1、增加ExclCommUint_t结构体，用于排除指定通讯单元的MAC

2、修复了复位后重复定义各项参数的bug。只有从flash读取到的出厂标志位错误时，才会进入配置默认参数判断，否则会以从flash读取到的数据为配置参数
3、增加CheckCommUnitExcl函数，用于查询mac是否被排除

GateWay_Debug:
1、rs485配置函数增加了boot升级使能功能
2、增加了excu、exdel、exls命令，用于配置排除设备的增、删、查
3、para命令增加显示LpCfg参数

sx127x:
1、lora通道选择取消，通过修改频率来修改通道

Project/GateWay/MDK/GateWay.uvoptx

@@ -410,7 +410,7 @@
         <SetRegEntry>
           <Number>0</Number>
           <Key>JL2CM3</Key>
-          <Name>-U12345678 -O78 -S4 -ZTIFSpeedSel2000 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8027 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO8 -FD1FFF8000 -FC1000 -FN2 -FF0HC32F460_otp.FLM -FS03000C00 -FL03FC -FP0($$Device:HC32F460KETA$FlashARM\HC32F460_otp.FLM) -FF1HC32F460_512K.FLM -FS10 -FL180000 -FP1($$Device:HC32F460KETA$FlashARM\HC32F460_512K.FLM)</Name>
+          <Name>-U12345678 -O78 -S4 -ZTIFSpeedSel2000 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8027 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO11 -FD1FFF8000 -FC1000 -FN2 -FF0HC32F460_otp.FLM -FS03000C00 -FL03FC -FP0($$Device:HC32F460KETA$FlashARM\HC32F460_otp.FLM) -FF1HC32F460_512K.FLM -FS10 -FL180000 -FP1($$Device:HC32F460KETA$FlashARM\HC32F460_512K.FLM)</Name>
         </SetRegEntry>
         <SetRegEntry>
           <Number>0</Number>
@@ -428,93 +428,12 @@
           <Name></Name>
         </SetRegEntry>
       </TargetDriverDllRegistry>
-      <Breakpoint>
+      <Breakpoint/>
-        <Bp>
-          <Number>0</Number>
-          <Type>0</Type>
-          <LineNumber>1598</LineNumber>
-          <EnabledFlag>1</EnabledFlag>
-          <Address>83604</Address>
-          <ByteObject>0</ByteObject>
-          <HtxType>0</HtxType>
-          <ManyObjects>0</ManyObjects>
-          <SizeOfObject>0</SizeOfObject>
-          <BreakByAccess>0</BreakByAccess>
-          <BreakIfRCount>1</BreakIfRCount>
-          <Filename>..\source\Module\DebugCmd\DebugCmd.c</Filename>
-          <ExecCommand></ExecCommand>
-          <Expression>\\GateWay\../source/Module/DebugCmd/DebugCmd.c\1598</Expression>
-        </Bp>
-        <Bp>
-          <Number>1</Number>
-          <Type>0</Type>
-          <LineNumber>460</LineNumber>
-          <EnabledFlag>1</EnabledFlag>
-          <Address>59254</Address>
-          <ByteObject>0</ByteObject>
-          <HtxType>0</HtxType>
-          <ManyObjects>0</ManyObjects>
-          <SizeOfObject>0</SizeOfObject>
-          <BreakByAccess>0</BreakByAccess>
-          <BreakIfRCount>1</BreakIfRCount>
-          <Filename>..\source\User\Src\Public.c</Filename>
-          <ExecCommand></ExecCommand>
-          <Expression>\\GateWay\../source/User/Src/Public.c\460</Expression>
-        </Bp>
-        <Bp>
-          <Number>2</Number>
-          <Type>0</Type>
-          <LineNumber>466</LineNumber>
-          <EnabledFlag>1</EnabledFlag>
-          <Address>59314</Address>
-          <ByteObject>0</ByteObject>
-          <HtxType>0</HtxType>
-          <ManyObjects>0</ManyObjects>
-          <SizeOfObject>0</SizeOfObject>
-          <BreakByAccess>0</BreakByAccess>
-          <BreakIfRCount>1</BreakIfRCount>
-          <Filename>..\source\User\Src\Public.c</Filename>
-          <ExecCommand></ExecCommand>
-          <Expression>\\GateWay\../source/User/Src/Public.c\466</Expression>
-        </Bp>
-        <Bp>
-          <Number>3</Number>
-          <Type>0</Type>
-          <LineNumber>416</LineNumber>
-          <EnabledFlag>1</EnabledFlag>
-          <Address>109936</Address>
-          <ByteObject>0</ByteObject>
-          <HtxType>0</HtxType>
-          <ManyObjects>0</ManyObjects>
-          <SizeOfObject>0</SizeOfObject>
-          <BreakByAccess>0</BreakByAccess>
-          <BreakIfRCount>1</BreakIfRCount>
-          <Filename>..\source\Module\SX127x\sx127x.c</Filename>
-          <ExecCommand></ExecCommand>
-          <Expression>\\GateWay\../source/Module/SX127x/sx127x.c\416</Expression>
-        </Bp>
-        <Bp>
-          <Number>4</Number>
-          <Type>0</Type>
-          <LineNumber>415</LineNumber>
-          <EnabledFlag>1</EnabledFlag>
-          <Address>109924</Address>
-          <ByteObject>0</ByteObject>
-          <HtxType>0</HtxType>
-          <ManyObjects>0</ManyObjects>
-          <SizeOfObject>0</SizeOfObject>
-          <BreakByAccess>0</BreakByAccess>
-          <BreakIfRCount>1</BreakIfRCount>
-          <Filename>..\source\Module\SX127x\sx127x.c</Filename>
-          <ExecCommand></ExecCommand>
-          <Expression>\\GateWay\../source/Module/SX127x/sx127x.c\415</Expression>
-        </Bp>
-      </Breakpoint>
       <WatchWindow1>
         <Ww>
           <count>0</count>
           <WinNumber>1</WinNumber>
-          <ItemText>GateWay,0x0A</ItemText>
+          <ItemText>GateWay,0x10</ItemText>
         </Ww>
       </WatchWindow1>
       <WatchWindow2>
@@ -977,7 +896,7 @@
   </Group>
 
