feat: 新增全功率运行时间段(FPO)功能

- bsp.h: LayoutPara_t 新增 FPOTimeStart/FPOTime 字段, 移除BOM, 声明TimeGet
- main.h: 声明 IsFullPowerTime
- main.c: 新增 IsFullPowerTime() 判断函数(支持跨天), 睡眠条件加FPO检查, AppInit中FPO参数初始化与校验
- SGCP.h: 新增 GWTOMD_CMD_SET_FPO=0x0A, GW_STATUS_SET_FPO 枚举, 声明 ToGWSetFPORes
- SGCP.c: 实现 ToGWSetFPORes() 回应帧, GWTOMD_CMD_SET_FPO 接收处理(校验/存Flash), 两个GwRevLoopHandler新增GW_STATUS_SET_FPO case
- UartDebug.c: 新增 fpocfg 调试命令(配置后向网关发送0x0A通知), para输出FPO信息, DEBUG_CMD_CNT 17->18
- bsp.c: TimeGet 去除UTC+8偏移(RTC已存本地时间)

MDK/hc32l17x.uvoptx

@@ -103,7 +103,7 @@
         <bEvRecOn>1</bEvRecOn>
         <bSchkAxf>0</bSchkAxf>
         <bTchkAxf>0</bTchkAxf>
-        <nTsel>12</nTsel>
+        <nTsel>6</nTsel>
         <sDll></sDll>
         <sDllPa></sDllPa>
         <sDlgDll></sDlgDll>
@@ -114,7 +114,7 @@
         <tDlgDll></tDlgDll>
         <tDlgPa></tDlgPa>
         <tIfile></tIfile>
-        <pMon>BIN\CMSIS_AGDI.dll</pMon>
+        <pMon>Segger\JL2CM3.dll</pMon>
       </DebugOpt>
       <TargetDriverDllRegistry>
         <SetRegEntry>
@@ -135,7 +135,7 @@
         <SetRegEntry>
           <Number>0</Number>
           <Key>JL2CM3</Key>
-          <Name>-U4294967295 -O78 -S1 -ZTIFSpeedSel10000 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BC11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8027 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC1000 -FN1 -FF0FlashHC32L17X_128K.FLM -FS00 -FL020000 -FP0($$Device:HC32L170JATA$Flash\FlashHC32L17X_128K.FLM)</Name>
+          <Name>-U12345678 -O78 -S2 -ZTIFSpeedSel5000 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BC11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8027 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC1000 -FN1 -FF0FlashHC32L17X_128K.FLM -FS00 -FL020000 -FP0($$Device:HC32L170JATA$Flash\FlashHC32L17X_128K.FLM)</Name>
         </SetRegEntry>
         <SetRegEntry>
           <Number>0</Number>
@@ -411,7 +411,7 @@
         <bEvRecOn>1</bEvRecOn>
         <bSchkAxf>0</bSchkAxf>
         <bTchkAxf>0</bTchkAxf>
-        <nTsel>12</nTsel>
+        <nTsel>6</nTsel>
         <sDll></sDll>
         <sDllPa></sDllPa>
         <sDlgDll></sDlgDll>
@@ -422,7 +422,7 @@
         <tDlgDll></tDlgDll>
         <tDlgPa></tDlgPa>
         <tIfile></tIfile>
-        <pMon>BIN\CMSIS_AGDI.dll</pMon>
+        <pMon>Segger\JL2CM3.dll</pMon>
       </DebugOpt>
       <TargetDriverDllRegistry>
         <SetRegEntry>
@@ -443,7 +443,7 @@
         <SetRegEntry>
           <Number>0</Number>
           <Key>JL2CM3</Key>
-          <Name>-U4294967295 -O78 -S1 -ZTIFSpeedSel10000 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BC11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8027 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC1000 -FN1 -FF0FlashHC32L17X_128K.FLM -FS00 -FL020000 -FP0($$Device:HC32L170JATA$Flash\FlashHC32L17X_128K.FLM)</Name>
+          <Name>-U12345678 -O78 -S2 -ZTIFSpeedSel5000 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BC11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8027 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC1000 -FN1 -FF0FlashHC32L17X_128K.FLM -FS00 -FL020000 -FP0($$Device:HC32L170JATA$Flash\FlashHC32L17X_128K.FLM)</Name>
         </SetRegEntry>
         <SetRegEntry>
           <Number>0</Number>

