254 lines
8.3 KiB
C
254 lines
8.3 KiB
C
|
/*------------------------------------------------------------------------------
|
||
|
|
* MDK Middleware - Component ::Network:Interface
|
||
|
|
* Copyright (c) 2004-2020 Arm Limited (or its affiliates). All rights reserved.
|
||
|
|
*------------------------------------------------------------------------------
|
||
|
|
* Name: Net_Config_ETH_0.h
|
||
|
|
* Purpose: Network Configuration for ETH Interface
|
||
|
|
* Rev.: V7.3.0
|
||
|
|
*----------------------------------------------------------------------------*/
|
||
|
|
|
||
|
|
//-------- <<< Use Configuration Wizard in Context Menu >>> --------------------
|
||
|
|
|
||
|
|
// <h>Ethernet Network Interface 0
|
||
|
|
#define ETH0_ENABLE 1
|
||
|
|
|
||
|
|
// <o>Connect to hardware via Driver_ETH# <0-255>
|
||
|
|
// <i>Select driver control block for MAC and PHY interface
|
||
|
|
#define ETH0_DRIVER 0
|
||
|
|
|
||
|
|
// <s.17>MAC Address
|
||
|
|
// <i>Ethernet MAC Address in text representation
|
||
|
|
// <i>Value FF-FF-FF-FF-FF-FF is not allowed,
|
||
|
|
// <i>LSB of first byte must be 0 (an ethernet Multicast bit).
|
||
|
|
// <i>Default: "1E-30-6C-A2-45-5E"
|
||
|
|
#define ETH0_MAC_ADDR "1E-30-6C-A2-45-5E"
|
||
|
|
|
||
|
|
// <e>VLAN
|
||
|
|
// <i>Enable or disable Virtual LAN
|
||
|
|
#define ETH0_VLAN_ENABLE 0
|
||
|
|
|
||
|
|
// <o>VLAN Identifier <1-4093>
|
||
|
|
// <i>A unique 12-bit numeric value
|
||
|
|
// <i>Default: 1
|
||
|
|
#define ETH0_VLAN_ID 1
|
||
|
|
// </e>
|
||
|
|
|
||
|
|
// <e>IPv4
|
||
|
|
// <i>Enable IPv4 Protocol for Network Interface
|
||
|
|
#define ETH0_IP4_ENABLE 1
|
||
|
|
|
||
|
|
// <s.15>IP Address
|
||
|
|
// <i>Static IPv4 Address in text representation
|
||
|
|
// <i>Default: "192.168.0.100"
|
||
|
|
#define ETH0_IP4_ADDR "192.168.0.100"
|
||
|
|
|
||
|
|
// <s.15>Subnet mask
|
||
|
|
// <i>Local Subnet mask in text representation
|
||
|
|
// <i>Default: "255.255.255.0"
|
||
|
|
#define ETH0_IP4_MASK "255.255.255.0"
|
||
|
|
|
||
|
|
// <s.15>Default Gateway
|
||
|
|
// <i>IP Address of Default Gateway in text representation
|
||
|
|
// <i>Default: "192.168.0.254"
|
||
|
|
#define ETH0_IP4_GATEWAY "192.168.0.254"
|
||
|
|
|
||
|
|
// <s.15>Primary DNS Server
|
||
|
|
// <i>IP Address of Primary DNS Server in text representation
|
||
|
|
// <i>Default: "8.8.8.8"
|
||
|
|
#define ETH0_IP4_PRIMARY_DNS "8.8.8.8"
|
||
|
|
|
||
|
|
// <s.15>Secondary DNS Server
|
||
|
|
// <i>IP Address of Secondary DNS Server in text representation
|
||
|
|
// <i>Default: "8.8.4.4"
|
||
|
|
#define ETH0_IP4_SECONDARY_DNS "8.8.4.4"
|
||
|
|
|
||
|
|
// <e>IP Fragmentation
|
||
|
|
// <i>This option enables fragmentation of outgoing IP datagrams,
|
||
|
|
// <i>and reassembling the fragments of incoming IP datagrams.