   <Group>
-    <GroupName>DebugCmd</GroupName>
+    <GroupName>GateWay_Debug</GroupName>
     <tvExp>1</tvExp>
     <tvExpOptDlg>0</tvExpOptDlg>
     <cbSel>0</cbSel>
@@ -989,7 +908,7 @@
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
       <bDave2>0</bDave2>
-      <PathWithFileName>..\source\Module\DebugCmd\DebugCmd.c</PathWithFileName>
+      <PathWithFileName>..\source\Module\GateWay_Debug\DebugCmd.c</PathWithFileName>
       <FilenameWithoutPath>DebugCmd.c</FilenameWithoutPath>
       <RteFlg>0</RteFlg>
       <bShared>0</bShared>

Project/GateWay/MDK/GateWay.uvprojx

@@ -341,7 +341,7 @@
               <MiscControls>--diag_suppress=186,66</MiscControls>
               <Define>__DEBUG,HC32F460,USE_DEVICE_DRIVER_LIB,JEUA</Define>
               <Undefine></Undefine>
-              <IncludePath>..\..\..\driver\inc;..\..\..\mcu\common;..\source\User\Inc;..\source\Module\Debug;..\source\Module\SDCard;..\source\Module\FatFS\source;..\source\Module\SX127x</IncludePath>
+              <IncludePath>..\..\..\driver\inc;..\..\..\mcu\common;..\source\User\Inc;..\source\Module\GateWay_Debug;..\source\Module\SDCard;..\source\Module\FatFS\source;..\source\Module\SX127x</IncludePath>
             </VariousControls>
           </Cads>
           <Aads>
@@ -586,12 +586,12 @@
           </Files>
         </Group>
         <Group>
-          <GroupName>DebugCmd</GroupName>
+          <GroupName>GateWay_Debug</GroupName>
           <Files>
             <File>
               <FileName>DebugCmd.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\source\Module\DebugCmd\DebugCmd.c</FilePath>
+              <FilePath>..\source\Module\GateWay_Debug\DebugCmd.c</FilePath>
             </File>
           </Files>
         </Group>
@@ -1267,7 +1267,7 @@
               <MiscControls>--diag_suppress=186,66</MiscControls>
               <Define>__DEBUG,HC32F460,USE_DEVICE_DRIVER_LIB,JEUA,BOOT_ENABLE</Define>
               <Undefine></Undefine>
-              <IncludePath>..\..\..\driver\inc;..\..\..\mcu\common;..\source\User\Inc;..\source\Module\Debug;..\source\Module\SDCard;..\source\Module\FatFS\source;..\source\Module\sx127x;..\source\Module\DebugCmd</IncludePath>
+              <IncludePath>..\..\..\driver\inc;..\..\..\mcu\common;..\source\User\Inc;..\source\Module\Debug;..\source\Module\SDCard;..\source\Module\FatFS\source;..\source\Module\sx127x;..\source\Module\GateWay_Debug</IncludePath>
