feat(debug): 优化culs显示+lpcfg支持MAC参数指定设备

1. culs命令优化:

- 新增LpCfg参数显示(CI/RI/EI/ET)

- FPO状态基于CurFPOTime判断(Pending/FullPower/LowPower)

- 移除para命令中的LpCfg打印(原为常量默认值)

2. lpcfg命令新增MAC参数支持:

- lpcfg <Mac|all> <CI> <RI> <EI> <ET>

- 支持指定单个设备或all配置全部设备

- 与fpocfg命令风格统一

Project/GateWay/source/Module/GateWay_Debug/DebugCmd.c

@@ -541,11 +541,13 @@ void DebugCmdLsCommUnit(int argc, char *argv[])
 					FPOStatus = inFPO ? "FullPower" : "LowPower";
 				}
 				DBG_LOG("  FPO Start:%02d:00, Dur:%dh, End:%02d:00, %s\r\n",
-					CU->FPOTimeStart, CU->FPOTime,
+				CU->FPOTimeStart, CU->FPOTime,
-					(CU->FPOTimeStart + CU->FPOTime) % 24,
+				(CU->FPOTimeStart + CU->FPOTime) % 24,
-					FPOStatus);
+				FPOStatus);
-			}
+		}
-			DBG_LOG("  Online:%s\r\n\r\n", CU->CommStatus ? "Yes" : "No");
+		DBG_LOG("  LpCfg: CI:%dsec, RI:%dmin, EI:%dmin, ET:%dmin\r\n",
+			CU->CollectInterval, CU->ReportInterval, CU->ERInterval, CU->ERTime);
+		DBG_LOG("  Online:%s\r\n\r\n", CU->CommStatus ? "Yes" : "No");
 		}
 	}
 	if(CUCnt ==0) {
@@ -1486,8 +1488,6 @@ static void DebugCmdGetPara(int argc, char *argv[])
 	DBG_LOG("Baudrate %d\r\n", GateWay->ConfigPara.Rs485Ch2.BaudRate);
 	
 	DBG_LOG("Lora: ch %d, rp %d, fc %d\r\n", GateWay->ConfigPara.Lora.ucChannel, GateWay->ConfigPara.Lora.RegPreamble, GateWay->ConfigPara.Lora.FreqCent);
-	DBG_LOG("LpCfg:  CI:%dsec, RI:%dmin, EI:%dmin, ET:%dmin\r\n", 
-		LW_DEV_COLLECT_INTERVAL_MAX, LW_DEV_REPORT_INTERVAL_MAX, LW_DEV_ER_INTERVAL_MAX, LW_DEV_ER_TIME_MAX);
 	struct tm *stime;
 	uint32_t dwStamp = TimeTs();
   stime = localtime(&dwStamp);
@@ -1775,57 +1775,84 @@ static void DebugCmdLPConfig(int argc, char *argv[])
 	uint16_t ReportInterval;		//上报时间间隔
 	uint8_t ERInterval;				//紧急上报时间间隔
 	uint8_t ERTime;						//紧急上报时间
+	uint8_t Mac[6];
+	bool ConfigAll = false;
 
 	if(strcmp(argv[1], "?") == 0) {
-		DBG_LOG("Debug Cmd: lpcfg arg1 arg2 arg3 arg4\r\n");
+		DBG_LOG("Debug Cmd: lpcfg arg1 arg2 arg3 arg4 arg5\r\n");
 		DBG_LOG("  brief --> Configure low-power device parameters.\r\n");
-		DBG_LOG("  arg1  --> Collect interval(30~7200 second)\r\n");
+		DBG_LOG("  arg1  --> Mac(xx-xx-xx-xx-xx-xx) or \"all\"\r\n");
-		DBG_LOG("  arg2  --> Report interval(5~720 minute)\r\n");
+		DBG_LOG("  arg2  --> Collect interval(30~7200 second)\r\n");
-		DBG_LOG("  arg3  --> Emergency reporting interval(1~5 minute)\r\n");
+		DBG_LOG("  arg3  --> Report interval(5~720 minute)\r\n");
-		DBG_LOG("  arg4  --> Emergency reporting time(10~120 minute)\r\n\r\n");
+		DBG_LOG("  arg4  --> Emergency reporting interval(1~5 minute)\r\n");
+		DBG_LOG("  arg5  --> Emergency reporting time(10~120 minute)\r\n\r\n");
 		return;
 	}
 
