diff --git a/.gitmodules b/.gitmodules new file mode 100644 index 0000000..1e58861 --- /dev/null +++ b/.gitmodules @@ -0,0 +1,3 @@ +[submodule "Project/GateWay/source/Module/DebugCmd"] + path = Project/GateWay/source/Module/DebugCmd + url = http://192.168.2.47:8418/YuanHongbin/HC32F460_DebugCmd.git diff --git a/Project/GateWay/MDK/GateWay.uvoptx b/Project/GateWay/MDK/GateWay.uvoptx index c9b58bf..4243e47 100644 --- a/Project/GateWay/MDK/GateWay.uvoptx +++ b/Project/GateWay/MDK/GateWay.uvoptx @@ -658,18 +658,6 @@ 0 0 0 - ..\source\User\Src\DebugCmd.c - DebugCmd.c - 0 - 0 - - - 2 - 10 - 1 - 0 - 0 - 0 ..\source\User\Src\spiflash.c spiflash.c 0 @@ -677,7 +665,7 @@ 2 - 11 + 10 1 0 0 @@ -689,7 +677,7 @@ 2 - 12 + 11 1 0 0 @@ -701,7 +689,7 @@ 2 - 13 + 12 1 0 0 @@ -713,7 +701,7 @@ 2 - 14 + 13 1 0 0 @@ -733,7 +721,7 @@ 0 3 - 15 + 14 1 0 0 @@ -745,7 +733,7 @@ 3 - 16 + 15 1 0 0 @@ -757,7 +745,7 @@ 3 - 17 + 16 1 0 0 @@ -769,7 +757,7 @@ 3 - 18 + 17 1 0 0 @@ -781,7 +769,7 @@ 3 - 19 + 18 1 0 0 @@ -793,7 +781,7 @@ 3 - 20 + 19 1 0 0 @@ -805,7 +793,7 @@ 3 - 21 + 20 1 0 0 @@ -817,7 +805,7 @@ 3 - 22 + 21 1 0 0 @@ -829,7 +817,7 @@ 3 - 23 + 22 1 0 0 @@ -841,7 +829,7 @@ 3 - 24 + 23 1 0 0 @@ -853,7 +841,7 @@ 3 - 25 + 24 1 0 0 @@ -865,7 +853,7 @@ 3 - 26 + 25 1 0 0 @@ -877,7 +865,7 @@ 3 - 27 + 26 1 0 0 @@ -889,7 +877,7 @@ 3 - 28 + 27 1 0 0 @@ -901,7 +889,7 @@ 3 - 29 + 28 1 0 0 @@ -913,7 +901,7 @@ 3 - 30 + 29 1 0 0 @@ -925,7 +913,7 @@ 3 - 31 + 30 1 0 0 @@ -937,6 +925,26 @@ + + DebugCmd + 1 + 0 + 0 + 0 + + 4 + 31 + 1 + 0 + 0 + 0 + ..\source\Module\DebugCmd\DebugCmd.c + DebugCmd.c + 0 + 0 + + + Debug 0 @@ -944,7 +952,7 @@ 0 0 - 4 + 5 32 1 0 @@ -964,7 +972,7 @@ 0 0 - 5 + 6 33 1 0 @@ -976,7 +984,7 @@ 0 - 5 + 6 34 1 0 @@ -996,7 +1004,7 @@ 0 0 - 6 + 7 35 1 0 @@ -1008,7 +1016,7 @@ 0 - 6 + 7 36 1 0 @@ -1020,7 +1028,7 @@ 0 - 6 + 7 37 1 0 @@ -1032,7 +1040,7 @@ 0 - 6 + 7 38 1 0 @@ -1052,7 +1060,7 @@ 0 0 - 7 + 8 39 1 0 diff --git a/Project/GateWay/MDK/GateWay.uvprojx b/Project/GateWay/MDK/GateWay.uvprojx index f5d6c7d..3291f4d 100644 --- a/Project/GateWay/MDK/GateWay.uvprojx +++ b/Project/GateWay/MDK/GateWay.uvprojx @@ -468,11 +468,6 @@ 1 ..\source\User\Src\Public.c - - DebugCmd.c - 1 - ..\source\User\Src\DebugCmd.c - spiflash.c 1 @@ -590,6 +585,16 @@ + + DebugCmd + + + DebugCmd.c + 1 + ..\source\Module\DebugCmd\DebugCmd.c + + + Debug @@ -1392,7 +1397,7 @@ --diag_suppress=186,66 __DEBUG,HC32F460,USE_DEVICE_DRIVER_LIB,JEUA,BOOT_ENABLE - ..\..\..\driver\inc;..\..\..\mcu\common;..\source\User\Inc;..\source\Module\Debug;..\source\Module\SDCard;..\source\Module\FatFS\source;..\source\Module\SX127x + ..\..\..\driver\inc;..\..\..\mcu\common;..\source\User\Inc;..\source\Module\Debug;..\source\Module\SDCard;..\source\Module\FatFS\source;..\source\Module\SX127x;..\source\Module\DebugCmd @@ -1519,11 +1524,6 @@ 1 ..\source\User\Src\Public.c - - DebugCmd.c - 1 - ..\source\User\Src\DebugCmd.c - spiflash.c 1 @@ -1641,6 +1641,16 @@ + + DebugCmd + + + DebugCmd.c + 1 + ..\source\Module\DebugCmd\DebugCmd.c + + + Debug diff --git a/Project/GateWay/source/Module/DebugCmd b/Project/GateWay/source/Module/DebugCmd new file mode 160000 index 0000000..ce77d9e --- /dev/null +++ b/Project/GateWay/source/Module/DebugCmd @@ -0,0 +1 @@ +Subproject commit ce77d9eaf6375503e2dab7d4b60a38e9072bb45a diff --git a/Project/GateWay/source/User/Inc/DebugCmd.h b/Project/GateWay/source/User/Inc/DebugCmd.h deleted file mode 100644 index 1dd66bd..0000000 --- a/Project/GateWay/source/User/Inc/DebugCmd.