             </VariousControls>
           </Cads>
           <Aads>
@@ -1512,12 +1512,12 @@
           </Files>
         </Group>
         <Group>
-          <GroupName>DebugCmd</GroupName>
+          <GroupName>GateWay_Debug</GroupName>
           <Files>
             <File>
               <FileName>DebugCmd.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\source\Module\DebugCmd\DebugCmd.c</FilePath>
+              <FilePath>..\source\Module\GateWay_Debug\DebugCmd.c</FilePath>
             </File>
           </Files>
         </Group>

Project/GateWay/MDK/RTE/_app_app/RTE_Components.h

@@ -0,0 +1,21 @@
+
+/*
+ * Auto generated Run-Time-Environment Configuration File
+ *      *** Do not modify ! ***
+ *
+ * Project: 'GateWay' 
+ * Target:  'app_app' 
+ */
+
+#ifndef RTE_COMPONENTS_H
+#define RTE_COMPONENTS_H
+
+
+/*
+ * Define the Device Header File: 
+ */
+#define CMSIS_device_header "HC32F460KETA.h"
+
+
+
+#endif /* RTE_COMPONENTS_H */

Project/GateWay/source/User/Inc/Public.h

@@ -191,6 +191,11 @@ typedef struct {
 	uint8_t ERTime;						//紧急上报时长
 }__attribute__((packed))CommUnitPara_t, *CommUnitPara;
 
+typedef struct {
+	bool ExclFlag;
+	uint8_t ExclMac[6];//需要排除的通讯单元MAC
+}__attribute__((packed))ExclCommUnit_t, *ExclCommUnit;
+
 typedef struct {
 	uint8_t Data[SENSOR_NUM_MAX][SENSOR_DATA_LEN_MAX];
 }__attribute__((packed))CommUnitData_t, *CommUnitData;
@@ -251,6 +256,7 @@ typedef struct {
 	uint32_t SvrPort;									//服务器端口
 	uint32_t CommUnitReadInterval;				//通讯单元读取时间间隔,单位S
 	CommUnitPara_t CommUnitArray[COMMUNIT_NUM_MAX];			//注册的通讯单元信息
+	ExclCommUnit_t ExclCommUnit[COMMUNIT_NUM_MAX];			//排除的通讯单元信息
 	RS485Para_t Rs485Ch1;							//RS485通道1配置
 	RS485Para_t Rs485Ch2;							//RS485通道2配置
 	uint8_t DebugChannel;							//调试通道
@@ -286,6 +292,7 @@ int CommUnitAnalyze(GateWayPara GateWay, uint8_t *rData, uint16_t rLen, SendData
 void DebugAnalyze(GateWayPara GateWay, uint8_t *rData, uint16_t rLen);
 void CommUnitCmdSend(GateWayPara GateWay, uint8_t *CommUnitMac, CommUnitCmd_m Cmd, uint8_t *Payload, uint16_t PayloadLen, SendData Send);
 int CheckCommUnitReg(GateWayPara GateWay, uint8_t *CommUnitMac);
+int CheckCommUnitExcl(GateWayPara GateWay, uint8_t *CommUnitMac);
 int CommUintOrgData(GateWayPara GateWay, CommUnitPara CUPara, CommUnitData CUData, uint8_t *sData);
 void DebugDisplaySensorData(int SensorIdx, uint16_t SensorType, uint8_t *SensorData);
 #endif

