1、sx127x.h增加了频率可调函数

2、删除了bsp.h的lora通道配置宏定义
3、删除了SGCP.h中MAC的组成参数定义，改为在main.c中进行定义，当使用bootloader时通过读取BootPara结构体参数获取本机MAC，否则将通过App程序自定义MAC
4、BootPara结构体参数增加

MDK/hc32l17x.uvoptx

@@ -103,7 +103,7 @@
         <bEvRecOn>1</bEvRecOn>
         <bSchkAxf>0</bSchkAxf>
         <bTchkAxf>0</bTchkAxf>
-        <nTsel>12</nTsel>
+        <nTsel>6</nTsel>
         <sDll></sDll>
         <sDllPa></sDllPa>
         <sDlgDll></sDlgDll>
@@ -114,7 +114,7 @@
         <tDlgDll></tDlgDll>
         <tDlgPa></tDlgPa>
         <tIfile></tIfile>
-        <pMon>BIN\CMSIS_AGDI.dll</pMon>
+        <pMon>Segger\JL2CM3.dll</pMon>
       </DebugOpt>
       <TargetDriverDllRegistry>
         <SetRegEntry>
@@ -153,7 +153,24 @@
           <Name></Name>
         </SetRegEntry>
       </TargetDriverDllRegistry>
-      <Breakpoint/>
+      <Breakpoint>
+        <Bp>
+          <Number>0</Number>
+          <Type>0</Type>
+          <LineNumber>43</LineNumber>
+          <EnabledFlag>1</EnabledFlag>
+          <Address>41708</Address>
+          <ByteObject>0</ByteObject>
+          <HtxType>0</HtxType>
+          <ManyObjects>0</ManyObjects>
+          <SizeOfObject>0</SizeOfObject>
+          <BreakByAccess>0</BreakByAccess>
+          <BreakIfRCount>1</BreakIfRCount>
+          <Filename>..\source\src\Update.c</Filename>
+          <ExecCommand></ExecCommand>
+          <Expression>\\hc32l17x\../source/src/Update.c\43</Expression>
+        </Bp>
+      </Breakpoint>
       <WatchWindow1>
         <Ww>
           <count>0</count>
@@ -250,6 +267,11 @@
           <WinNumber>1</WinNumber>
           <ItemText>App.LaserFlag,0x0A</ItemText>
         </Ww>
+        <Ww>
+          <count>19</count>
+          <WinNumber>1</WinNumber>
+          <ItemText>BLPara,0x10</ItemText>
+        </Ww>
       </WatchWindow1>
       <MemoryWindow1>
         <Mm>
@@ -287,7 +309,7 @@
         <AscS3>0</AscS3>
         <aSer3>0</aSer3>
         <eProf>0</eProf>
-        <aLa>0</aLa>
+        <aLa>1</aLa>
         <aPa1>0</aPa1>
         <AscS4>0</AscS4>
         <aSer4>0</aSer4>

Module/LORA/sx127x.h

@@ -802,6 +802,7 @@ typedef struct {
 //////////////////////////////////////////////////////////////////////
 void Sx1276LoRaLoopHandler(void);
 void Sx1276LoRaInit(void (*RxCallBack)(uint8_t *rBuff, uint8_t rlen));
+void SX1276LoRaSetFreqHz(uint32_t dwFreqHz);
 void Sx1276LoRaSendBuffer(uint8_t* pucBuff, uint8_t ucLen);
 uint8_t SX1276LoRaReadChannel(void);
 boolean_t SX1276LoRaWriteChannel(uint8_t Channel);

source/inc/SGCP.h

@@ -6,12 +6,6 @@
 
 #define WORK_MODE 	1//工作模式选择，0、本机为查询模式，1、本机为上报模式(低功耗)
 #define SGCP_SELECT	 1				//协议选择，0、本机为单个主设备接多个子设备，1、本机为单个主设备不接子设备，2、本机为单个子设备
-#define LocalDataLen		sizeof(SGCP.DevData.LaserTracing)//本机设备数据长度
-#define LocalType			LASER_TRACING	//本机设备类型
-#define CommWay			LORA				//本机通讯方式
-#define DeviceSign		MASTER			//本机设备标志
-#define AddNumber			(0x000017 + DeviceSign)//本机地址编号，数字部分对应唯一地址编号
-//09 00 01 00 00 00
 
 typedef struct {//网关与主设备固定帧
 	uint8_t Header;

source/inc/Update.h

@@ -30,6 +30,9 @@ typedef struct {
 	uint32_t PackageCnt;
 	uint32_t AppSize;
 	uint32_t Crc32Check;
+	uint32_t	FirstRunFlag;//第一次运行
+	uint8_t	DevMac[6];//设备MAC
+	uint32_t	LoraFreq;//Lora频率
 }BootPara_t, *BootPara;
 
 //主机下发升级请求载荷结构体
@@ -58,4 +61,5 @@ typedef struct {
 //输出接口
 void Update(uint8_t *PayLoad);
 void UpdateInit(void);
+extern BootPara_t BLPara;
 #endif

source/inc/bsp.h

@@ -24,7 +24,7 @@
 #define  USE_SPI1					  	0					//SPI1开关，0、关闭，1、启用
 
 #define  USE_BOOTLOADER			  	1					//BOOTLOADER开关，0、关闭，1、启用
-#define	USE_LORA_CH					1					//0为测试通道
+#define	USE_LORA_CH					0					//0为测试通道
 