Module/LaserTracing_Debug/UartDebug.c

@@ -12,7 +12,7 @@
 
 
 #if (USE_DEBUG != 0)
-#define DEBUG_CMD_CNT					17
+#define DEBUG_CMD_CNT					18
 const DBGFunType DebugFun[DEBUG_CMD_CNT];
 
 volatile DebugChannel_e gDebugChannel = DBG_CH_RS485_1;//上电默认调试口
@@ -214,6 +214,10 @@ static void DebugCmdGetPara(int argc, char *argv[])
 	DBG_LOG("Lora: ch %d, rp %d, fc %d\r\n", App.Para.Lora.ucChannel, App.Para.Lora.RegPreamble, App.Para.Lora.FreqCent);
 	DBG_LOG("LpCfg:  CI:%dsec, RI:%dmin, EI:%dmin, ET:%dmin\r\n", 
 		App.Para.Layout.CollectTime*30, App.Para.Layout.ReportInterval/2, App.Para.Layout.ERInterval/2, App.Para.Layout.ERTime/2);
+	DBG_LOG("FpoCfg: Start:%02d:00, Dur:%dh, End:%02d:00, %s\r\n",
+		App.Para.Layout.FPOTimeStart, App.Para.Layout.FPOTime,
+		(App.Para.Layout.FPOTimeStart + App.Para.Layout.FPOTime) % 24,
+		(IsFullPowerTime() == true) ? "FullPower" : "LowPower");
 	DBG_LOG("Laser: %s, AutoOff: %dmin\r\n",
 		(SGCP.LaserOnOff == true) ? "ON" : "OFF", SGCP.LaserTimerMinutes);
 	struct tm *stime;
@@ -739,6 +743,58 @@ static void DebugCmdLPConfig(int argc, char *argv[])
 	DBG_LOG("The low-power device is configured.\r\n");
 }
 /*****************************************************************************************
+* 函数名称: DebugCmdFPOConfig
+* 功能描述: 全功率运行时间段配置
+* 参    数: argc, 输入参数数量
+						argv, 输入参数
+* 返 回 值: 无
+*****************************************************************************************/
+static void DebugCmdFPOConfig(int argc, char *argv[])
+{
+	DBG_LOG("\r\n");
+	if(argc < 2)
+		return;
+	
+	if(strcmp(argv[1], "?") == 0) {
+		DBG_LOG("Debug Cmd: fpocfg arg1 arg2\r\n");
+		DBG_LOG("  brief --> Configure full-power work period.\r\n");
+		DBG_LOG("  arg1  --> Full-power work start hour. (0~23 hour)\r\n");
+		DBG_LOG("  arg2  --> Full-power work duration. (0~24 hour, 0=off)\r\n\r\n");
+		return;
+	}
+	
+	if(argc < 3)
+		return;
+	
+	uint8_t FPOTimeStart = (uint8_t)atoi(argv[1]);
+	uint8_t FPOTime = (uint8_t)atoi(argv[2]);
+	if(FPOTimeStart > 23) {
+		DBG_LOG("FPOTimeStart Para Error! (0~23)\r\n");
+		return;
+	}
+	if(FPOTime > 24) {
+		DBG_LOG("FPOTime Para Error! (0~24)\r\n");
+		return;
+	}
+	
+	App.Para.Layout.FPOTimeStart = FPOTimeStart;
+	App.Para.Layout.FPOTime = FPOTime;
+	SAVE_APP_PARA((uint32_t *)&App.Para);
+	DBG_LOG("The full-power work period is configured. Start:%02d:00, Dur:%dh, End:%02d:00\r\n",
+		App.Para.Layout.FPOTimeStart, App.Para.Layout.FPOTime,
+		(App.Para.Layout.FPOTimeStart + App.Para.Layout.FPOTime) % 24);
+	
+	if(SGCP.LoginOk)
+	{
+		ToGWSetFPORes();
+		DBG_LOG("FPO config update sent to gateway.\r\n");
+	}
+	else
+	{
+		DBG_LOG("Gateway not logged in, skip sending FPO config update.\r\n");
+	}
+}
+/*****************************************************************************************
 * 函数名称: DebugLaserConfig
 * 功能描述: 激光控制
 * 参    数: argc, 输入参数数量
@@ -1062,6 +1118,16 @@ void DebugCmdHelp(int argc, char *argv[])
 	}
 	DebugCmdLPConfig(argc1, argv1);
 	
