/******************************************************************************
 * Include files
 ******************************************************************************/
#include <stdlib.h>
#include "main.h"
#include "UartDebug.h"
#include "bsp.h"
#include "Algorithm.h"
#include "SGCP.h"
#include "Update.h"
#include "sx127x.h"
#include "lsm6dsl_app.h"
#include "mmc5983.h"

AppDetect_t App;

extern uint32_t LocalType;
extern uint32_t CommWay;
extern uint32_t DeviceSign;
extern uint32_t AddNumber;

extern uint8_t	LocalMAC[6];			//本机MAC地址
extern uint8_t	GatewayMAC[6];			//网关MAC地址，注册时全为0
extern uint8_t LocalDataPack[sizeof(SGCP.DevData.LaserTracing)];		//本机数据包				//本机数据包

bool MainDispEn = true;
bool DataDispEn = true;
/*****************************************************************************************
* 函数名称: MainDBGOnOff
* 功能描述: 主调试信息开关函数
* 参    数: OnOff,开关
* 返 回 值: 无
*****************************************************************************************/
void MainDBGOnOff(bool OnOff)
{
	MainDispEn = OnOff;
	if(OnOff)
		DBG_LOG("\r\nMain Display Enable!\r\n\r\n");
	else
		DBG_LOG("\r\nMain Display Disable!\r\n\r\n");
}
/*****************************************************************************************
* 函数名称: DataDBGOnOff
* 功能描述: 数据信息开关函数
* 参    数: OnOff,开关
* 返 回 值: 无
*****************************************************************************************/
void DataDBGOnOff(bool OnOff)
{
	DataDispEn = OnOff;
	if(OnOff)
		DBG_LOG("\r\nData Display Enable!\r\n\r\n");
	else
		DBG_LOG("\r\nData Display Disable!\r\n\r\n");
}
void Lsm6dDataProcessCallBack(float *Acc,	float *Gy)
{
	memcpy(App.Sensor.acce, Acc, 12);
	memcpy(App.Sensor.gy, Gy, 12);
	//MAIN_DBG_LOG("acc_X:%07.1f, acc_Y:%07.1f, acc_Z:%07.1f\r\n", App.Sensor.acce[X], App.Sensor.acce[Y],App.Sensor.acce[Z]);	
	//MAIN_DBG_LOG("gy_X:%07.1f, gy_Y:%07.1f, gy_Z:%07.1f\r\n", App.Sensor.gy[X], App.Sensor.gy[Y],App.Sensor.gy[Z]);			
	App.AccRead_EndFlag = true;
}

void MmcDataProcessCallBack(float *Mag)
{
	memcpy(App.Sensor.mag, Mag, 12);	
	//MAIN_DBG_LOG("mag_X:%07.1f, mag_Y:%07.1f, mag_Z:%07.1f\r\n", App.Sensor.mag[X], App.Sensor.mag[Y],App.Sensor.mag[Z]);		
	App.MagRead_EndFlag = true;                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
}

static void AppInit(void)
{
	memset(&App, 0x00, sizeof(App));
	READ_APP_PARA((uint32_t *)&App.Para);
	
#if(USE_BOOTLOADER)
	UpdateInit();
	