Project/GateWay/source/User/Src/LoraTask.c

@@ -66,7 +66,7 @@ void LoraIRQ_Thread_Entry(void *parameter)
 
 static void LoRaSendBuffer(uint8_t* pucBuff, uint16_t ucLen)
 {
-	if(GateWay->ConfigPara.Lora.OnOff)
+	if(GateWay->ConfigPara.Lora.OnOff == true)
 		Sx1276LoRaSendBuffer(pucBuff, ucLen);
 }
 

Project/GateWay/source/User/Src/Public.c

@@ -184,7 +184,7 @@ int NetCommOrgData(GateWayPara GateWay, uint8_t *MegData, uint8_t *OutData)
 * 功能描述: 检查设备是否注册
 * 参    数: GateWay,网关句柄
             CommUnitMac, 待检查的设备MAC
-* 返 回 值: 已注册返回true,没注册返回false
+* 返 回 值: 已注册返回非0,没注册返回-1
 *****************************************************************************************/
 int CheckCommUnitReg(GateWayPara GateWay, uint8_t *CommUnitMac)
 {
@@ -196,8 +196,23 @@ int CheckCommUnitReg(GateWayPara GateWay, uint8_t *CommUnitMac)
 	}
 	return -1;
 }
-
+/*****************************************************************************************
-
+* 函数名称: CheckCommUnitExcl
+* 功能描述: 检查设备是否排除
+* 参    数: GateWay,网关句柄
+            CommUnitMac, 待检查的设备MAC
+* 返 回 值: 已排除返回非0,没排除返回-1
+*****************************************************************************************/
+int CheckCommUnitExcl(GateWayPara GateWay, uint8_t *CommUnitMac)
+{
+	for(int i = 0; i < COMMUNIT_NUM_MAX; i++) {//判断是否被排除
+		if(memcmp(GateWay->ConfigPara.ExclCommUnit[i].ExclMac, CommUnitMac, 6) == 0) {
+			if(GateWay->ConfigPara.ExclCommUnit[i].ExclFlag == true)
+				return i;
+		}
+	}
+	return -1;
+}
 /*****************************************************************************************
 * 函数名称: CommUnitSendCmd
 * 功能描述: 网关下发通讯单元指令函数
@@ -445,7 +460,7 @@ void DebugDisplaySensorData(int SensorIdx, uint16_t SensorType, uint8_t *SensorD
 int CommUnitAnalyze(GateWayPara GateWay, uint8_t *rData, uint16_t rLen, SendData Response)
 {
 	uint16_t check, crc16;
-	int CommUnitIdx;
+	int CommUnitIdx, ExclCommUnit;
 	uint16_t PayLoadLen;
 	uint8_t *PayLoad;
 	uint8_t *MegData;
@@ -468,11 +483,16 @@ int CommUnitAnalyze(GateWayPara GateWay, uint8_t *rData, uint16_t rLen, SendData
 	if((CUHeader->Cmd != COMM_UNIT_CMD_REG) && (memcmp(GateWay->ConfigPara.GwMac, CUHeader->GWMac, 6) != 0))
 		return -1;
 	