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __DEBUG_CMD_H -#define __DEBUG_CMD_H - -void Debug_Thread_Entry(void *parameter); -void DebugRxOverhandler(void); -void Debug_Printf(char *format, ...); -#endif diff --git a/Project/GateWay/source/User/Src/DebugCmd.c b/Project/GateWay/source/User/Src/DebugCmd.c deleted file mode 100644 index 39da31c..0000000 --- a/Project/GateWay/source/User/Src/DebugCmd.c +++ /dev/null @@ -1,1686 +0,0 @@ -#include "main.h" -#include "CatOneTask.h" -#include "RS485Task.h" -#include "Public.h" -#include -#include "spiflash.h" -#include "LoraTask.h" - -#define DBG_RX_LEN_MAX 128 -//#define DBG_LOG(...) rt_kprintf(__VA_ARGS__) -#define DEBUG_CMD_CNT 22 -#define DEBUG_BUFF_SIZE_MAX 512 - -#define DEBUG_BUFSIZE 200 -#define DEBUG_BUFF_MAX 1024 - -void Debug_Printf(char *format, ...); - -#define DBG_LOG(...) Debug_Printf(__VA_ARGS__) - -typedef void (*DebugExec)(int argc, char *argv[]); - -typedef struct{ - char *DBGCmd; - DebugExec DBGExec; -}DBGFunType; - -const DBGFunType DebugFun[DEBUG_CMD_CNT]; - -static GateWayPara GateWay; -static char buff[DBG_RX_LEN_MAX]; -static uint8_t DebugRxLen; -static uint8_t DebugRxBuff[DBG_RX_LEN_MAX]; -static uint8_t DebugRxTimeOut1mSCnt; -static rt_sem_t DebugRev_Sem; -static uint16_t ir=0; /* buffer read index*/ -static char tempBuff[DEBUG_BUFF_MAX]; - -void vcom_Print(uint8_t sLen) -{ - char* CurChar; - ir = 0; - while(ir < sLen) - { - CurChar = &buff[ir++]; - if(GateWay->ConfigPara.DebugChannel == DEBUG_CH_RS485_1) - RS485Ch1UartSend((uint8_t*)CurChar, 1); - else if(GateWay->ConfigPara.DebugChannel == DEBUG_CH_RS485_2) - RS485Ch2UartSend((uint8_t*)CurChar, 1); - } -} - -/***************************************************************************************** -* 函数名称: Debug_Printf -* 功能描述: RS485通道1任务函数 -* 参 数: 任务参数入口 -* 返 回 值: 无 -*****************************************************************************************/ -void Debug_Printf(char *format, ...) -{ - va_list args; - va_start(args, format); - uint16_t len; - //uint32_t primask_bit; - uint16_t offset = 0; - //primask_bit = __get_PRIMASK(); - //__disable_irq(); - - /*convert into string at buff[0] of length iw*/ - len = vsprintf(&tempBuff[0], format, args); - if(GateWay->ConfigPara.DebugChannel == DEBUG_CH_DBG) { - rt_kprintf(tempBuff); - } - else { - while(offset < len) { - if((len - offset) < DEBUG_BUFSIZE) { - memcpy(&buff[0], &tempBuff[offset], len - offset); - vcom_Print(len - offset); - offset = len; - } - else { - memcpy(&buff[0], &tempBuff[offset], DEBUG_BUFSIZE); - offset += DEBUG_BUFSIZE; - vcom_Print(DEBUG_BUFSIZE); - } - } - } - //__set_PRIMASK(primask_bit); - //__enable_irq(); - - va_end(args); -} -/***************************************************************************************** -* 函数名称: RS485Ch2_Thread_Entry -* 功能描述: RS485通道1任务函数 -* 参 数: 任务参数入口 -* 返 回 值: 无 -*****************************************************************************************/ -void Debug_Thread_Entry(void *parameter) -{ - GateWay = (GateWayPara)parameter; - rt_err_t result; - - DebugRev_Sem = rt_sem_create("debug_sem", 0, RT_IPC_FLAG_FIFO); - if(DebugRev_Sem == RT_NULL) { - rt_kprintf("DebugRev Sem Create Failed!\r\n"); - } - rt_kprintf("DebugRev Thread is running！\r\n"); - - while(1) { - result = rt_sem_take(DebugRev_Sem, RT_WAITING_FOREVER); - if(result == RT_EOK) { - DebugAnalyze(GateWay, DebugRxBuff, DebugRxLen); - DebugRxTimeOut1mSCnt = 0; - DebugRxLen = 0; - } - } -} - -/***************************************************************************************** -* 函数名称: RS485Ch2RxIrqCallback -* 功能描述: RS485通道1中断处理回调函数 -* 参 数: rData 接收到的数据 -* 返 回 值: 无 -*****************************************************************************************/ -void DbgRxIrqCallback(uint8_t rData) -{ - if(DebugRxTimeOut1mSCnt == 0) - DebugRxLen = 0; - - DebugRxTimeOut1mSCnt = 3; - if(DebugRxLen < DBG_RX_LEN_MAX) { - DebugRxBuff[DebugRxLen++] = rData; - } -} - - -void DebugRxOverhandler(void) -{ - if(DebugRxTimeOut1mSCnt > 0) - DebugRxTimeOut1mSCnt--; - - if(DebugRxLen > 2 && DebugRxTimeOut1mSCnt == 0) { - DebugRxTimeOut1mSCnt = 20; - rt_sem_release(DebugRev_Sem); - } -} - -/***************************************************************************************** -* 函数名称: DebugAnalyze -* 功能描述: 调试指令解析 -* 参 数: GateWay, 网关参数句柄 - rData,输入数据 - rLen, 输入数据长度 -* 返 回 值: 无 -*****************************************************************************************/ -void DebugAnalyze(GateWayPara GateWay, uint8_t *rData, uint16_t rLen) -{ - int argc = 0; - char *argv[10], *argp; - - for(int i = 0; i < 10; i++) { - argv[i] = 0; - } - if(rLen == 0) - return; - //for(argv[argc] = strtok(RxBuff, " "); argv[argc] != NULL; argv[++argc] = strtok(NULL, " ")); - argp = strtok((char *)rData, " "); - for(int i = 0; i < 10; i++) { - if(argp != NULL) { - argv[argc++] = argp; - argp = strtok(NULL, " "); - } - else if(argc > 0){ - argc--; - break; - } - } - - argp = strtok(argv[argc], "'\r'"); - if(argp != NULL) { - argv[argc++] = argp; - } - - for(int i = 0; i < DEBUG_CMD_CNT; i++) { - if(strcmp(argv[0], DebugFun[i].DBGCmd) == 0) - DebugFun[i].DBGExec(argc, argv); - } - memset(rData, 0x00, rLen); -} - -/***************************************************************************************** -* 函数名称: DebugCmdMainOnOff -* 功能描述: 主调试信息开关 -* 参 数: argc, 输入参数数量 - argv, 输入参数 -* 返 回 值: 无 -*****************************************************************************************/ -void DebugCmdMainOnOff(int argc, char *argv[]) -{ - DBG_LOG("\r\n"); - if(argc < 2) - return; - - if(strcmp(argv[1], "?") == 0) { - DBG_LOG("Debug Cmd: main arg1\r\n"); - DBG_LOG(" brief --> Turn the Main_DBG on or off.\r\n"); - DBG_LOG(" arg1 --> on/off\r\n\r\n"); - return; - } - - if(strcmp(argv[1], "on") == 0) { - MainDBGOnOff(true); - } - else if(strcmp(argv[1], "off") == 0) { - MainDBGOnOff(false); - } -} - -/***************************************************************************************** -* 函数名称: DebugCmdCat1OnOff -* 功能描述: CAT1调试信息开关 -* 参 数: argc, 输入参数数量 - argv, 输入参数 -* 返 回 值: 无 -*****************************************************************************************/ -void DebugCmdCat1OnOff(int argc, char *argv[]) -{ - DBG_LOG("\r\n"); - if(argc < 2) - return; - - if(strcmp(argv[1], "?") == 0) { - DBG_LOG("Debug Cmd: cat1 arg1\r\n"); - DBG_LOG(" brief --> Turn the Cat1_DBG on or off.\r\n"); - DBG_LOG(" arg1 --> on/off\r\n\r\n"); - return; - } - - if(strcmp(argv[1], "on") == 0) { - Cat1DBGOnOff(true); - } - else if(strcmp(argv[1], "off") == 0) { - Cat1DBGOnOff(false); - } -} - -/***************************************************************************************** -* 函数名称: DebugCmdCat1OnOff -* 功能描述: CAT1调试信息开关 -* 参 数: argc, 输入参数数量 - argv, 输入参数 -* 返 回 值: 无 -*****************************************************************************************/ -void DebugCmdRS485Ctrl(int argc, char *argv[]) -{ - DBG_LOG("\r\n"); - if(argc < 2) - return; - - if(strcmp(argv[1], "?") == 0) { - DBG_LOG("Debug Cmd: rs485 arg1 arg2 arg3 arg4\r\n"); - DBG_LOG(" brief --> RS485 control command.\r\n"); - DBG_LOG(" arg1 --> idx: (1, 2) RS485 channel selection.\r\n"); - DBG_LOG(" arg2 --> scmd:(o, c, v, b)Rs485 subcommand.\r\n"); - DBG_LOG(" scmd = o, arg3 = (on, off) RS485 Channel On-OFF.\r\n"); - DBG_LOG(" scmd = c, arg3 = (on, off) Enable the internal communication unit function.\r\n"); - DBG_LOG(" scmd = v, arg3 = (on, off) Set output voltage.\r\n"); - DBG_LOG(" scmd = b, arg3 = (2400~500000) Set baud rate.\r\n\r\n"); - DBG_LOG(" scmd = u, arg4 = (on, off) Set Upgrade symbol.\r\n\r\n"); - return; - } - - int idx = atoi(argv[1]); - if(idx < 1 || idx > 2) { - DBG_LOG("RS485 Cmd Para Error!\r\n"); - return; - } - - char scmd = argv[2][0]; - switch(scmd) { - case 'o': - if(strstr(argv[3], "on") != NULL) { - if(idx == 1) - GateWay->ConfigPara.Rs485Ch1.Enable = true; - else if(idx == 2) - GateWay->ConfigPara.Rs485Ch2.Enable = true; - DBG_LOG("RS485Ch%d Enable!\r\n", idx); - } - else if(strstr(argv[3], "off") != NULL){ - if(idx == 1) - GateWay->ConfigPara.Rs485Ch1.Enable = false; - else if(idx == 2) - GateWay->ConfigPara.Rs485Ch2.Enable = false; - DBG_LOG("RS485Ch%d Disable!