	for(int i = 0; i < 6; i++) {
		LocalMAC[i] = *((volatile const uint8_t *)(0x00002800 + i));
	}
	memcpy(&App.Para.BLPara.DevMac, &LocalMAC[0], 6);
	LocalType = (App.Para.BLPara.DevMac[0] | (App.Para.BLPara.DevMac[1] << 8));		//本机设备类型
	CommWay = App.Para.BLPara.DevMac[2];			//本机通讯方式
	DeviceSign = App.Para.BLPara.DevMac[3] & 0x80;	//本机设备标志
	AddNumber = ((App.Para.BLPara.DevMac[3] << 16)+ (App.Para.BLPara.DevMac[4] << 8) + App.Para.BLPara.DevMac[5]) - 0x800000;		//本机地址编号，数字部分对应唯一地址编号
#else
	LocalType = LASER_TRACING;			//本机设备类型
	CommWay = LORA;						//本机通讯方式
	DeviceSign = MASTER;					//本机设备标志
	AddNumber = 0x000023 + DeviceSign;//本机地址编号，数字部分对应唯一地址编号
	App.Para.BLPara.LoraFreq = CH0;
	LocalMAC[0] = LocalType & 0xFF;	//本机MAC地址
	LocalMAC[1] = (LocalType >> 8) & 0xFF;
	LocalMAC[2] = CommWay;
	LocalMAC[3] = (AddNumber >> 16) & 0xFF;
	LocalMAC[4] = (AddNumber >> 8) & 0xFF;
	LocalMAC[5] = AddNumber & 0xFF;
#endif
	//09 00 01 00 00 00
	
	if(App.Para.FactoryFlag != 0x00)
	{
		App.Para.FactoryFlag = 0x00;
		/*校准参数初始化*/
		App.Para.CaliPara.PitchZero = 0;
		App.Para.CaliPara.RollZero = 0;
		App.Para.CaliPara.YawZero = 0;
		
		App.Para.Rs485Ch1.Enable = true;
		App.Para.Rs485Ch1.UpgradeEnable = true;
		App.Para.Rs485Ch1.Addr = 1;
		App.Para.Rs485Ch1.BaudRate = 9600;

		App.Para.Rs485Ch2.Enable = false;
		App.Para.Rs485Ch2.UpgradeEnable = false;
		App.Para.Rs485Ch2.Addr = 1;
		App.Para.Rs485Ch2.BaudRate = 500000;
		
		App.Para.Lora.OnOff = true;
		App.Para.Lora.ucChannel = 8;
		App.Para.Lora.ucPower = 20;
		App.Para.Lora.SignalBw = 8;
		App.Para.Lora.SpreadFactor = 9;
		App.Para.Lora.ErrorCoding = 2;
		App.Para.Lora.RegPreamble = 10;
		App.Para.BLPara.LoraFreq = CH0; 
		
		App.Para.Layout.CollectTime = 10;
		App.Para.Layout.ReportInterval = 40;
		App.Para.Layout.ERInterval = 4;
		App.Para.Layout.ERTime = 40;
	}
	
	if(App.Para.BLPara.LoraFreq < 410000000 || App.Para.BLPara.LoraFreq > 525000000)
		App.Para.BLPara.LoraFreq = CH0;
	App.Para.Lora.FreqCent = App.Para.BLPara.LoraFreq;
	SX1276LoRaWriteFreq(App.Para.Lora.FreqCent);		//Lora频率:433100000ul + 200000*N
	
	if(App.Para.Rs485Ch1.Addr > 16 || App.Para.Rs485Ch1.Addr < 1){
		App.Para.Rs485Ch1.Addr = 1;
	}
	if(App.Para.Rs485Ch2.Addr > 16 || App.Para.Rs485Ch2.Addr < 1){
		App.Para.Rs485Ch2.Addr = 1;
	}
	if(App.Para.Layout.CollectTime > 240 || App.Para.Layout.CollectTime < 1) {
		App.Para.Layout.CollectTime = 10;
	}
	if(App.Para.Layout.ReportInterval > 1440 || App.Para.Layout.ReportInterval < 10) {
		App.Para.Layout.ReportInterval = 40;
	}
	if(App.Para.Layout.ERInterval > 10 || App.Para.Layout.ERInterval < 2) {
		App.Para.Layout.ERInterval = 4;
	}
	if(App.Para.Layout.ERTime > 240 || App.Para.Layout.ERTime < 20) {
		App.Para.Layout.ERTime = 40;
	}
	SAVE_APP_PARA((uint32_t *)&App.Para);
	