|
||
|
|
// <i>Default: enabled
|
||
|
|
#define ETH0_IP4_FRAG_ENABLE 1
|
||
|
|
|
||
|
|
// <o>MTU size <576-1500>
|
||
|
|
// <i>Maximum Transmission Unit in bytes
|
||
|
|
// <i>Default: 1500
|
||
|
|
#define ETH0_IP4_MTU 1500
|
||
|
|
// </e>
|
||
|
|
|
||
|
|
// <h>ARP Address Resolution
|
||
|
|
// <i>ARP cache and node address resolver settings
|
||
|
|
// <o>Cache Table size <5-100>
|
||
|
|
// <i>Number of cached MAC/IP addresses
|
||
|
|
// <i>Default: 10
|
||
|
|
#define ETH0_ARP_TAB_SIZE 10
|
||
|
|
|
||
|
|
// <o>Cache Timeout in seconds <5-255>
|
||
|
|
// <i>A timeout for cached hardware/IP addresses
|
||
|
|
// <i>Default: 150
|
||
|
|
#define ETH0_ARP_CACHE_TOUT 150
|
||
|
|
|
||
|
|
// <o>Number of Retries <0-20>
|
||
|
|
// <i>Number of Retries to resolve an IP address
|
||
|
|
// <i>before ARP module gives up
|
||
|
|
// <i>Default: 4
|
||
|
|
#define ETH0_ARP_MAX_RETRY 4
|
||
|
|
|
||
|
|
// <o>Resend Timeout in seconds <1-10>
|
||
|
|
// <i>A timeout to resend the ARP Request
|
||
|
|
// <i>Default: 2
|
||
|
|
#define ETH0_ARP_RESEND_TOUT 2
|
||
|
|
|
||
|
|
// <q>Send Notification on Address changes
|
||
|
|
// <i>When this option is enabled, the embedded host
|
||
|
|
// <i>will send a Gratuitous ARP notification at startup,
|
||
|
|
// <i>or when the device IP address has changed.
|
||
|
|
// <i>Default: Disabled
|
||
|
|
#define ETH0_ARP_NOTIFY 0
|
||
|
|
// </h>
|
||
|
|
|
||
|
|
// <e>IGMP Group Management
|
||
|
|
// <i>Enable or disable Internet Group Management Protocol
|
||
|
|
#define ETH0_IGMP_ENABLE 0
|
||
|
|
|
||
|
|
// <o>Membership Table size <2-50>
|
||
|
|
// <i>Number of Groups this host can join
|
||
|
|
// <i>Default: 5
|
||
|
|
#define ETH0_IGMP_TAB_SIZE 5
|
||
|
|
// </e>
|
||
|
|
|
||
|
|
// <q>NetBIOS Name Service
|
||
|
|
// <i>When this option is enabled, the embedded host can be
|
||
|
|
// <i>accessed by its name on local LAN using NBNS protocol.
|
||
|
|
#define ETH0_NBNS_ENABLE 1
|
||
|
|
|
||
|
|
// <e>Dynamic Host Configuration
|
||
|
|
// <i>When this option is enabled, local IP address, Net Mask
|
||
|
|
// <i>and Default Gateway are obtained automatically from
|
||
|
|
// <i>the DHCP Server on local LAN.
|
||
|
|
#define ETH0_DHCP_ENABLE 1
|
||
|
|
|
||
|
|
// <s.40>Vendor Class Identifier
|
||
|
|
// <i>This value is optional. If specified, it is added
|
||
|
|
// <i>to DHCP request message, identifying vendor type.
|
||
|
|
// <i>Default: ""
|
||
|
|
#define ETH0_DHCP_VCID ""
|
||
|
|
|
||
|
|
// <q>Bootfile Name
|
||
|
|
// <i>This value is optional. If enabled, the Bootfile Name
|
||
|
|
// <i>(option 67) is also requested from DHCP server.
|
||
|
|
// <i>Default: disabled
|
||
|
|
#define ETH0_DHCP_BOOTFILE 0
|
||
|
|
|
||
|
|
// <q>NTP Servers
|
||
|
|
// <i>This value is optional. If enabled, a list of NTP Servers
|
||
|
|
// <i>(option 42) is also requested from DHCP server.
|
||
|
|
// <i>Default: disabled
|
||
|
|
#define ETH0_DHCP_NTP_SERVERS 0
|
||
|
|
// </e>
|
||
|
|
|
||
|
|
// Disable ICMP Echo response
|
||
|
|
#define ETH0_ICMP_NO_ECHO 0
|
||
|
|
// </e>
|
||
|
|
|
||
|
|
// <e>IPv6
|
||
|
|
// <i>Enable IPv6 Protocol for Network Interface
|
||
|
|
#define ETH0_IP6_ENABLE 1
|
||
|
|
|
||
|
|
// <s.40>IPv6 Address
|
||
|
|
// <i>Static IPv6 Address in text representation
|
||
|
|
// <i>Use unspecified address "::" when static
|
||
|
|
// <i>IPv6 address is not used.
