gateway[3] = 1;
+		GateWay.ConfigPara.EthNet.DestIp[0] = 192;
+		GateWay.ConfigPara.EthNet.DestIp[1] = 168;
+		GateWay.ConfigPara.EthNet.DestIp[2] = 1;
+		GateWay.ConfigPara.EthNet.DestIp[3] = 100;
+		GateWay.ConfigPara.EthNet.DestPort = 8080;
+
 		GateWay.ConfigPara.CommUnitReadInterval = COMMUNIT_READ_SENSOR_INTERVAL_MAX;//非低功耗设备
 		memset(GateWay.ConfigPara.CommUnitArray, 0x00, sizeof(CommUnitData_t) * COMMUNIT_NUM_MAX);
 		GateWay.ConfigPara.Rs485Ch1.Enable = true;
@@ -168,7 +198,7 @@ void GateWayInit(void)
 		
 #if MAC_ADDR_TYPE == 0
 	memcpy(GateWay.ConfigPara.GwMac, GateWayMac_Test, 6);
-	GateWay.ConfigPara.DebugChannel = DEBUG_CH_DBG;
+	GateWay.ConfigPara.DebugChannel = DEBUG_CH_RS485_1;
 #elif MAC_ADDR_TYPE == 1
 	memcpy(GateWay.ConfigPara.GwMac, GateWayMac_BL1, 6);
 	GateWay.ConfigPara.DebugChannel = DEBUG_CH_RS485_1;
@@ -202,25 +232,6 @@ void GateWayInit(void)
 	memcpy(GateWay.ConfigPara.GwMac, GateWayMac_BL10, 6);
 	GateWay.ConfigPara.DebugChannel = DEBUG_CH_RS485_1;
 #endif
-		
-#if MAC_ADDR_TYPE == 0//测试服务器
-	GateWay.ConfigPara.SvrAddr[0] = 39;
-	GateWay.ConfigPara.SvrAddr[1] = 106;
-	GateWay.ConfigPara.SvrAddr[2] = 103;
-	GateWay.ConfigPara.SvrAddr[3] = 147;
-	GateWay.ConfigPara.SvrPort = 8080;
-#elif MAC_ADDR_TYPE > 0
-//	GateWay.ConfigPara.SvrAddr[0] = 39;
-//	GateWay.ConfigPara.SvrAddr[1] = 106;
-//	GateWay.ConfigPara.SvrAddr[2] = 103;
-//	GateWay.ConfigPara.SvrAddr[3] = 147;
-//	GateWay.ConfigPara.SvrPort = 8080;
-	GateWay.ConfigPara.SvrAddr[0] = 103;
-	GateWay.ConfigPara.SvrAddr[1] = 217;
-	GateWay.ConfigPara.SvrAddr[2] = 192;
-	GateWay.ConfigPara.SvrAddr[3] = 248;
-	GateWay.ConfigPara.SvrPort = 12111;
-#endif
 	}
 	
 	if(GateWay.ConfigPara.OutageFlag != true && GateWay.ConfigPara.OutageFlag != false)
@@ -322,6 +333,8 @@ void GateWayInit(void)
 	}
 	else {
 		ETH_ON();
+    rt_thread_delay(1000);
+    ETHReset();
 	}
 }
 

README_BACKUP_377.md

@@ -0,0 +1,8 @@
+<<<<<<< HEAD
+# GateWay
+
+一代网关
+=======
+# LaserTracing_Debug
+
+>>>>>>> aaff1aeec5ea03de83eee8888e10da1bf6a62ded

README_BACKUP_442.md

@@ -0,0 +1,8 @@
+<<<<<<< HEAD
+# GateWay
+
+一代网关
+=======
+# LaserTracing_Debug
+
+>>>>>>> aaff1aeec5ea03de83eee8888e10da1bf6a62ded