	LpUart0Init(App.Para.Rs485Ch1.BaudRate);//低功耗串口初始化
	
	LORAIntEnable();
	LoraInit();						//< LORA芯片初始化
	FeedDog();
	
	Lsm6dslInit();
	MMC5983Init();
	MMC5983Stop();
	Lsm6dsStop();
	ACCandMMCIntEnable();
	
	LPTimer0_OFF();
					
	uint32_t seed = 0;//< 随机数初始化
	seed = seed + LocalMAC[2];
	seed = (seed << 8) + LocalMAC[3];
	seed = (seed << 8) + LocalMAC[4];
	seed = (seed << 8) + LocalMAC[5];
	srand(seed);
	App.Nonce = rand();
	
	SGCP.LoginOk = false;
	SGCP.LoginMess = false;
	SGCP.LaserOnOff = false;
	SGCP.MasterCaliOk = true;
	SGCP.DeviceReadDataOk = false;
	SGCP.TimingAcquisition = false;
	
	App.Login2Min30SCount = 0;
	App.Login30MinCount = 0;
	App.RepeLoginCount = 0;
	App.LoginFlag = false;
	App.Login_RTC = false;
	App.Login_LPTimer0 = true;
	//LPTimer0_ON((App.Nonce % 1200) + 300);//定时30s+随机2分钟，最小间隙100ms
	LPTimer0_ON(50);//5秒后注册
	if(App.Para.LaserTimerMinutes == 0)
		App.Para.LaserTimerMinutes = 10;
	SGCP.LaserTimerMinutes = App.Para.LaserTimerMinutes;
	App.UploadFlag = false;
	App.Upload_LPTimer0 = false;
	
	App.Coll_N = 0;
	App.Repor_N = 0;
	App.ERInterval_N = 0;
	App.ERTime_N = 0;
	App.ERFlag = false;
	
	App.MagRead_EndFlag = false;
	App.AccRead_EndFlag = false;
	App.UpdateOk = false;
	App.CaliFlag = false;
	
	App.Status = APP_STATUS_ON;
	App.TD1mSDelayCnt = (App.Nonce % 2000) + 2000;
}

static void ReadDataLoopHandler(void)
{
	switch (App.RDStatus)
   {
   	case READDATA_STATUS_IDLE:{
   	break;}
		
		case READDATA_STATUS_UPDAING:{
			DATA_DBG_LOG("<------------ Sensor Data Updaing ------------> \r\n");
			App.UpdateOk = false;
			Lsm6dsStart();
			MMC5983Start();
			App.ReadData1mSDelayCnt = 2000;
			App.RDStatus = READDATA_STATUS_WAIT_UPDAING;
   	break;}
		
		case READDATA_STATUS_WAIT_UPDAING:{
			if(App.ReadData1mSDelayCnt <= 0){
				if(App.AccRead_EndFlag == false)
					DATA_DBG_LOG("Lsm6dsl Get Data TimeOut...\r\n");								
				if(App.MagRead_EndFlag == false)
					DATA_DBG_LOG("MMC5983 Get Data TimeOut...\r\n");
				App.RDStatus = READDATA_STATUS_DATA_HANDLE;
			}
			else if(App.MagRead_EndFlag == true
				&& App.AccRead_EndFlag == true){
				App.RDStatus = READDATA_STATUS_DATA_HANDLE;
			}
		break;}
		
		case READDATA_STATUS_DATA_HANDLE:{
			if(App.MagRead_EndFlag == false || App.AccRead_EndFlag == false){
				DATA_DBG_LOG("<------------ Sensor Data Upda End ------------> \r\n");
				App.RDStatus = READDATA_STATUS_IDLE;
				App.UpdateOk = false;
				break;
			}
			App.MagRead_EndFlag = false;
			App.AccRead_EndFlag = false;
			