|
||
|
|
// <i>Default: "fec0::2"
|
||
|
|
#define ETH0_IP6_ADDR "fec0::2"
|
||
|
|
|
||
|
|
// <o>Subnet prefix-length <1-128>
|
||
|
|
// <i>Number of bits that define network address
|
||
|
|
// <i>Default: 64
|
||
|
|
#define ETH0_IP6_PREFIX_LEN 64
|
||
|
|
|
||
|
|
// <s.40>Default Gateway
|
||
|
|
// <i>Default Gateway IPv6 Address in text representation
|
||
|
|
// <i>Default: "fec0::1"
|
||
|
|
#define ETH0_IP6_GATEWAY "fec0::1"
|
||
|
|
|
||
|
|
// <s.40>Primary DNS Server
|
||
|
|
// <i>Primary DNS Server IPv6 Address in text representation
|
||
|
|
// <i>Default: "2001:4860:4860::8888"
|
||
|
|
#define ETH0_IP6_PRIMARY_DNS "2001:4860:4860::8888"
|
||
|
|
|
||
|
|
// <s.40>Secondary DNS Server
|
||
|
|
// <i>Secondary DNS Server IPv6 Address in text representation
|
||
|
|
// <i>Default: "2001:4860:4860::8844"
|
||
|
|
#define ETH0_IP6_SECONDARY_DNS "2001:4860:4860::8844"
|
||
|
|
|
||
|
|
// <h>Neighbor Discovery
|
||
|
|
// <i>Neighbor cache and node address resolver settings
|
||
|
|
// <o>Cache Table size <5-100>
|
||
|
|
// <i>Number of cached node addresses
|
||
|
|
// <i>Default: 5
|
||
|
|
#define ETH0_NDP_TAB_SIZE 5
|
||
|
|
|
||
|
|
// <o>Cache Timeout in seconds <5-255>
|
||
|
|
// <i>Timeout for cached node addresses
|
||
|
|
// <i>Default: 150
|
||
|
|
#define ETH0_NDP_CACHE_TOUT 150
|
||
|
|
|
||
|
|
// <o>Number of Retries <0-20>
|
||
|
|
// <i>Number of retries to resolve an IP address
|
||
|
|
// <i>before NDP module gives up
|
||
|
|
// <i>Default: 4
|
||
|
|
#define ETH0_NDP_MAX_RETRY 4
|
||
|
|
|
||
|
|
// <o>Resend Timeout in seconds <1-10>
|
||
|
|
// <i>A timeout to resend Neighbor Solicitation
|
||
|
|
// <i>Default: 2
|
||
|
|
#define ETH0_NDP_RESEND_TOUT 2
|
||
|
|
// </h>
|
||
|
|
|
||
|
|
// <e>Dynamic Host Configuration
|
||
|
|
// <i>When this option is enabled, local IPv6 address is
|
||
|
|
// <i>automatically configured.
|
||
|
|
#define ETH0_DHCP6_ENABLE 1
|
||
|
|
|
||
|
|
// <o>DHCPv6 Client Mode <0=>Stateless Mode <1=>Statefull Mode
|
||
|
|
// <i>Stateless DHCPv6 Client uses router advertisements
|
||
|
|
// <i>for IPv6 address autoconfiguration (SLAAC).
|
||
|
|
// <i>Statefull DHCPv6 Client connects to DHCPv6 server for a
|
||
|
|
// <i>leased IPv6 address and DNS server IPv6 addresses.
|
||
|
|
#define ETH0_DHCP6_MODE 1
|
||
|
|
|
||
|
|
// <e>Vendor Class Option
|
||
|
|
// <i>If enabled, Vendor Class option is added to DHCPv6
|
||
|
|
// <i>request message, identifying vendor type.
|
||
|
|
// <i>Default: disabled
|
||
|
|
#define ETH0_DHCP6_VCLASS_ENABLE 0
|
||
|
|
|
||
|
|
// <o>Enterprise ID
|
||
|
|
// <i>Enterprise-number as registered with IANA.
|
||
|
|
// <i>Default: 0 (Reserved)
|
||
|
|
#define ETH0_DHCP6_VCLASS_EID 0
|
||
|
|
|
||
|
|
// <s.40>Vendor Class Data
|
||
|
|
// <i>This string identifies vendor type.
|
||
|
|
// <i>Default: ""
|
||
|
|
#define ETH0_DHCP6_VCLASS_DATA ""
|
||
|
|
// </e>
|
||
|
|
// </e>
|
||
|
|
|
||
|
|
// Disable ICMP6 Echo response
|
||
|
|
#define ETH0_ICMP6_NO_ECHO 0
|
||
|
|
// </e>
|
||
|
|
|
||
|
|
// <h>OS Resource Settings
|
||
|
|
// <i>These settings are used to optimize usage of OS resources.
|
||
|
|
// <o>Interface Thread Stack Size <512-65535:4>
|
||
|
|
// <i>Default: 512 bytes
|
||
|
|
#define ETH0_THREAD_STACK_SIZE 512
|
||
|
|
|
||
|
|
// Interface Thread Priority
|
||
|
|
#define ETH0_THREAD_PRIORITY osPriorityAboveNormal
|
||
|
|
|
||
|
|
// </h>
|
||
|
|
// </h>
|
||
|
|
|
||
|
|
//------------- <<< end of configuration section >>> ---------------------------
|