-	CommUnitIdx = CheckCommUnitReg(GateWay, CUHeader->DevMac);
+	CommUnitIdx = CheckCommUnitReg(GateWay, CUHeader->DevMac);//判断是否是已注册的设备
 	if(CommUnitIdx < 0) {
-		if(CUHeader->Cmd != COMM_UNIT_CMD_REG)
+		if(CUHeader->Cmd != COMM_UNIT_CMD_REG){//判断是否是注册请求
 			return -1;
     }
+    ExclCommUnit = CheckCommUnitExcl(GateWay, CUHeader->DevMac);//判断是否是被排除的设备
+    if(ExclCommUnit > -1) {
+      return -1;
+    }
+	}
   
 	switch(CUHeader->Cmd) {
 		case COMM_UNIT_CMD_REG:{

Project/GateWay/source/User/Src/main.c

@@ -134,12 +134,11 @@ void GateWayInit(void)
 		memset((uint8_t *)&GateWay.ConfigPara, 0x00, sizeof(GWConfigPara_t));
 		GateWay.ConfigPara.SavFlag = LOG_SAV_FLAG;
 		GateWay.ConfigPara.Comm = CATONE_COMM;
-//		memcpy(GateWay.ConfigPara.GwMac, GateWayMac, 6);
+		GateWay.ConfigPara.SvrAddr[0] = 103;
-		GateWay.ConfigPara.SvrAddr[0] = 8;
+		GateWay.ConfigPara.SvrAddr[1] = 217;
-		GateWay.ConfigPara.SvrAddr[1] = 137;
+		GateWay.ConfigPara.SvrAddr[2] = 192;
-		GateWay.ConfigPara.SvrAddr[2] = 104;
+		GateWay.ConfigPara.SvrAddr[3] = 248;
-		GateWay.ConfigPara.SvrAddr[3] = 4;
+		GateWay.ConfigPara.SvrPort = 12111;
-		GateWay.ConfigPara.SvrPort = 8007;
 		GateWay.ConfigPara.CommUnitReadInterval = COMMUNIT_READ_SENSOR_INTERVAL_MAX;//非低功耗设备
 		memset(GateWay.ConfigPara.CommUnitArray, 0x00, sizeof(CommUnitData_t) * COMMUNIT_NUM_MAX);
 		GateWay.ConfigPara.Rs485Ch1.Enable = true;
@@ -151,39 +150,10 @@ void GateWayInit(void)
 		GateWay.ConfigPara.Rs485Ch2.BaudRate = 500000;
 		GateWay.ConfigPara.Rs485Ch2.UpgradeEnable = false;
 		GateWay.ConfigPara.Rs485Ch2.CommUnitEnable = false;
-		GateWay.ConfigPara.Rs485Ch2.Power = true;
+		GateWay.ConfigPara.Rs485Ch2.Power = false;
-		
-		GateWay.ConfigPara.Lora.OnOff = true;
-		GateWay.ConfigPara.Lora.ucChannel = 8;
-		GateWay.ConfigPara.Lora.ucPower = 20;
-		GateWay.ConfigPara.Lora.SignalBw = 8;
-		GateWay.ConfigPara.Lora.SpreadFactor = 9;
-		GateWay.ConfigPara.Lora.ErrorCoding = 2;
-		GateWay.ConfigPara.Lora.RegPreamble = 10;
-		GateWay.ConfigPara.Lora.FreqCent = FREQ_CENT;
-		GateWay.ConfigPara.OutageFlag = false;
-		GateWay.ConfigPara.DebugChannel = DEBUG_CH_RS485_1;
-	}
-	
-	if(GateWay.ConfigPara.OutageFlag != true && GateWay.ConfigPara.OutageFlag != false)
-		GateWay.ConfigPara.OutageFlag = false;
-	
-	GateWay.SvrRegFlag = false;
-	memset(GateWay.SvrMac, 0x00, 6);
 		GateWay.ConfigPara.Rs485Ch1.RS485Send = RS485Ch1UartSend;
 		GateWay.ConfigPara.Rs485Ch2.RS485Send = RS485Ch2UartSend;
 		