-	if(argc < 5)
+	if(argc < 6)
 		return;
 
+	if(strcmp(argv[1], "all") == 0) {
+		ConfigAll = true;
+	}
+	else {
+		int ret = sscanf(argv[1], "%02X-%02X-%02X-%02X-%02X-%02X",
+						(int *)&Mac[0], (int *)&Mac[1], (int *)&Mac[2], (int *)&Mac[3], (int *)&Mac[4], (int *)&Mac[5]);
+		if(ret != 6) {
+			DBG_LOG("Mac Para Error! (xx-xx-xx-xx-xx-xx or all)\r\n");
+			return;
+		}
+	}
 
-	CollectInterval = atoi(argv[1]);
+	CollectInterval = atoi(argv[2]);
 	if(CollectInterval < 30 || CollectInterval > 7200) {
 		DBG_LOG("CollectInterval Para Error!\r\n");
 		return;
 	}
 
-	ReportInterval = atoi(argv[2]);
+	ReportInterval = atoi(argv[3]);
 	if(ReportInterval < 5 || ReportInterval > 720) {
 		DBG_LOG("ReportInterval Para Error!\r\n");
 		return;
 	}
 
-	ERInterval = atoi(argv[3]);
+	ERInterval = atoi(argv[4]);
 	if(ERInterval < 1 || ERInterval > 5) {
 		DBG_LOG("ERInterval Para Error!\r\n");
 		return;
 	}
 
-	ERTime = atoi(argv[4]);
+	ERTime = atoi(argv[5]);
 	if(ERTime < 10 || ERTime > 120) {
 		DBG_LOG("ERTime Para Error!\r\n");
 		return;
 	}
 
+	bool Found = false;
 	for(int i = 0; i < COMMUNIT_NUM_MAX; i++) {
 		if(GateWay->ConfigPara.CommUnitArray[i].RegFlag) {
-			GateWay->ConfigPara.CommUnitArray[i].CollectInterval = CollectInterval;
+			if(ConfigAll || memcmp(GateWay->ConfigPara.CommUnitArray[i].Mac[0], Mac, 6) == 0) {
-			GateWay->ConfigPara.CommUnitArray[i].ReportInterval = ReportInterval;
+				GateWay->ConfigPara.CommUnitArray[i].CollectInterval = CollectInterval;
-			GateWay->ConfigPara.CommUnitArray[i].ERInterval = ERInterval;
+				GateWay->ConfigPara.CommUnitArray[i].ReportInterval = ReportInterval;
-			GateWay->ConfigPara.CommUnitArray[i].ERTime = ERTime;
+				GateWay->ConfigPara.CommUnitArray[i].ERInterval = ERInterval;
-			GateWay->ConfigPara.CommUnitArray[i].ConfigFlag = true;
+				GateWay->ConfigPara.CommUnitArray[i].ERTime = ERTime;
-			TrySendFullPowerCmd(GateWay, i);
+				GateWay->ConfigPara.CommUnitArray[i].ConfigFlag = true;
+				Found = true;
+				DBG_LOG("Mac:%02X-%02X-%02X-%02X-%02X-%02X LpCfg set.\r\n",
+					GateWay->ConfigPara.CommUnitArray[i].Mac[0][0], GateWay->ConfigPara.CommUnitArray[i].Mac[0][1],
+					GateWay->ConfigPara.CommUnitArray[i].Mac[0][2], GateWay->ConfigPara.CommUnitArray[i].Mac[0][3],
+					GateWay->ConfigPara.CommUnitArray[i].Mac[0][4], GateWay->ConfigPara.CommUnitArray[i].Mac[0][5]);
+				TrySendFullPowerCmd(GateWay, i);
+			}
 		}
 	}
+	if(!Found) {
+		DBG_LOG("Device not found.\r\n");
+		return;
+	}
 	WritePara((uint8_t *)&GateWay->ConfigPara, sizeof(GWConfigPara_t));
-	DBG_LOG("The low-power device is configured.\r\n");
+	DBG_LOG("LpCfg configured. CI:%dsec, RI:%dmin, EI:%dmin, ET:%dmin\r\n",
+		CollectInterval, ReportInterval, ERInterval, ERTime);
 }
 
 /*****************************************************************************************