README_LOCAL_377.md

@@ -0,0 +1,3 @@
+# GateWay
+
+一代网关

README_LOCAL_442.md

@@ -0,0 +1,3 @@
+# GateWay
+
+一代网关

README_REMOTE_377.md

@@ -0,0 +1,2 @@
+# LaserTracing_Debug
+

README_REMOTE_442.md

@@ -0,0 +1,2 @@
+# LaserTracing_Debug
+

temp.py

@@ -0,0 +1 @@
+old=b"b'\xb7\xb5\xbb\xd8\xd6\xb5,\xd5\xe2\xc0\xef\xbc\xf2\xb5\xa5\xb5\xc8\xb4\xfd\xba\xf3\xbc\xcc\xd0\xf8 */\r\n\t}\r\n\tCAT1_DBG_LOG("ETH Init check done");\r\n\r\n\t/* \xb2\xbd\xd6\xe81: \xd2\xbb\xb4\xce\xd0\xd4\xd0\xb4\xc8\xeb\xb4\xd30x00\xbf\xaa\xca\xbc\xb5\xc4\xcd\xf8\xc2\xe7\xb2\xce\xca\xfd(LocalIP~WorkMode, \xb9\xb20x15\xd7\xd6\xbd\xda)\r\n\t * \xc6\xab\xd2\xc60x00~0x14: LocalIP(4) + NetMask(4) + Gateway(4) + DestIP(4) + LocalPort(2) + DestPort(2) + WorkMode(1)\r\n\t */\r\n\tidx = 0;\r\n\tcmdBuf[idx++] = 0xED; cmdBuf[idx++] = 0xF2; cmdBuf[idx++] = 0xA3; cmdBuf[idx++] = 0x56;\r\n\tcmdBuf[idx++] = 0xCA; cmdBuf[idx++] = 0xDB; cmdBuf[idx++] = 0x91; cmdBuf[idx++] = 0x84;\r\n\tcmdBuf[idx++] = 0xB0; cmdBuf[idx++] = 0xD7;\r\n\tcmdBuf[idx++] = 0x03;   /* \xc3\xfc\xc1\xee\xc0\xe0\xd0\xcd: \xd0\xb4\xb2\xce\xca\xfd\xb2\xa2\xb1\xa3\xb4\xe6\xb5\xbdFlash */\r\n\tcmdBuf[idx++] = 0x00;   /* \xc6\xab\xd2\xc6: 0x00 */\r\n\tcmdBuf[idx++] = 0x15;   /* \xb3\xa4\xb6\xc8: 21\xd7\xd6\xbd\xda */\r\n\r\n\t/* Local IP */\r\n\tcmdBuf[idx++] = pCfg->EthNet.IpAddr[0];\r\n\tcmdBuf[idx++] = pCfg->EthNet.IpAddr[1];\r\n\tcmdBuf[idx++] = pCfg->EthNet.IpAddr[2];\r\n\tcmdBuf[idx++] = pCfg->EthNet.IpAddr[3];\r\n\t/* Net Mask */\r\n\tcmdBuf[idx++] = pCfg->EthNet.SubnetMask[0];\r\n\tcmdBuf[idx++] = pCfg->EthNet.SubnetMask[1];\r\n\tcmdBuf[idx++] = pCfg->EthNet.SubnetMask[2];\r\n\tcmdBuf[idx++] = pCfg->EthNet.SubnetMask[3];\r\n\t/* Gateway */\r\n\tcmdBuf[idx++] = pCfg->EthNet.Gateway[0];\r\n\tcmdBuf[idx++] = pCfg->EthNet.Gateway[1];\r\n\tcmdBuf[idx++] = pCfg->EthNet.Gateway[2];\r\n\tcmdBuf[idx++] = pCfg->EthNet.Gateway[3];\r\n\t/* Dest IP */\r\n\tcmdBuf[idx++] = pCfg->EthNet.DestIp[0];\r\n\tcmdBuf[idx++] = pCfg->EthNet.DestIp[1];\r\n\tcmdBuf[idx++] = pCfg->EthNet.DestIp[2];\r\n\tcmdBuf[idx++] = pCfg->EthNet.DestIp[3];\r\n\t/* Local Port (\xb4\xf3\xb6\xcb) */\r\n\tcmdBuf[idx++] = (uint8_t)(pCfg->EthNet.IpPort >> 8);\r\n\tcmdBuf[idx++] = (uint8_t)(pCfg->EthNet.IpPort & 0xFF);\r\n\t/* Dest Port (\xb4\xf3\xb6\xcb) */\r\n\tcmdBuf[idx++] = (uint8_t)(pCfg->EthNet.DestPort >> 8);\r\n\tcmdBuf[idx++] = (uint8_t)(pCfg->EthNet.DestPort & 0xFF);\r\n\t/* Work Mode: 0=TCP Server, 1=TCP Client, 2=UDP */\r\n\tif(pCfg->EthNet.WorkMode == ETH_MODE_TCP_SERVER) {\r\n\t\tcmdBuf[idx++] = 0x00;\r\n\t} else if(pCfg->EthNet.WorkMode == ETH_MODE_TCP_CLIENT) {\r\n\t\tcmdBuf[idx++] = 0x01;\r\n\t} else {\r\n\t\tcmdBuf[idx++] = 0x02;\r\n\t}\r\n\r\n\tCAT1_DBG_LOG("ETH Write IP/Mode, len=%d", idx);\r\n'"