+	memset(Data, 0x00, 10);
+	len = strlen("fpocfg ?\0");
+	memcpy(Data, "fpocfg ?\0", len);
+	token = strtok(Data, " ");   // 假设分隔符是空格
+	for(argc1 = 0; (token != NULL && argc1 < 10); argc1++) {
+        argv1[argc1] = token;
+        token = strtok(NULL, " ");
+	}
+	DebugCmdFPOConfig(argc1, argv1);
+	
 	memset(Data, 0x00, 10);
 	len = strlen("laser ?\0");
 	memcpy(Data, "laser ?\0", len);
@@ -1134,6 +1200,7 @@ const DBGFunType DebugFun[DEBUG_CMD_CNT] = {
 	"rs485",				DebugCmdRS485Ctrl,
 	"lora",				DebugLoraConfig,
 	"lpcfg",				DebugCmdLPConfig,
+	"fpocfg",				DebugCmdFPOConfig,
 	"laser",				DebugLaserConfig,
 	"res",				DebugCmdRestoreFactory,
 	"dch",				DebugCmdChannel,

source/inc/SGCP.h

@@ -98,6 +98,7 @@ typedef enum {
 	GW_STATUS_CALI,
 	GW_STATUS_READ_SENSOR,
 	GW_STATUS_SET_COL_TIME,
+	GW_STATUS_SET_FPO,//设置全功率运行时间段
 	GW_STATUS_SYNC_TIME,
 	GW_STATUS_UPLOAD_SENSOR,//主动上报模式时会使用该状态
 	GW_STATUS_WAIT_UPLOAD,//主动上报模式时会使用该状态
@@ -125,7 +126,8 @@ typedef enum {
 	GWTOMD_CMD_LOGIN = 0x00,					//0x00，设备注册
 	GWTOMD_CMD_CALI = 0x01,						//0x01, 校准指令
 	GWTOMD_CMD_READ_UPLOAD_SENSOR = 0x02,			//0x02，读取数据指令or上传数据指令
-	GWTOMD_CMD_SET_COL_TIME = 0x05,			//0x05，设置采集时间间隔
+	GWTOMD_CMD_SET_FPO = 0x0A,             //0x0A, 设置全功率运行时间段（低功耗设备）
+  GWTOMD_CMD_SET_COL_TIME = 0x05,			//0x05，设置采集时间间隔
 	GWTOMD_CMD_SYNC_TIME = 0x06,				//0x06，时间同步 
 	GWTOMD_CMD_SET_LASER = 0x08,//打开or关闭激光
 	GWTOMD_CMD_SIGNAL = 0x09,
@@ -281,6 +283,7 @@ typedef struct {
 extern SGCP_t SGCP;
 
 void SGCP1mSRoutine(void);
+void ToGWSetFPORes(void);
 
 void GwRevLoopHandler(void);
 void MasRevLoopHandler(void);

source/inc/bsp.h

@@ -1,4 +1,4 @@
-#ifndef _BSP_H
+#ifndef _BSP_H
 #define	_BSP_H
 
 #include <stdint.h>
@@ -225,6 +225,8 @@ typedef struct {
 	uint16_t ReportInterval;				//上报时间间隔，设置范围,30*N秒,10<=N<=1440（默认1200秒,N=40）
 	uint8_t ERInterval;						//紧急上报时间间隔,设置范围,30*N秒,2<=N<=10（默认120秒,N=4）
 	uint8_t ERTime;							//紧急上报时长,设置范围,30*N秒,20<=N<=240（默认1200秒,N=40）
+  uint8_t FPOTimeStart;       //每天全功率工作时间起始点时间，设置范围0~23小时整点时间（默认0点整）
+  uint8_t FPOTime;             //每天全功率工作时间时长，设置范围0~24小时（默认0小时）
 	uint32_t	TimeStamp;						//网关返回RTC时间戳
 }__attribute__((packed))LayoutPara_t,*LayoutPara;//上位机下发的配置参数
 
@@ -279,6 +281,7 @@ uint32_t GetSysTick(void);
 void delay_ms(uint32_t ms);
 void Delay(uint32_t time);
 void RTCInit(uint8_t sec);
+void TimeGet(struct tm *cTime);
 void LPTimer0_ON(uint16_t _100ms);
 void LPTimer0_OFF(void);
 void WakeUpInit(void);

source/inc/main.h

@@ -107,6 +107,7 @@ extern AppDetect_t App;
 
 void MainDBGOnOff(bool OnOff);
 void DataDBGOnOff(bool OnOff);
+bool IsFullPowerTime(void);
 