			IMU_Update(0, App.Sensor.acce, App.Sensor.mag, &App.AHRSData.Rad, &App.AHRSData.Deg);
			App.ConvertedData.Pitch = (int16_t)(App.AHRSData.Deg.pitch * 10);
			App.ConvertedData.Roll = (int16_t)(App.AHRSData.Deg.roll * 10);
			App.ConvertedData.Yaw = (int16_t)(App.AHRSData.Deg.yaw * 10);
			DATA_DBG_LOG("PitchAngle:%06.1f, RollAngle:%06.1f, YawAngle:%06.1f\r\n",App.AHRSData.Deg.pitch, App.AHRSData.Deg.roll, App.AHRSData.Deg.yaw);
			
			if(SGCP.MasterCaliOk == true)
			{
				SGCP.MasterCaliOk = false;
				App.CaliFlag = true;
				App.Para.CaliPara.PitchZero = App.ConvertedData.Pitch;
				App.Para.CaliPara.RollZero = App.ConvertedData.Roll;
				App.Para.CaliPara.YawZero = App.ConvertedData.Yaw;
//				App.Para.CaliPara.PitchZero = 0;
//				App.Para.CaliPara.RollZero = 0;
//				App.Para.CaliPara.YawZero = 0;
				SAVE_APP_PARA((uint32_t *)&App.Para);
			}
			if(App.CaliFlag == true && App.ERFlag == false)
			{
				int16_t PitchDiff,RollDiff;
				PitchDiff = App.ConvertedData.Pitch - App.Para.CaliPara.PitchZero;
				RollDiff = App.ConvertedData.Roll - App.Para.CaliPara.RollZero;
				if((PitchDiff > ERINTERVAL_VPT) || (RollDiff > ERINTERVAL_VPT))
				{	
					//触发紧急上报
					App.ERFlag = true;
					DATA_DBG_LOG("PitchDiff=%04d, PitchDiff=%04d\r\n", PitchDiff,RollDiff);
					DATA_DBG_LOG("Start emergency reporting!\r\n");
					DATA_DBG_LOG("ERInterval: %dMin, ERTime: %dMin\r\n", App.Para.Layout.ERInterval/2, App.Para.Layout.ERTime/2);
				}
			}

			SGCP.DevData.LaserTracing.PitchAngle = App.ConvertedData.Pitch;
			SGCP.DevData.LaserTracing.RollAngle = App.ConvertedData.Roll;
			SGCP.DevData.LaserTracing.YawAngle = App.ConvertedData.Yaw;
			
#if (USE_VBAT_AD == 1)
	SGCP.DevData.LaserTracing.MasterDev.BatLevel = VBAT_Percentage;
#else
	SGCP.DevData.LaserTracing.MasterDev.BatLevel = 0x00;
#endif 
#if (SGCP_SELECT == 1 || SGCP_SELECT == 2)
	SX1276LoCalcRssiSnr(&SGCP.DevData.LaserTracing.MasterDev.RSSI, &SGCP.DevData.LaserTracing.MasterDev.Nsr);//获取信号强度
#else
	SGCP.DevData.LaserTracing.MasterDev.RSSI = 0x00;
	SGCP.DevData.LaserTracing.MasterDev.Nsr = 0x00;
#endif
			
			memcpy(LocalDataPack, &SGCP.DevData.LaserTracing, sizeof(LocalDataPack));
			DATA_DBG_LOG("<------------ Sensor Data Upda End ------------> \r\n");
			//App.RDStatus = READDATA_STATUS_UPDAING;//持续工作
			App.RDStatus = READDATA_STATUS_IDLE;
			App.UpdateOk = true;
   	break;}
   }
}

static void AppLoopHandler(void)
{
	switch(App.Status) {
		case APP_STATUS_IDLE:{
			break;}
			
		case APP_STATUS_SLEEP:{
			MAIN_DBG_LOG("Sleep...\r\n\n\n");
			FeedDog();
			EnterDeepSleep();
			FeedDog();
			