 //<<----------------------------	MCU  -------------------------------->>
 //<   	UART0

source/src/SGCP.c

@@ -11,11 +11,15 @@ IROM1
 串口升级打开USE_BOOTLOADER和点s文件中的LDR     R2, =new_vect_table	;升级时打开
 */
 
+uint32_t LocalType;			//本机设备类型
+uint32_t CommWay;				//本机通讯方式
+uint32_t DeviceSign;			//本机设备标志
+uint32_t AddNumber;			//本机地址编号，数字部分对应唯一地址编号
 //09 00 01 00 00 00
-uint8_t	LocalMAC[6] = {LocalType & 0xFF, (LocalType >> 8) & 0xFF, CommWay, (AddNumber >> 16) & 0xFF, (AddNumber >> 8) & 0xFF, AddNumber & 0xFF};			//本机MAC地址
+uint8_t	LocalMAC[6] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00};//本机MAC地址
 uint8_t	GatewayMAC[6] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00};			//网关MAC地址，注册时全为0
-uint8_t  LocalDataPack[LocalDataLen];		//本机数据包
-
+uint8_t LocalDataPack[sizeof(SGCP.DevData.LaserTracing)];		//本机数据包
+uint8_t LocalDataLen  =  sizeof(SGCP.DevData.LaserTracing);	//本机设备数据长度
 
 SGCP_t SGCP;
 

source/src/Update.c

@@ -1,7 +1,7 @@
 #include "Update.h"
 #include "UartDebug.h"
 
-static BootPara_t BLPara;
+BootPara_t BLPara;
 
 /*****************************************************************************************
 * 函数名称: Update

source/src/main.c

@@ -19,6 +19,11 @@
 
 AppDetect_t App;
 
+extern uint32_t LocalType;
+extern uint32_t CommWay;
+extern uint32_t DeviceSign;
+extern uint32_t AddNumber;
+
 extern uint8_t	LocalMAC[6];			//本机MAC地址
 extern uint8_t	GatewayMAC[6];			//网关MAC地址，注册时全为0
 extern uint8_t LocalDataPack[sizeof(SGCP.DevData.LaserTracing)];		//本机数据包				//本机数据包
@@ -46,7 +51,12 @@ static void AppInit(void)
 	
 #if(USE_BOOTLOADER == 1)
 	UpdateInit();
-	
+	memcpy(&LocalMAC, &BLPara.DevMac[0], 6);
+	SX1276LoRaSetFreqHz(BLPara.LoraFreq);		//Lora频率:433100000ul + 200000*N
+	LocalType = (BLPara.DevMac[0] | (BLPara.DevMac[1] << 8));		//本机设备类型
+	CommWay = BLPara.DevMac[2];			//本机通讯方式
+	DeviceSign = BLPara.DevMac[3] & 0x80;	//本机设备标志
+	AddNumber = ((BLPara.DevMac[3] << 16)+ (BLPara.DevMac[4] << 8) + BLPara.DevMac[5]) - 0x800000;		//本机地址编号，数字部分对应唯一地址编号
 	if(App.Para.FactoryFlag != 0x00)
 	{
 		App.Para.FactoryFlag = 0x00;
@@ -56,6 +66,18 @@ static void AppInit(void)
 		App.Para.CaliPara.YawZero = 0;
 		SAVE_APP_PARA((uint32_t *)&App.Para);
 	}
+#elif
+	LocalType = LASER_TRACING;			//本机设备类型
+	CommWay = LORA;						//本机通讯方式
+	DeviceSign = MASTER;					//本机设备标志
+	AddNumber = 0x000023 + DeviceSign;//本机地址编号，数字部分对应唯一地址编号
+	SX1276LoRaSetFreqHz(CH0);						//Lora频率:433100000ul + 200000*N
+	LocalMAC[0] = LocalType & 0xFF;	//本机MAC地址
+	LocalMAC[1] = (LocalType >> 8) & 0xFF;
+	LocalMAC[2] = CommWay;
+	LocalMAC[3] = (AddNumber >> 16) & 0xFF;
+	LocalMAC[4] = (AddNumber >> 8) & 0xFF;
+	LocalMAC[5] = AddNumber & 0xFF;
 #endif
 	
 	if(App.Para.RS485Addr > 16 || App.Para.RS485Addr < 1){
@@ -85,7 +107,9 @@ static void AppInit(void)
 	DBG_LOG("****************************************************\r\n\r\n");
 	DBG_LOG("RS485Addr: %02X\r\n",App.Para.RS485Addr);
 	DBG_LOG("LocalMAC: %02X %02X %02X %02X %02X %02X\r\n",LocalMAC[0], LocalMAC[1], LocalMAC[2], LocalMAC[3], LocalMAC[4], LocalMAC[5]);
-	DBG_LOG("CollectTime: %ds\r\n\r\n",(App.Para.Layout.CollectTime*30));
+	DBG_LOG("CollectTime: %ds\r\n",(App.Para.Layout.CollectTime*30));
+	DBG_LOG("LoraFreq: %d\r\n\r\n",BLPara.LoraFreq);
+	//09 00 01 00 00 00
 	
 	LORAIntEnable();
 	Sx1276LoRaInit(LORA_RxCallBack);						//< LORA芯片初始化
@@ -480,7 +504,7 @@ void SysTick_CallBack(void)
 void RtcIRQHander(void)
 {
 	//SGCP.TimingAcquisition = true;		//30S更新一次数据
-#if USE_LORA_CH == 0
+#if USE_LORA_CH == CH0
 	App.Tcnt++;//一分钟开启激光3秒
 	if(App.Tcnt >= 2)
 	{