 #endif
 

source/src/SGCP.c

@@ -652,6 +652,46 @@ SGCP.GWRS485Rx.sCmdMDToGW = (GWTOMD_CMD_M)GFHeader->Cmd;
 #endif
 }
 
+/**
+ *******************************************************************************
+ ** \brief 网关设置全功率运行时间段指令回应
+ **
+ ** \param 无（回显已配置的 FPOTimeStart 与 FPOTime，与接收格式一致）
+ **
+ ** \retval 无
+ ******************************************************************************/
+void ToGWSetFPORes(void)
+{
+	uint8_t Pack[256];
+	uint16_t Crc16;
+	uint8_t Len;
+	
+	GatewayFrameHeader GFHeader = (GatewayFrameHeader)Pack;
+	
+	GFHeader->Header = 0x7B;
+	memcpy(&GFHeader->GWAddr[0], &GatewayMAC[0], sizeof(GFHeader->GWAddr));
+	memcpy(&GFHeader->MDAddr[0], &LocalMAC[0], sizeof(GFHeader->MDAddr));
+	GFHeader->Cmd = GWTOMD_CMD_SET_FPO;
+	GFHeader->PayloadLen = 2;
+	
+	Len = sizeof(GatewayFrameHeader_t);
+	
+	Pack[Len++] = App.Para.Layout.FPOTimeStart;
+	Pack[Len++] = App.Para.Layout.FPOTime;
+	
+	Crc16 = CRC_Modbus(CRC16_BASE, Pack, Len);
+	Pack[Len++] = Crc16 & 0x00ff;
+	Pack[Len++] = (Crc16 >> 8) & 0x00ff;
+	
+SGCP.GWRS485Rx.sCmdMDToGW = (GWTOMD_CMD_M)GFHeader->Cmd;
+#if(SGCP_SELECT == 1 || SGCP_SELECT == 2)
+	Sx1276LoRaSendBuffer(Pack, Len);
+#endif
+#if(SGCP_SELECT == 3)
+	LPUart0SendArray(Pack, Len);
+#endif
+}
+
 /**
  *******************************************************************************
  ** \brief 网关时间同步指令回应
@@ -981,29 +1021,69 @@ static void GWRevHandler(void)
 					}
 					else if(PayLoadLen == 10)
 					{
-						App.Para.Layout.CollectTime = LPay->CollectTime/30;
-						App.Para.Layout.ReportInterval = LPay->ReportInterval * 2;							
-						App.Para.Layout.ERInterval = LPay->ERInterval * 2;
-						App.Para.Layout.ERTime = LPay->ERTime * 2;
-						App.Para.Layout.TimeStamp = LPay->TimeStamp;
-						
-						DBG_LOG("The parameters have been updated. CI:%ds, RI:%dmin, EI:%dmin, ET:%dmin\r\n",
-							LPay->CollectTime,
-							LPay->ReportInterval,
-							LPay->ERInterval,
-							LPay->ERTime);
-						
-						int8_t TimeDiff;//时间差
-						int RTCTimes = TimeTs(); 
-						TimeDiff = App.Para.Layout.TimeStamp - RTCTimes;
-						if(TimeDiff > 1 || TimeDiff < -1)
-						{
-							TimeSync(App.Para.Layout.TimeStamp);			//向通讯单元RTC时间寄存器写入时间网关下发的时间
-						}
-						SGCP.UploadOk = true;
-						SGCP.NextGWStatus = GW_STATUS_UPLOAD_SENSOR;
+					App.Para.Layout.CollectTime = LPay->CollectTime/30;
+					App.Para.Layout.ReportInterval = LPay->ReportInterval * 2;							
+					App.Para.Layout.ERInterval = LPay->ERInterval * 2;
+					App.Para.Layout.ERTime = LPay->ERTime * 2;
+					App.Para.Layout.TimeStamp = LPay->TimeStamp;
+					
+					DBG_LOG("The parameters have been updated. CI:%ds, RI:%dmin, EI:%dmin, ET:%dmin\r\n",
+						LPay->CollectTime,
+						LPay->ReportInterval,
+						LPay->ERInterval,
+						LPay->ERTime);
+					
+					int8_t TimeDiff;//时间差
+					int RTCTimes = TimeTs(); 
+					TimeDiff = App.Para.Layout.TimeStamp - RTCTimes;
+					if(TimeDiff > 1 || TimeDiff < -1)
+					{
+						TimeSync(App.Para.Layout.TimeStamp);			//向通讯单元RTC时间寄存器写入时间网关下发的时间
 					}
+					SGCP.UploadOk = true;
+					SGCP.NextGWStatus = GW_STATUS_UPLOAD_SENSOR;
 				}
+				}
+			}
+		break;}
+		
+		case GWTOMD_CMD_SET_FPO:{
+			if(SGCP.LoginOk == true)
+			{
+				uint8_t Start = PayLoad[0];
+				uint8_t Duration = PayLoad[1];
+				if(Start > 23)
+				{
+					DBG_LOG("FPOTimeStart Err\r\n");
+					if(SGCP.GWStatus == GW_STATUS_WAIT_UPLOAD)
+					{
+						SGCP.UploadOk = true;
+						SGCP.NextGWStatus = GW_STATUS_IDLE;
+					}
+					return;
+				}
+				if(Duration > 24)
+				{
+					DBG_LOG("FPOTime Err\r\n");
+					if(SGCP.GWStatus == GW_STATUS_WAIT_UPLOAD)
+					{
+						SGCP.UploadOk = true;
+						SGCP.NextGWStatus = GW_STATUS_IDLE;
+					}
+					return;
+				}
+				if(SGCP.GWStatus == GW_STATUS_WAIT_UPLOAD)
+				{
+					SGCP.UploadOk = true;
+					SGCP.NextGWStatus = GW_STATUS_SET_FPO;
+				}
+				else
+				{
+					SGCP.GWStatus = GW_STATUS_SET_FPO;
+				}
+				App.Para.Layout.FPOTimeStart = Start;
+				App.Para.Layout.FPOTime = Duration;
+				SAVE_APP_PARA((uint32_t *)&App.Para);
 			}
 		break;}
 		
