fix(cat1,rs485,culs): 修复8项Bug+culs显示优化

修复:
- Cat1OverHandler短AT应答阈值>5->>0, 修复OK/ERROR等4字节响应丢弃
- +LIPURC短数据双重解析, 去重只保留接收线程拦截
- Auch模式CAT_ONE_REV_DATA信号量残留, 加rt_sem_take(0)消费
- sscanf %s限宽%119s防rData[120]栈溢出
- Cat1接收线程先清零CatOneRxLen再处理, 防ISR数据丢失
- RS485同样快照长度先清零再memcpy, 防竞态
- RS485 ch1 upgrade off误写Ch2
- LoraIRQ线程栈512->1024

culs显示优化:
- DevType+SensorNum一行, 每个传感器Master/Slave MAC Type [Laser]
- Bat/Rssi/Snr汇总一行, Online末行
- 空Type填null, 激光设备显示Laser On/Off

Project/GateWay/source/Module/GateWay_Debug/DebugCmd.c

@@ -389,7 +389,7 @@ void DebugCmdRS485Ctrl(int argc, char *argv[])
 			}
 			else if(strstr(argv[3], "off") != NULL){
 				if(idx == 1) {
-					GateWay->ConfigPara.Rs485Ch2.UpgradeEnable = false;
+					GateWay->ConfigPara.Rs485Ch1.UpgradeEnable = false;
 					DBG_LOG("RS485Ch%d Upgrade Off!\r\n", idx);
 				}
 				else if(idx == 2) {
@@ -499,24 +499,21 @@ void DebugCmdLsCommUnit(int argc, char *argv[])
 	for(int i = 0; i < COMMUNIT_NUM_MAX; i++) {
 		if(GateWay->ConfigPara.CommUnitArray[i].RegFlag == true) {
 			CUCnt++;
-			CommUnitPara_t CU;
-			memcpy(&CU, &GateWay->ConfigPara.CommUnitArray[i], sizeof(CommUnitPara_t));
-			DBG_LOG("DevType: %04X\r\n", GateWay->ConfigPara.CommUnitArray[i].CUType);
-			DBG_LOG("DevMac: %02X-%02X-%02X-%02X-%02X-%02X\r\n", 
-							GateWay->ConfigPara.CommUnitArray[i].Mac[0][0], 
-							GateWay->ConfigPara.CommUnitArray[i].Mac[0][1], 
-							GateWay->ConfigPara.CommUnitArray[i].Mac[0][2],
-							GateWay->ConfigPara.CommUnitArray[i].Mac[0][3], 
-							GateWay->ConfigPara.CommUnitArray[i].Mac[0][4], 
-							GateWay->ConfigPara.CommUnitArray[i].Mac[0][5]);
-			DBG_LOG("SensorNum: %d\r\n", GateWay->ConfigPara.CommUnitArray[i].SensorN);
-			DBG_LOG("SensorType: ");
-			for(int j = 0; j < GateWay->ConfigPara.CommUnitArray[i].SensorN; j++) {
-				DBG_LOG("%04X ", GateWay->ConfigPara.CommUnitArray[i].SensorType[j]);
+			CommUnitPara_t *CU = &GateWay->ConfigPara.CommUnitArray[i];
+			DBG_LOG("DevType: %04X, SensorNum: %d\r\n", CU->CUType, CU->SensorN);
+			for(int j = 0; j < CU->SensorN; j++) {
+				DBG_LOG("  %s", j == 0 ? "Master" : "Slave");
+				DBG_LOG(" Mac:%02X-%02X-%02X-%02X-%02X-%02X",
+					CU->Mac[j][0], CU->Mac[j][1], CU->Mac[j][2],
+					CU->Mac[j][3], CU->Mac[j][4], CU->Mac[j][5]);
+				if(CU->SensorType[j] != 0x0000)
+					DBG_LOG(" Type:%04X", CU->SensorType[j]);
+				if(CU->SensorType[j] == 0x0009 || CU->SensorType[j] == 0x0011)
+					DBG_LOG(" Laser:%s", CU->LaserOnOff ? "On" : "Off");
+				DBG_LOG("\r\n");
 			}
-			DBG_LOG("\r\n");
-			DBG_LOG("Online: %s\r\n", GateWay->ConfigPara.CommUnitArray[i].CommStatus ? "Yes" : "No");
-			DBG_LOG("\r\n");
+			DBG_LOG("  Bat:%d%% Rssi:%d Snr:%d\r\n", CU->BatLevel, CU->RSSI, CU->Nsr);
+			DBG_LOG("  Online:%s\r\n\r\n", CU->CommStatus ? "Yes" : "No");
 		}
 	}
 	if(CUCnt ==0) {
@@ -752,9 +749,10 @@ static void DebugCmdSetAuch(int argc, char *argv[])
 		return;
 	}
 