			WakeUpInit();
			App.Status = APP_STATUS_ON;
		break;}
		
		case APP_STATUS_ON:{
			if(App.TD1mSDelayCnt <= 0){
				App.TD1mSDelayCnt = 300;//唤醒后待机时间
				App.Status = APP_STATUS_ACTION;
			}
		break;}
		
		case APP_STATUS_OFF:{
			LED_OFF();
			App.Status = APP_STATUS_SLEEP;
			MAIN_DBG_LOG("Power Off...\r\n");
		break;}
		
		case APP_STATUS_ACTION:{
			 if(SGCP.InStatus != IN_STATUS_IDLE){
				 break;
			 }
			else if(SGCP.LoginOk == false && App.LoginFlag == true && SGCP.GWStatus == GW_STATUS_IDLE)//设备注册
			{
				PrintfMess();
				App.LoginFlag = false;
				LPTimer0_OFF();//关闭低功耗定时器
				SGCP.GWStatus = GW_STATUS_LOGIN;//注册
				App.Status = APP_STATUS_WAIT_LOGIN;
			}
			else if(SGCP.TimingAcquisition == true && App.RDStatus == READDATA_STATUS_IDLE)//设备数据获取
			{
				PrintfMess();
				SGCP.TimingAcquisition = false;
				App.RDStatus = READDATA_STATUS_UPDAING;
				App.Status = APP_STATUS_ACTION;
				App.TD1mSDelayCnt = 1000;
			}
			else if(SGCP.LoginOk == true && App.UploadFlag == true && SGCP.GWStatus == GW_STATUS_IDLE && App.UpdateOk == true)
			{
				PrintfMess();
				App.UploadFlag = false;
				LPTimer0_OFF();//关闭低功耗定时器
				SGCP.GWStatus = GW_STATUS_UPLOAD_SENSOR;//上传
				App.Status = APP_STATUS_WAIT_UPLOAD;
			}
			else if(SGCP.LaserOnOff == true && SGCP.LaserTimerMinutes > 0 && SGCP.LaserTimerCount == 0 && SGCP.GWStatus == GW_STATUS_IDLE)
			{
				SGCP.LaserOnOff = false;
				SGCP.GWStatus = GW_STATUS_LASER_STARES;
			}
			else if(App.RDStatus == READDATA_STATUS_IDLE
				&& SGCP.GWStatus == GW_STATUS_IDLE
			   && SGCP.InStatus == IN_STATUS_IDLE
				&& SGCP.TimingAcquisition == false
				&& App.TD1mSDelayCnt == 0
				&& App.ReadData1mSDelayCnt == 0
				&& SGCP.LaserOnOff == false
				&& App.AttTestMode == false)
			{
				//App.Status = APP_STATUS_ACTION;
				App.Status = APP_STATUS_OFF;
			}
		break;}
		case APP_STATUS_WAIT_LOGIN:{
			if(SGCP.LoginMess == true)
			{
				if(SGCP.LoginOk == false)
				{
					App.Login2Min30SCount++;
					if(App.Login2Min30SCount >= 3)
					{
						PrintfMess();
						MAIN_DBG_LOG("Number of registration failures:%d\r\n",App.Login2Min30SCount);
						MAIN_DBG_LOG("Login RTC Open\r\n");
						App.Login2Min30SCount = 0;
						App.Login30MinCount = 0;
						App.Login_RTC = true;//启动30分注册定时器		
					}
					else
					{
						PrintfMess();
						App.Login_LPTimer0 = true;
						LPTimer0_ON((App.Nonce % 1200) + 300);//定时30s+随机2分钟，最小间隙100ms
						//LPTimer0_ON(100);//定时10s
						MAIN_DBG_LOG("Number of registration failures:%d\r\n",App.Login2Min30SCount);
						MAIN_DBG_LOG("Login LPTimer0 Open\r\n");
					}
				}
				else if(SGCP.LoginOk == true)
				{
					App.Login2Min30SCount = 0;
					App.Login30MinCount = 0;
					App.Upload45S10SCount = 0;
					App.UploadFlag = true;
					App.RDStatus = READDATA_STATUS_UPDAING;
				}
				SGCP.LoginMess = false;
				App.TD1mSDelayCnt = 1000;
				App.Status = APP_STATUS_ACTION;
			}
		break;}
		