\r\n", idx); - } - break; - - case 'c': - if(strstr(argv[3], "on") != NULL) { - if(idx == 1) { - GateWay->ConfigPara.Rs485Ch1.CommUnitEnable = true; - GateWay->ConfigPara.Rs485Ch1.QuerySensorFlag = true; - GateWay->ConfigPara.Rs485Ch1.CUData.Para.SensorN = 0; - memset(GateWay->ConfigPara.Rs485Ch1.CUData.Para.SensorType, 0x00, SENSOR_NUM_MAX * 2); - GateWay->ConfigPara.Rs485Ch1.CUData.Para.CommStatus = true; - RS485Ch1_Config(9600); - GateWay->ConfigPara.Rs485Ch1.BaudRate = 9600; - SComm1Para.SensorCnt = 0; - } - else if(idx == 2) { - GateWay->ConfigPara.Rs485Ch2.CommUnitEnable = true; - GateWay->ConfigPara.Rs485Ch2.QuerySensorFlag = true; - GateWay->ConfigPara.Rs485Ch2.CUData.Para.SensorN = 0; - memset(GateWay->ConfigPara.Rs485Ch2.CUData.Para.SensorType, 0x00, SENSOR_NUM_MAX * 2); - GateWay->ConfigPara.Rs485Ch2.CUData.Para.CommStatus = true; - RS485Ch2_Config(9600); - GateWay->ConfigPara.Rs485Ch2.BaudRate = 9600; - SComm2Para.SensorCnt = 0; - } - DBG_LOG("RS485Ch%d Enable!\r\n", idx); - } - else if(strstr(argv[3], "off") != NULL){ - if(idx == 1) { - GateWay->ConfigPara.Rs485Ch1.CommUnitEnable = false; - GateWay->ConfigPara.Rs485Ch1.CUData.Para.CommStatus = false; - } - else if(idx == 2) { - GateWay->ConfigPara.Rs485Ch2.CommUnitEnable = false; - GateWay->ConfigPara.Rs485Ch2.CUData.Para.CommStatus = false; - } - DBG_LOG("RS485Ch%d Disable!\r\n", idx); - } - break; - - case 'v': - if(strstr(argv[3], "on") != NULL) { - if(idx == 1) { - GateWay->ConfigPara.Rs485Ch1.Power = 1; - RS485_CH1_POW_ON(); - DBG_LOG("RS485Ch%d Power On!\r\n", idx); - } - else if(idx == 2) { - GateWay->ConfigPara.Rs485Ch2.Power = 1; - RS485_CH2_POW_ON(); - DBG_LOG("RS485Ch%d Power On!\r\n", idx); - } - } - else if(strstr(argv[3], "off") != NULL) { - if(idx == 1) { - GateWay->ConfigPara.Rs485Ch1.Power = 0; - RS485_CH1_POW_OFF(); - DBG_LOG("RS485Ch%d Power Off!\r\n", idx); - } - else if(idx == 2) { - GateWay->ConfigPara.Rs485Ch2.Power = 0; - RS485_CH2_POW_OFF(); - DBG_LOG("RS485Ch%d Power Off!\r\n", idx); - } - } - break; - - case 'b': { - int BaudRate = atoi(argv[3]); - if(idx == 1) { - GateWay->ConfigPara.Rs485Ch1.BaudRate = BaudRate; - RS485Ch1_Config(BaudRate); - DBG_LOG("RS485Ch%d Set BaudRate %d!\r\n", idx, GateWay->ConfigPara.Rs485Ch1.BaudRate); - } - else if(idx == 2) { - GateWay->ConfigPara.Rs485Ch2.BaudRate = BaudRate; - RS485Ch2_Config(BaudRate); - DBG_LOG("RS485Ch%d Set BaudRate %d!\r\n", idx, GateWay->ConfigPara.Rs485Ch2.BaudRate); - } - } - break; - - case 'u': - if(strstr(argv[3], "on") != NULL) { - if(idx == 1) { - GateWay->ConfigPara.Rs485Ch1.UpgradeEnable = true; - DBG_LOG("RS485Ch%d Upgrade On!\r\n", idx); - } - else if(idx == 2) { - GateWay->ConfigPara.Rs485Ch2.UpgradeEnable = true; - DBG_LOG("RS485Ch%d Upgrade On!\r\n", idx); - } - } - else if(strstr(argv[3], "off") != NULL){ - if(idx == 1) { - GateWay->ConfigPara.Rs485Ch2.UpgradeEnable = false; - DBG_LOG("RS485Ch%d Upgrade Off!\r\n", idx); - } - else if(idx == 2) { - GateWay->ConfigPara.Rs485Ch2.UpgradeEnable = false; - DBG_LOG("RS485Ch%d Upgrade Off!\r\n", idx); - } - } - break; - - default: - DBG_LOG("RS485 Cmd Para Error!\r\n"); - return; - } - WritePara((uint8_t *)&GateWay->ConfigPara, sizeof(GWConfigPara_t)); -} - -/***************************************************************************************** -* 函数名称: DebugCmdDelCommUnit -* 功能描述: 删除已注册的通讯单元 -* 参 数: argc, 输入参数数量 - argv, 输入参数 -* 返 回 值: 无 -*****************************************************************************************/ -void DebugCmdDelCommUnit(int argc, char *argv[]) -{ - DBG_LOG("\r\n"); - uint8_t mac[6]; - - if(argc < 2) - return; - - if(strcmp(argv[1], "?") == 0) { - DBG_LOG("Debug Cmd: cudel arg1\r\n"); - DBG_LOG(" brief --> Delete communication unit.\r\n"); - DBG_LOG(" arg1 --> mac: communication unit Mac address.\r\n"); - DBG_LOG(" mac = (XX-XX-XX-XX-XX-XX), Delete specified MAC communication unit.\r\n"); - DBG_LOG(" mac = (all), Delete all communication units.