+	GateWay->AuchRegFlag = false;
 	GateWay->ConfigPara.Auch = ch;
-	if(ch == CH_CAT1) CatOneReset();
-	if(ch == CH_ETH)  ETHReset();
+	if(ch == CH_CAT1) { CatOneReset(); CatOneTriggerRegister(); }
+	if(ch == CH_ETH)  { ETHReset();  ETHTriggerRegister(); }
 	DBG_LOG("Set Auch to %s.\r\n", ChannelName(ch));
 	WritePara((uint8_t *)&GateWay->ConfigPara, sizeof(GWConfigPara_t));
 }
@@ -1270,10 +1268,16 @@ void DebugCmdSelDebugChannel(int argc, char *argv[])
 		DBG_LOG("USART1 occupied by dbg/cat1 pair.\r\n");
 		return;
 	}
+	if(ChannelIsActive(GateWay->ConfigPara, ch)
+		&& GateWay->ConfigPara.Duch != ch) {
+		DBG_LOG("Channel %s is occupied.\r\n", ChannelName(ch));
+		return;
+	}
 
 	GateWay->ConfigPara.Duch = ch;
 	if(ch == CH_ETH)  ETHReset();
 	if(ch == CH_CAT1) {
+		CatOneReset();
 		DbgOrCat1Uart_Config(115200);
 		CAT1_ON();
 	}
@@ -1418,7 +1422,8 @@ static void DebugCmdGetPara(int argc, char *argv[])
 	DBG_LOG("CommUnitReadInterval: %d\r\n", GateWay->ConfigPara.CommUnitReadInterval);
 	DBG_LOG("Svr MAC: %02X-%02X-%02X-%02X-%02X-%02X\r\n",
 					GateWay->SvrMac[0], GateWay->SvrMac[1], GateWay->SvrMac[2], GateWay->SvrMac[3], GateWay->SvrMac[4], GateWay->SvrMac[5]);
-	DBG_LOG("MuchReg: %d\r\n", GateWay->MuchRegFlag);
+	DBG_LOG("MuchReg: %s\r\n", GateWay->ConfigPara.Much == CH_NULL ? "null" : 
+    (GateWay->MuchRegFlag ? "true" : "false"));
 	DBG_LOG("AuchReg: %s\r\n", GateWay->ConfigPara.Auch == CH_NULL ? "null" :
 		(GateWay->AuchRegFlag ? "true" : "false"));
 

Project/GateWay/source/User/Src/CatOneTask.c

@@ -299,7 +299,7 @@ void CatOneAtCmdAnalyze(char *RxBuff)
 					return;
 				}
 
-				ret = sscanf(p, "+LIPURC: 0,1,%d,%s\r\n", &rLen, rData);
+				ret = sscanf(p, "+LIPURC: 0,1,%d,%119s\r\n", &rLen, rData);
 				if(ret == 2) {
 					if(rLen < 24)
 						return;
@@ -317,6 +317,10 @@ void CatOneAtCmdAnalyze(char *RxBuff)
 				rt_sem_release(CatOneRev_Sem);
 				return;
 			}
+			if(CatOne.TcpConnFlag && RxBuff[0] > ' ') {
+				DebugAnalyze(CatOne.GateWay, (uint8_t *)RxBuff, strlen(RxBuff));
+				return;
+			}
 		default:
 			CatOne.ATCmdRet = CAT_ONE_RET_ERR;
 