-	GateWay.ConfigPara.Rs485Ch1.Enable = true;
-	GateWay.ConfigPara.Rs485Ch1.CommUnitEnable = false;
-	GateWay.ConfigPara.Rs485Ch1.UpgradeEnable = true;
-	GateWay.ConfigPara.Rs485Ch1.BaudRate = 500000;
-	GateWay.ConfigPara.Rs485Ch1.Power = false;
-	GateWay.ConfigPara.Rs485Ch2.Enable = true;
-	GateWay.ConfigPara.Rs485Ch2.BaudRate = 500000;
-	GateWay.ConfigPara.Rs485Ch2.CommUnitEnable = false;
-	GateWay.ConfigPara.Rs485Ch2.UpgradeEnable = false;
-	GateWay.ConfigPara.Rs485Ch2.Power = false;
-
 		GateWay.ConfigPara.Lora.OnOff = true;
 		GateWay.ConfigPara.Lora.ucChannel = 8;
 		GateWay.ConfigPara.Lora.ucPower = 20;
@@ -193,6 +163,9 @@ void GateWayInit(void)
 		GateWay.ConfigPara.Lora.RegPreamble = 10;
 		GateWay.ConfigPara.Lora.FreqCent = FREQ_CENT;
 		
+		GateWay.ConfigPara.OutageFlag = false;
+		GateWay.ConfigPara.DebugChannel = DEBUG_CH_RS485_1;
+		
 #if MAC_ADDR_TYPE == 0
 	memcpy(GateWay.ConfigPara.GwMac, GateWayMac_Test, 6);
 	GateWay.ConfigPara.DebugChannel = DEBUG_CH_DBG;
@@ -248,6 +221,13 @@ void GateWayInit(void)
 	GateWay.ConfigPara.SvrAddr[3] = 248;
 	GateWay.ConfigPara.SvrPort = 12111;
 #endif
+	}
+	
+	if(GateWay.ConfigPara.OutageFlag != true && GateWay.ConfigPara.OutageFlag != false)
+		GateWay.ConfigPara.OutageFlag = false;
+	
+	GateWay.SvrRegFlag = false;
+	memset(GateWay.SvrMac, 0x00, 6);
 	
 	if(GateWay.ConfigPara.DebugChannel == DEBUG_CH_RS485_1) {
 		GateWay.ConfigPara.Rs485Ch1.Enable = true;
@@ -289,6 +269,11 @@ void GateWayInit(void)
 		LoraSetChannel(GateWay.ConfigPara.Lora.ucChannel);
 		//WritePara((uint8_t *)&GateWay.ConfigPara, sizeof(GWConfigPara_t));
 	}
+	if(LoraSetFreqCent(GateWay.ConfigPara.Lora.FreqCent) == false)
+	{
+		GateWay.ConfigPara.Lora.FreqCent = 433100000;
+		LoraSetFreqCent(GateWay.ConfigPara.Lora.ucChannel);
+	}
 	if(LoraSetPower(GateWay.ConfigPara.Lora.ucPower) == false) {
 		GateWay.ConfigPara.Lora.ucPower = 20;
 		LoraSetPower(GateWay.ConfigPara.Lora.ucPower);
@@ -311,9 +296,9 @@ void GateWayInit(void)
 	}
 	if(GateWay.ConfigPara.Lora.RegPreamble > 0xFE) {
 		GateWay.ConfigPara.Lora.RegPreamble = 10;
+		LoraSetRegPreamble(GateWay.ConfigPara.Lora.RegPreamble);
 		//WritePara((uint8_t *)&GateWay.ConfigPara, sizeof(GWConfigPara_t));
 	}
-	LoraSetRegPreamble(GateWay.ConfigPara.Lora.RegPreamble);
 	
 	WritePara((uint8_t *)&GateWay.ConfigPara, sizeof(GWConfigPara_t));