feat(debug): 新增 up 上传网关状态和 reg 重新注册命令

DebugCmd.c

@@ -903,6 +903,76 @@ void DebugCmdRestoreFactory(int argc, char *argv[])
 	while(1);
 }
 
+/*****************************************************************************************
+* 函数名称: DebugCmdUpload
+* 功能描述: 上传当前网关状态
+* 参    数: argc, 输入参数数量
+						argv, 输入参数
+* 返 回 值: 无
+*****************************************************************************************/
+static void DebugCmdUpload(int argc, char *argv[])
+{
+	DBG_LOG("\r\n");
+	if(strcmp(argv[1], "?") == 0) {
+		DBG_LOG("Debug Cmd: up\r\n");
+		DBG_LOG("  brief --> Upload current gateway status to server.\r\n\r\n");
+		return;
+	}
+
+	if(GateWay->SvrRegFlag == false) {
+		DBG_LOG("Server not registered, please register first.\r\n");
+		return;
+	}
+
+	uint8_t MegData[6];
+	uint8_t len = sizeof(GateWayAlarmType_t);
+	MegData[0] = len & 0x00ff;
+	MegData[1] = (len >> 8) & 0x00ff;
+	MegData[2] = NET_COMM_CMD_ALARM;
+
+	MegData[3] = 0x00;
+	MegData[4] = GateWay->ConfigPara.OutageFlag ? 1 : 0;
+	MegData[5] = GateWay->Battery;
+
+	if(CatOneEthSendQueue(MegData, 6) == true) {
+		DBG_LOG("Gateway status uploaded.\r\n");
+	}
+	else {
+		DBG_LOG("Gateway status upload failed.\r\n");
+	}
+}
+
+/*****************************************************************************************
+* 函数名称: DebugCmdRegister
+* 功能描述: 重新向上位机发起注册
+* 参    数: argc, 输入参数数量
+						argv, 输入参数
+* 返 回 值: 无
+*****************************************************************************************/
+static void DebugCmdRegister(int argc, char *argv[])
+{
+	DBG_LOG("\r\n");
+	if(strcmp(argv[1], "?") == 0) {
+		DBG_LOG("Debug Cmd: reg\r\n");
+		DBG_LOG("  brief --> Re-register to the server.\r\n\r\n");
+		return;
+	}
+
+	GateWay->SvrRegFlag = false;
+
+	if(GateWay->ConfigPara.Comm == CATONE_COMM) {
+		CatOneTriggerRegister();
+		DBG_LOG("Trigger Cat1 re-registration immediately.\r\n");
+	}
+	else if(GateWay->ConfigPara.Comm == ETH_COMM) {
+		ETHTriggerRegister();
+		DBG_LOG("Trigger ETH re-registration immediately.\r\n");
+	}
+	else {
+		DBG_LOG("Unknown communication type.\r\n");
+	}
+}
+
 /*****************************************************************************************
 * 函数名称: DebugCmdRestoreFactory
 * 功能描述: 恢复出厂设置
@@ -1851,6 +1921,14 @@ void DebugCmdHelp(int argc, char *argv[])
 	len = strlen("reboot ?\r\n");
 	memcpy(Data, "reboot ?\r\n", len);
 	DebugAnalyze(GateWay, Data, len);
+
+	len = strlen("up ?\r\n");
+	memcpy(Data, "up ?\r\n", len);
+	DebugAnalyze(GateWay, Data, len);
+
+	len = strlen("reg ?\r\n");
+	memcpy(Data, "reg ?\r\n", len);
+	DebugAnalyze(GateWay, Data, len);
 }
 
 const DBGFunType DebugFun[DEBUG_CMD_CNT] = {
@@ -1880,4 +1958,6 @@ const DBGFunType DebugFun[DEBUG_CMD_CNT] = {
 	"lpcfg",			DebugCmdLPConfig,
 	"lora",				DebugLoraConfig,
 	"reboot",			DebugCmdReboot,
+	"up",				  DebugCmdUpload,
+	"reg",				DebugCmdRegister,
 };