\r\n\r\n"); - return; - } - - if(strcmp(argv[1], "all") == 0) { - for(uint8_t i = 0; i < COMMUNIT_NUM_MAX; i++) - { - GateWay->ConfigPara.CommUnitArray[i].RegFlag = false; - } - DBG_LOG("All devices have been deleted!\r\n"); - WritePara((uint8_t *)&GateWay->ConfigPara, sizeof(GWConfigPara_t)); - return; - } - - int ret = sscanf(argv[1], "%x-%x-%x-%x-%x-%x", - (int *)&mac[0], (int *)&mac[1], (int *)&mac[2], (int *)&mac[3], (int *)&mac[4], (int *)&mac[5]); - if(ret != 6) { - DBG_LOG("cudel Cmd Para Error!\r\n"); - return; - } - - ret = CheckCommUnitReg(GateWay, mac); - if(ret < 0) { - DBG_LOG("The device is not registered with this gateway!\r\n"); - return; - } - GateWay->ConfigPara.CommUnitArray[ret].RegFlag = false; - //memset(&GateWay->ConfigPara.CommUnitArray[ret], 0x00, sizeof(CommUnitData_t)); - DBG_LOG("Device has been deleted!\r\n"); - WritePara((uint8_t *)&GateWay->ConfigPara, sizeof(GWConfigPara_t)); -} - -/***************************************************************************************** -* 函数名称: DebugCmdLsCommUnit -* 功能描述: 查看通讯单元信息 -* 参 数: argc, 输入参数数量 - argv, 输入参数 -* 返 回 值: 无 -*****************************************************************************************/ -void DebugCmdLsCommUnit(int argc, char *argv[]) -{ - DBG_LOG("\r\n"); - if(strcmp(argv[1], "?") == 0) { - DBG_LOG("Debug Cmd: culs\r\n\ - brief --> Viewing Communication Unit Information.\r\n\r\n"); - return; - } - - if(GateWay->ConfigPara.Rs485Ch1.CommUnitEnable == true) { - DBG_LOG("DevType: 8001\r\n"); - DBG_LOG("DevMac: 01-80-02-00-00-01\r\n"); - DBG_LOG("SensorNum: %d\r\n", GateWay->ConfigPara.Rs485Ch1.CUData.Para.SensorN); - DBG_LOG("SensorType: "); - for(int i = 0; i < GateWay->ConfigPara.Rs485Ch1.CUData.Para.SensorN; i++) { - DBG_LOG("%04X ", GateWay->ConfigPara.Rs485Ch1.CUData.Para.SensorType[i]); - } - DBG_LOG("\r\n\r\n"); - } - - if(GateWay->ConfigPara.Rs485Ch2.CommUnitEnable == true) { - DBG_LOG("DevType: 8002\r\n"); - DBG_LOG("DevMac: 01-80-02-00-00-02\r\n"); - DBG_LOG("SensorNum: %d\r\n", GateWay->ConfigPara.Rs485Ch2.CUData.Para.SensorN); - DBG_LOG("SensorType: "); - for(int i = 0; i < GateWay->ConfigPara.Rs485Ch2.CUData.Para.SensorN; i++) { - DBG_LOG("%04X ", GateWay->ConfigPara.Rs485Ch2.CUData.Para.SensorType[i]); - } - DBG_LOG("\r\n\r\n"); - } - - int CUCnt = 0; - for(int i = 0; i < COMMUNIT_NUM_MAX; i++) { - if(GateWay->ConfigPara.CommUnitArray[i].RegFlag == true) { - CUCnt++; - CommUnitPara_t CU; - memcpy(&CU, &GateWay->ConfigPara.CommUnitArray[i], sizeof(CommUnitPara_t)); - DBG_LOG("DevType: %04X\r\n", GateWay->ConfigPara.CommUnitArray[i].CUType); - DBG_LOG("DevMac: %02X-%02X-%02X-%02X-%02X-%02X\r\n", - GateWay->ConfigPara.CommUnitArray[i].Mac[0][0], - GateWay->ConfigPara.CommUnitArray[i].Mac[0][1], - GateWay->ConfigPara.CommUnitArray[i].Mac[0][2], - GateWay->ConfigPara.CommUnitArray[i].Mac[0][3], - GateWay->ConfigPara.CommUnitArray[i].Mac[0][4], - GateWay->ConfigPara.CommUnitArray[i].Mac[0][5]); - DBG_LOG("SensorNum: %d\r\n", GateWay->ConfigPara.CommUnitArray[i].SensorN); - DBG_LOG("SensorType: "); - for(int j = 0; j < GateWay->ConfigPara.CommUnitArray[i].SensorN; j++) { - DBG_LOG("%04X ", GateWay->ConfigPara.CommUnitArray[i].SensorType[j]); - } - DBG_LOG("\r\n\r\n"); - } - } - if(CUCnt ==0) { - DBG_LOG("No device is registered.\r\n"); - } -} - -/***************************************************************************************** -* 函数名称: DebugCmdSetComm -* 功能描述: 设置网关与服务通讯方式 -* 参 数: argc, 输入参数数量 - argv, 输入参数 -* 返 回 值: 无 -*****************************************************************************************/ -void DebugCmdSetComm(int argc, char *argv[]) -{ - DBG_LOG("\r\n"); - if(argc < 2) - return; - - if(strcmp(argv[1], "?") == 0) { - DBG_LOG("Debug Cmd: comm arg1\r\n"); - DBG_LOG(" brief --> Set gateway and service communication methods.\r\n"); - DBG_LOG(" arg1 --> para: (cat1, eth),Cat1 or ETH communication.