@@ -1471,6 +1551,25 @@ void GwRevLoopHandler(void)
 			SGCP.GW1mSDelayCnt = 5000;
 		break;}
 		
+		case GW_STATUS_SET_FPO:{
+			PrintfMess();
+			if(SGCP.BroadCmd == true)
+			{
+				SGCP.BroadCmd = false;
+				DBG_LOG("Broad FPO Set as %02d:00 ~ %02d:00\r\n", App.Para.Layout.FPOTimeStart,
+					(App.Para.Layout.FPOTimeStart + App.Para.Layout.FPOTime) % 24);
+			}
+			else
+			{
+				ToGWSetFPORes();
+				DBG_LOG("Alone FPO Set as %02d:00 ~ %02d:00\r\n", App.Para.Layout.FPOTimeStart,
+					(App.Para.Layout.FPOTimeStart + App.Para.Layout.FPOTime) % 24);
+			}
+			SGCP.GWStatus = GW_STATUS_WAIT_SUBIDLE;
+			SGCP.NextSubStatus = SUB_STATUS_BROADCAST_SET_COLTIME;
+			SGCP.GW1mSDelayCnt = 5000;
+		break;}
+		
 		case GW_STATUS_SYNC_TIME:{
 			PrintfMess();
 			if(SGCP.BroadCmd == true)
@@ -1795,6 +1894,24 @@ void GwRevLoopHandler(void)
 			SGCP.GWStatus = GW_STATUS_IDLE;
 		break;}
 		