@@ -512,6 +516,7 @@ void CatOneLoopHandler(void)
 
 		case CAT_ONE_REV_DATA:
 			if(CatOne.GateWay->ConfigPara.Much != CH_CAT1) {
+				rt_sem_take(CatOneRev_Sem, 0);
 				CatOne.Cat1Status = CAT_ONE_WAIT_SEND;
 				break;
 			}
@@ -597,7 +602,8 @@ void CatOneLoopHandler(void)
 
 bool UploadSend(uint8_t *sData, uint16_t sLen)
 {
-	rt_mq_send(ChannelMQ(*CatOne.GateWay, CatOne.GateWay->ConfigPara.Much), sData, sLen);
+	if(CatOne.GateWay->ConfigPara.Much != CH_NULL)
+		rt_mq_send(ChannelMQ(*CatOne.GateWay, CatOne.GateWay->ConfigPara.Much), sData, sLen);
 	if(CatOne.GateWay->ConfigPara.Auch != CH_NULL && CatOne.GateWay->ConfigPara.Auch != CatOne.GateWay->ConfigPara.Much) {
 		rt_mq_send(ChannelMQ(*CatOne.GateWay, CatOne.GateWay->ConfigPara.Auch), sData, sLen);
 	}
@@ -627,9 +633,19 @@ void CatOneRev_Thread_Entry(void *parameter)
 		if(result == RT_EOK) {
 			memcpy(RxBuffTemp, CatOneRxBuff, CatOneRxLen);
 			RxBuffTemp[CatOneRxLen] = 0;
+			CatOneRxLen = 0;
+			char *urc = strstr(RxBuffTemp, "+LIPURC: 0,1,");
+			if(urc) {
+				int dLen;
+				if(sscanf(urc, "+LIPURC: 0,1,%d", &dLen) == 1 && dLen < 24) {
+					char *data = strchr(strchr(strchr(urc, ',')+1, ',')+1, ',') + 1;
+					char *end = strchr(data, '\r');
+					if(end) *end = 0;
+					DebugAnalyze(GateWay, (uint8_t *)data, strlen(data));
+				}
+			}
 			CatOneAtCmdAnalyze(RxBuffTemp);
 			memset(CatOneRxBuff, 0x00, CAT_ONE_REV_LEN_MAX);
-			CatOneRxLen = 0;
 		}
 	}
 }
@@ -686,7 +702,7 @@ void Cat1OverHandler(void)
 	if(Cat1RevTimeOutCnt > 0)
 		Cat1RevTimeOutCnt--;
 
-	if(CatOneRxLen > 5 && Cat1RevTimeOutCnt == 0) {
+	if(CatOneRxLen > 0 && Cat1RevTimeOutCnt == 0) {
 		Cat1RevTimeOutCnt = 20;
 		rt_sem_release(CatOneIRQ_Sem);
 	}

Project/GateWay/source/User/Src/LoraTask.c

@@ -92,7 +92,7 @@ void Lora_Thread_Entry(void *parameter)
 		Debug_Printf("CatOneIRQ Sem Create Failed!\r\n");
 	}
 	
-	LoraIRQ_Thread = rt_thread_create("LoraIRQ", LoraIRQ_Thread_Entry, NULL, 512, 3, 20);
+	LoraIRQ_Thread = rt_thread_create("LoraIRQ", LoraIRQ_Thread_Entry, NULL, 1024, 3, 20);
 	if (LoraIRQ_Thread != RT_NULL)
 		rt_thread_startup(LoraIRQ_Thread);
 	

Project/GateWay/source/User/Src/RS485Task.c

@@ -362,10 +362,9 @@ void RS485LoopHandler(GateWayPara GateWay, RS485Para RS485Ch, SensorCommPara SCP
 	
 	result = rt_sem_take(SCPara->RS485Rev_Sem, 200);
 	if(result == RT_EOK) {
-		memcpy(RxBuffTemp, SCPara->RS485RxBuff, SCPara->RS485RxLen);
 		RxLenTemp = SCPara->RS485RxLen;
-//		memset(SCPara->RS485RxBuff, 0x00, RS485_RX_BUFF_LEN_MAX);
 		SCPara->RS485RxLen = 0;
+		memcpy(RxBuffTemp, SCPara->RS485RxBuff, RxLenTemp);
 		if(RxBuffTemp[0] == 0x7A && RS485Ch->UpgradeEnable == true) {	//升级
 			update_process(RxBuffTemp,RxLenTemp);
 		}