\r\n\r\n"); - return; - } - - if(strcmp(argv[1], "cat1") == 0) { - GateWay->ConfigPara.Comm = CATONE_COMM; - CAT1_ON(); - CatOneReset(); - DBG_LOG("Set the communication method to Cat1.\r\n"); - WritePara((uint8_t *)&GateWay->ConfigPara, sizeof(GWConfigPara_t)); - } - else if(strcmp(argv[1], "eth") == 0) { - DBG_LOG("Set the communication method to Eth.\r\n"); - if(GateWay->ConfigPara.Comm == CATONE_COMM) { - CAT1_PWR_KEY_CLR(); - CatOneStop(); - rt_thread_delay(3000); - CAT1_PWR_KEY_SET(); - } - - GateWay->ConfigPara.Comm = ETH_COMM; - ETH_ON(); - WritePara((uint8_t *)&GateWay->ConfigPara, sizeof(GWConfigPara_t)); - } - -} - -/***************************************************************************************** -* 函数名称: DebugCmdSetCollTime -* 功能描述: 设置数据采集间隔 -* 参 数: argc, 输入参数数量 - argv, 输入参数 -* 返 回 值: 无 -*****************************************************************************************/ -void DebugCmdSetCollTime(int argc, char *argv[]) -{ - DBG_LOG("\r\n"); - if(argc < 2) - return; - - if(strcmp(argv[1], "?") == 0) { - DBG_LOG("Debug Cmd: sct para\r\n"); - DBG_LOG(" brief --> Set the data collection interval.\r\n"); - DBG_LOG(" arg1 --> para: (10~3600),Set the range from 10 to 3600 seconds.\r\n\r\n"); - return; - } - - int time = atoi(argv[1]); - if(time < 10 && time > 7200) { - DBG_LOG("RS485 Cmd Para Error!\r\n"); - return; - } - GateWay->ConfigPara.CommUnitReadInterval = time; - DBG_LOG("Set the collection time interval to %d seconds.\r\n", time); - WritePara((uint8_t *)&GateWay->ConfigPara, sizeof(GWConfigPara_t)); -} - -/***************************************************************************************** -* 函数名称: DebugCmdReadHisData -* 功能描述: 读取历史数据 -* 参 数: argc, 输入参数数量 - argv, 输入参数 -* 返 回 值: 无 -*****************************************************************************************/ -void DebugCmdReadHisData(int argc, char *argv[]) -{ - DBG_LOG("\r\n"); - int StartIdx; - int ReadNum; - LogHeader_t Header; - uint8_t *Data; - char *AsciiData; - int ret; - int LogIdx; - - if(argc < 2) - return; - - if(strcmp(argv[1], "?") == 0) { - DBG_LOG("Debug Cmd: his arg1 arg2\r\n"); - DBG_LOG(" brief --> Read historical data.\r\n"); - DBG_LOG(" arg1 --> start_num: The starting number of historical data.\r\n"); - DBG_LOG(" start_num = (all),Read all historical data.\r\n"); - DBG_LOG(" arg2 --> read_num: The number of historical data.\r\n\r\n"); - return; - } - - if(strcmp(argv[1], "all") == 0) { - StartIdx = 1; - ReadNum = 0xffffffff; - } - StartIdx = atoi(argv[1]); - ReadNum = atoi(argv[2]); - if(StartIdx <= 0 || ReadNum <= 0) { - DBG_LOG("His Cmd Para Error!\r\n"); - return; - } - - if(StartIdx > 1) { - ret = ReadLog(&Header, &Data, 1); - if(ret == 0) { - DBG_LOG("His Cmd Read Error!\r\n"); - return; - } - rt_free(Data); - if(Header.LogIdx > StartIdx) { - DBG_LOG("His Cmd StartIdx Error, Read First Log, StartIdx = %d!\r\n, Header.LogIdx"); - LogIdx = Header.LogIdx; - } - else { - if(Header.LogIdx == StartIdx) { - Header.LogEndAddr = 0; - } - LogIdx = StartIdx; - } - - } - else { - LogIdx = 1; - } - while(ReadNum > 0) { - ret = ReadLog(&Header, &Data, LogIdx); - if(ret == 0) - return; - - LogIdx++; - ReadNum--; - AsciiData = rt_malloc(ret * 2 + 2); - HexToAscii(Data, AsciiData, ret); - AsciiData[2 * ret] = 0; - DBG_LOG("LogIdx: %d, Data %s\r\n", Header.LogIdx, AsciiData); - rt_free(AsciiData); - rt_free(Data); - } -} - -/***************************************************************************************** -* 函数名称: DebugCmdDelHisData -* 功能描述: 删除历史数据 -* 参 数: argc, 输入参数数量 - argv, 输入参数 -* 返 回 值: 无 -*****************************************************************************************/ -void DebugCmdDelHisData(int argc, char *argv[]) -{ - DBG_LOG("\r\n"); - if(strcmp(argv[1], "?") == 0) { - DBG_LOG("Debug Cmd: fmt\r\n\ - brief --> Delete historical data.\r\n\r\n"); - return; - } - - SavLogNum(0); - DBG_LOG("The historical data has been deleted.