+		case GW_STATUS_SET_FPO:{
+			PrintfMess();
+			if(SGCP.BroadCmd == true)
+			{
+				SGCP.BroadCmd = false;
+				DBG_LOG("Broad FPO Set as %02d:00 ~ %02d:00\r\n", App.Para.Layout.FPOTimeStart,
+					(App.Para.Layout.FPOTimeStart + App.Para.Layout.FPOTime) % 24);
+			}
+			else
+			{
+				ToGWSetFPORes();
+				DBG_LOG("Alone FPO Set as %02d:00 ~ %02d:00\r\n", App.Para.Layout.FPOTimeStart,
+					(App.Para.Layout.FPOTimeStart + App.Para.Layout.FPOTime) % 24);
+			}
+			/*GWRevHandler函数中已经缓存了接收到的全功率运行时间段*/
+			SGCP.GWStatus = GW_STATUS_IDLE;
+		break;}
+		
 		case GW_STATUS_SYNC_TIME:{
 			PrintfMess();
 			if(SGCP.BroadCmd == true)
@@ -1920,8 +2037,8 @@ void LORA_RxCallBack(uint8_t *rBuff, uint8_t rlen)
 {
 	if (rlen > 0 && rBuff[0] == 0x7B && memcmp(&rBuff[7],&LocalMAC[0],6) == 0) // 如果接收到了数据,并且设备地址相同则处理接收到的数据
 	{
-		//< 处理接收到的数据	
-		memcpy(SGCP.GatewayBuff, rBuff, rlen);		
+		//< 处理接收到的数据
+		memcpy(SGCP.GatewayBuff, rBuff, rlen);
 		SGCP.GatewayBuffLen = rlen;
 		GWRevHandler();//网关数据接收处理
 	}

source/src/bsp.c

@@ -647,7 +647,7 @@ void TimeGet(struct tm *cTime)
   cTime->tm_year = BCDToDec(RtcDateTime.u8Year) + 100;
   cTime->tm_mon = BCDToDec(RtcDateTime.u8Month) - 1;
   cTime->tm_mday = BCDToDec(RtcDateTime.u8Day);
-  cTime->tm_hour = BCDToDec(RtcDateTime.u8Hour) + 8;
+  cTime->tm_hour = BCDToDec(RtcDateTime.u8Hour);
   cTime->tm_min = BCDToDec(RtcDateTime.u8Minute);
   cTime->tm_sec = BCDToDec(RtcDateTime.u8Second);
   cTime->tm_isdst = 0;

source/src/main.c

@@ -132,6 +132,9 @@ static void AppInit(void)
 		App.Para.Layout.ReportInterval = 40;
 		App.Para.Layout.ERInterval = 4;
 		App.Para.Layout.ERTime = 40;
+    
+    App.Para.Layout.FPOTime = 0;
+    App.Para.Layout.FPOTimeStart = 0;
 	}
 	
 	if(App.Para.BLPara.LoraFreq < 410000000 || App.Para.BLPara.LoraFreq > 525000000)
@@ -157,6 +160,12 @@ static void AppInit(void)
 	if(App.Para.Layout.ERTime > 240 || App.Para.Layout.ERTime < 20) {
 		App.Para.Layout.ERTime = 40;
 	}
+  if(App.Para.Layout.FPOTimeStart > 23 || App.Para.Layout.FPOTimeStart < 0) {
+		App.Para.Layout.FPOTimeStart = 0;
+	}
+  if(App.Para.Layout.FPOTime > 24 || App.Para.Layout.FPOTime < 0) {
+		App.Para.Layout.FPOTime = 0;
+	}
   if(App.Para.LaserTimerMinutes < 0 || App.Para.LaserTimerMinutes > 240)
 		App.Para.LaserTimerMinutes = 10;
 	SGCP.LaserTimerMinutes = App.Para.LaserTimerMinutes;
@@ -316,6 +325,33 @@ static void ReadDataLoopHandler(void)
    }
 }
 
+bool IsFullPowerTime(void)
+{
+	uint8_t Duration = App.Para.Layout.FPOTime;
+	uint8_t Start = App.Para.Layout.FPOTimeStart;
+	uint8_t Hour;
+	struct tm cTime;
+
+	if(Duration == 0)
+		return false;
+
+	TimeGet(&cTime);
+	Hour = (uint8_t)(cTime.tm_hour % 24);
+
+	if(Start + Duration <= 24)
+	{
+		if(Hour >= Start && Hour < Start + Duration)
+			return true;
+	}
+	else
+	{
+		uint8_t WrapEnd = Start + Duration - 24;
+		if(Hour >= Start || Hour < WrapEnd)
+			return true;
+	}
+	return false;
+}
+
 static void AppLoopHandler(void)
 {
 	switch(App.Status) {
@@ -385,7 +421,8 @@ static void AppLoopHandler(void)
 				&& App.TD1mSDelayCnt == 0
 				&& App.ReadData1mSDelayCnt == 0
 				&& SGCP.LaserOnOff == false
-				&& App.AttTestMode == false)
+				&& App.AttTestMode == false
+				&& IsFullPowerTime() == false)
 			{
 				//App.Status = APP_STATUS_ACTION;
 				App.Status = APP_STATUS_OFF;