		case APP_STATUS_WAIT_UPLOAD:{
			if(SGCP.UploadMess == true)
			{
				if(SGCP.UploadOk == false)
				{	
					App.Upload45S10SCount++;
					if(App.Upload45S10SCount >= 3)
					{
						PrintfMess();
						MAIN_DBG_LOG("Number of failed uploads:%d\r\n",App.Upload45S10SCount);
            MAIN_DBG_LOG("Resend registration information.\r\n");
            App.Upload45S10SCount = 0;
            SGCP.LoginOk = false;
            App.LoginFlag = true;
					}
					else
					{
						PrintfMess();
						App.Upload_LPTimer0 = true;
						LPTimer0_ON((App.Nonce % 100) + 450);//随机延时100~10000ms+45秒后重新发送
						//LPTimer0_ON(100);//定时10s
						MAIN_DBG_LOG("Number of failed uploads:%d\r\n",App.Upload45S10SCount);
						MAIN_DBG_LOG("Upload LPTimer0 Open\r\n");
					}
				}
				else if(SGCP.UploadOk == true)
				{
					App.Upload45S10SCount = 0;
				}
				SGCP.UploadMess = false;
				App.TD1mSDelayCnt = 1000;
				App.Status = APP_STATUS_ACTION;
			}
		break;}
	}
}

static void App1mSRoutine(void)
{
	if(App.TD1mSDelayCnt > 0)
		App.TD1mSDelayCnt--;
	if(App.ReadData1mSDelayCnt > 0)
		App.ReadData1mSDelayCnt--;
	App.FeedDogDlyCnt++;
	if(App.AttTestMode == true && App.AttTestCnt > 0)
		App.AttTestCnt--;
}

void FeedDogHandler(void)
{
	if(App.FeedDogDlyCnt >= 200) {
		FeedDog(); 
		App.FeedDogDlyCnt = 0;
	}
}

void SystemResetHandler(void)
{
	//系统定时重启
	if(App.SysResetTimeCnt > SYSTEM_TIMING_LOGIN) {	
		delay_ms(5);
		SystemReset();
		while(1);
	}
}

/**
 ******************************************************************************
 ** \brief  Main function of project
 **
 ** \return uint32_t return value, if needed
 **
 ** This sample
 **
 ******************************************************************************/
int32_t main(void)
{	
	BspInit(); 
	delay_ms(3000);//上电延时，等待从设备启动
	AppInit();
	
	DBG_LOG("\r\n\r\n");
	DBG_LOG("****************************************************\r\n");
	DBG_LOG("**                                                **\r\n");
	DBG_LOG("**                LaserTracing                 	**\r\n");
	DBG_LOG("**                SoftWare V:%d.%d                  **\r\n", SOFTWARE_VERSION / 10, SOFTWARE_VERSION % 10);
	DBG_LOG("**                HardWare V:%d.%d                  **\r\n", HARDWARE_VERSION / 10, HARDWARE_VERSION % 10);
	DBG_LOG("**         Compile: %s %s          **\r\n", __DATE__, __TIME__);
	DBG_LOG("**                                                **\r\n");
	DBG_LOG("****************************************************\r\n\r\n");
	//09 00 01 00 00 00
	
	while (1) {
#if(USE_VBAT_AD == 1)
		ADCLoopHandler();
#endif
#if(USE_WDT == 1)
		FeedDogHandler();
#endif
#if(USE_DEBUG == 1)
		DebugLoopHandler();
#endif
		Lsm6dslLoopHandler();
		MMC5983LoopHandler();
		ReadDataLoopHandler();
		GwRevLoopHandler();
		InRevLoopHandler();
		AppLoopHandler();