\r\n"); -} - -/***************************************************************************************** -* 函数名称: DebugCmdGetHisInfo -* 功能描述: 获取历史数据信息 -* 参 数: argc, 输入参数数量 - argv, 输入参数 -* 返 回 值: 无 -*****************************************************************************************/ -void DebugCmdGetHisInfo(int argc, char *argv[]) -{ - DBG_LOG("\r\n"); - uint32_t LogN; - LogHeader_t Header; - uint8_t *Data; - - if(strcmp(argv[1], "?") == 0) { - DBG_LOG("Debug Cmd: hinf\r\n\ - brief --> Obtain historical data information.\r\n\r\n"); - return; - } - - LogN = ReadLogNum(); - if(LogN == 0) { - DBG_LOG("LogN: 0\r\n"); - DBG_LOG("FirstLogIdx: 0\r\n"); - DBG_LOG("FirstLogAddr: %d\r\n", ReadFirstLogStartAddr()); - DBG_LOG("LastLogEndAddr: %d\r\n", ReadLastLogEndAddr()); - return; - } - Header.LogEndAddr = 0; - int ret = ReadLog(&Header, &Data, 0); - if(ret == 0) { - DBG_LOG("Read log information error.\r\n"); - return; - } - rt_free(Data); - DBG_LOG("LogN: %d\r\n", LogN - Header.LogIdx + 1); - DBG_LOG("FirstLogIdx: %d\r\n", Header.LogIdx); - DBG_LOG("FirstLogAddr: %d\r\n", ReadFirstLogStartAddr()); - DBG_LOG("LastLogEndAddr: %d\r\n", ReadLastLogEndAddr()); -} - -/***************************************************************************************** -* 函数名称: DebugCmdRestoreFactory -* 功能描述: 恢复出厂设置 -* 参 数: argc, 输入参数数量 - argv, 输入参数 -* 返 回 值: 无 -*****************************************************************************************/ -void DebugCmdRestoreFactory(int argc, char *argv[]) -{ - DBG_LOG("\r\n"); - if(strcmp(argv[1], "?") == 0) { - DBG_LOG("Debug Cmd: res\r\n\ - brief --> Restore to factory.\r\n\r\n"); - return; - } - - memset((uint8_t *)&GateWay->ConfigPara, 0x00, sizeof(GWConfigPara_t)); - WritePara((uint8_t *)&GateWay->ConfigPara, sizeof(GWConfigPara_t)); - DBG_LOG("Restore factory settings, GateWay Restart...\r\n"); - rt_thread_delay(1000); - NVIC_SystemReset(); - while(1); -} - -/***************************************************************************************** -* 函数名称: DebugCmdRestoreFactory -* 功能描述: 恢复出厂设置 -* 参 数: argc, 输入参数数量 - argv, 输入参数 -* 返 回 值: 无 -*****************************************************************************************/ -void DebugCmdReboot(int argc, char *argv[]) -{ - DBG_LOG("\r\n"); - if(strcmp(argv[1], "?") == 0) { - DBG_LOG("Debug Cmd: reboot\r\n\ - brief --> System Reboot.\r\n\r\n"); - return; - } - - DBG_LOG("GateWay Reboot...\r\n"); - rt_thread_delay(1000); - NVIC_SystemReset(); - while(1); -} - -/***************************************************************************************** -* 函数名称: DebugCmdSetSensorCollectTime -* 功能描述: 设置采集时间 -* 参 数: argc, 输入参数数量 - argv, 输入参数 -* 返 回 值: 无 -*****************************************************************************************/ -void DebugCmdSetCollectTime(int argc, char *argv[]) -{ - DBG_LOG("\r\n"); - uint8_t sData[50]; - uint8_t sLen; - - if(argc < 2) - return; - - if(strcmp(argv[1], "?") == 0) { - DBG_LOG("Debug Cmd: sct arg1 arg2\r\n"); - DBG_LOG(" brief --> Set the sensor collection time.\r\n"); - DBG_LOG(" arg1 --> (cu, se)cu: CommUnit, Se: Sensor\r\n"); - DBG_LOG(" arg1 --> (10--7200)Second.\r\n\r\n"); - return; - } - - int IntervalTime = atoi(argv[2]); - - if(IntervalTime < 10 && IntervalTime > 7200) { - DBG_LOG("SCT Cmd Para Error!