#if(USE_DEBUG == 1)
	if(App.AttTestMode == true)
	{
		if(App.AttTestCnt == 0)
		{
			App.AttTestCnt = 200;
			SGCP.TimingAcquisition = true;
		}
		if(App.UpdateOk == true)
		{
			App.UpdateOk = false;
			DBG_LOG("Pitch:%.1f Roll:%.1f Yaw:%.1f\r\n",
				App.ConvertedData.Pitch / 10.0,
				App.ConvertedData.Roll / 10.0,
				App.ConvertedData.Yaw / 10.0);
		}
	}
#endif
	}
}
/*******************************************************************************
 * 中断回调函数
 ******************************************************************************/
void SysTick_CallBack(void)
{
	App1mSRoutine();
	SGCP1mSRoutine();
	Debug1mSRoutine();
	Lsm6dsl1mSRoutine();
	MMC59831mSRoutine();
}

void RtcIRQHander(void)
{
	//SGCP.TimingAcquisition = true;		//30S更新一次数据
	if(SGCP.LoginOk == true)
	{		
		App.RepeLoginCount++;
		if(App.RepeLoginCount >= SYSTEM_TIMING_LOGIN){
			MAIN_DBG_LOG("24h Repetition Login\r\n");
			App.RepeLoginCount = 0;
			SGCP.LoginOk = false;//24h重复注册
			App.Login2Min30SCount = 0;
			App.Login30MinCount = 0;
			App.Login_RTC = false;//关闭30分注册定时器		
			
      App.Login_LPTimer0 = true;
			LPTimer0_ON((App.Nonce % 1200) + 300);//定时30s+随机2分钟，最小间隙100ms
			MAIN_DBG_LOG("Login LPTimer0 Open\r\n");
		}
		
		App.Coll_N++;
		if(App.Coll_N >= App.Para.Layout.CollectTime)
		{
			App.Coll_N = 0;
			SGCP.TimingAcquisition = true;	//定时更新数据
		}
		
		if(App.ERFlag == true)
		{
			App.ERInterval_N++;
			App.ERTime_N++;
			if(App.ERInterval_N >= App.Para.Layout.ERInterval)
			{
				App.ERInterval_N = 0;
				App.UploadFlag = true;
			}
			if(App.ERTime_N >= App.Para.Layout.ERTime)
			{
				App.ERTime_N = 0;
				App.ERFlag = false;
				SGCP.MasterCaliOk = true;//紧急上报时间结束，重新校准参数
			}
		}
		else{
			App.Repor_N++;
			if(App.Repor_N >= App.Para.Layout.ReportInterval)
			{
				App.Repor_N = 0;
				App.UploadFlag = true;
			}
		}
	}
	
	if(App.Login_RTC == true)
	{
		App.Login30MinCount++;
		if(App.Login30MinCount >= ERR_TIMING_LOGIN)//30分钟重置注册错误信息
		{
			PrintfMess();
			App.Login30MinCount = 0;
			App.Login_RTC = false;//关闭30分注册定时器		
			MAIN_DBG_LOG("Login RTC Close\r\n");
			
			App.Login_LPTimer0 = true;
			LPTimer0_ON((App.Nonce % 1200) + 300);//定时30s+随机2分钟，最小间隙100ms
			//LPTimer0_ON(100);//定时10s
			MAIN_DBG_LOG("Login LPTimer0 Open\r\n");
		}
	}

	if(SGCP.LaserOnOff == true && SGCP.LaserTimerCount > 0)
	{
		SGCP.LaserTimerCount--;
	}
}
void LPTimer0IRQHander(void)
{	
	if(App.Login_LPTimer0 == true)
	{
		App.Login_LPTimer0 = false;
		App.LoginFlag = true;
	}
	if(App.Upload_LPTimer0 == true)
	{
		App.Upload_LPTimer0 = false;
		App.UploadFlag = true;
	}
}