\r\n"); - return; - } - - if(strcmp(argv[1], "cu") == 0) { - GateWay->ConfigPara.CommUnitReadInterval = IntervalTime; - DBG_LOG(" Set the CommUnit collect time to %d seconds\r\n", IntervalTime); - WritePara((uint8_t *)&GateWay->ConfigPara, sizeof(GWConfigPara_t)); - } - else if(strcmp(argv[1], "se") == 0) { - FrameHeader Header = (FrameHeader)sData; - Header->Header = 0x7C; - Header->SlvAddr = 00; - Header->Cmd = RS485_SENSOR_CMD_SET_INV_TIME; - //Header->DevType = 0; - Header->PayloadLen = 2; - - sLen = sizeof(FrameHeader_t); - - sData[sLen++] = IntervalTime & 0x00ff; - sData[sLen++] = (IntervalTime >> 8) & 0x00ff; - - uint16_t Check = CRC_Modbus(0xA001, sData, sLen); - - sData[sLen++] = Check & 0xff; - sData[sLen++] = (Check >> 0x08) & 0x00ff; - - if(GateWay->ConfigPara.Rs485Ch1.Enable == true && GateWay->ConfigPara.Rs485Ch1.CommUnitEnable == true) - GateWay->ConfigPara.Rs485Ch1.RS485Send(sData, sLen); - if(GateWay->ConfigPara.Rs485Ch2.Enable == true && GateWay->ConfigPara.Rs485Ch2.CommUnitEnable == true) - GateWay->ConfigPara.Rs485Ch2.RS485Send(sData, sLen); - - DBG_LOG("Set the Sensor collect time to %d seconds\r\n", IntervalTime); - } - else { - DBG_LOG("SCT Cmd Para Error!\r\n"); - } -} - -/***************************************************************************************** -* 函数名称: DebugCmdTimeSync -* 功能描述: 时间同步 -* 参 数: argc, 输入参数数量 - argv, 输入参数 -* 返 回 值: 无 -*****************************************************************************************/ -void DebugCmdTimeSync(int argc, char *argv[]) -{ - DBG_LOG("\r\n"); - uint32_t year, month, day, hour, min, sec; - uint8_t ret; - if(argc < 2) - return; - - if(strcmp(argv[1], "?") == 0) { - DBG_LOG("Debug Cmd: time\r\n"); - DBG_LOG(" brief --> Time synchronization.\r\n"); - DBG_LOG(" args --> (time YYYY-MM-DD,hh:mm:ss)Set system time.\r\n\r\n"); - return; - } - - ret = sscanf(argv[1], "%d-%d-%d,%d:%d:%d\r\n", &year, &month, &day, &hour, &min, &sec); - if(ret != 6 || year < 2022 || year > 2099 || month > 12 || day > 31 || hour > 60 || min > 60 || sec > 60) { - DBG_LOG("Parameter error.\r\n"); - return; - } - else - TimeSync2(year - 2000, month, day, hour, min, sec); - - DBG_LOG("Time Sync: "); - uint32_t ctime = TimeTs(); - struct tm *stime; - stime = localtime(&ctime); - DBG_LOG("%d/",stime->tm_year + 1900); - DBG_LOG("%d/",stime->tm_mon + 1); - DBG_LOG("%d-",stime->tm_mday); - DBG_LOG("%d:",stime->tm_hour); - DBG_LOG("%d:",stime->tm_min); - DBG_LOG("%d\r\n",stime->tm_sec); -} - -/***************************************************************************************** -* 函数名称: DebugCmdTimeSync -* 功能描述: 查询内置通讯单元传感器 -* 参 数: argc, 输入参数数量 - argv, 输入参数 -* 返 回 值: 无 -*****************************************************************************************/ -extern SensorCommPara_t SComm1Para; -extern SensorCommPara_t SComm2Para; -void DebugCmdQuerySensor(int argc, char *argv[]) -{ - DBG_LOG("\r\n"); - if(strcmp(argv[1], "?") == 0) { - DBG_LOG("Debug Cmd: qs\r\n"); - DBG_LOG(" brief --> Query the sensors of the internal CommUnit.\r\n\r\n"); - return; - } - - if(GateWay->ConfigPara.Rs485Ch1.Enable == true && GateWay->ConfigPara.Rs485Ch1.CommUnitEnable == true) { - DBG_LOG("Query Rs485Ch1...\r\n"); - GateWay->ConfigPara.Rs485Ch1.QuerySensorFlag = true; - GateWay->ConfigPara.Rs485Ch1.CUData.Para.SensorN = 0; - memset(GateWay->ConfigPara.Rs485Ch1.CUData.Para.SensorType, 0x00, sizeof(GateWay->ConfigPara.Rs485Ch1.CUData.Para.SensorType)); - SComm1Para.SensorCnt = 0; - } - if(GateWay->ConfigPara.Rs485Ch2.Enable == true && GateWay->ConfigPara.Rs485Ch2.CommUnitEnable == true) { - DBG_LOG("Query Rs485Ch2...\r\n"); - GateWay->ConfigPara.Rs485Ch2.QuerySensorFlag = true; - GateWay->ConfigPara.Rs485Ch2.CUData.Para.SensorN = 0; - memset(GateWay->ConfigPara.Rs485Ch2.CUData.Para.SensorType, 0x00, sizeof(GateWay->ConfigPara.Rs485Ch2.CUData.Para.SensorType)); - SComm2Para.SensorCnt = 0; - } -} - - -/***************************************************************************************** -* 函数名称: DebugCmdSelDebugChannel -* 功能描述: 选择调试信息输出通道， -* 参 数: argc, 输入参数数量 - argv, 输入参数 -* 返 回 值: 无 -*****************************************************************************************/ -void DebugCmdSelDebugChannel(int argc, char *argv[]) -{ - DBG_LOG("\r\n"); - if(argc < 2) - return; - - if(strcmp(argv[1], "?") == 0) { - DBG_LOG("Debug Cmd: dch\r\n"); - DBG_LOG(" brief --> Debug information output channel selection.\r\n"); - DBG_LOG(" args --> (dbg|ch1|ch2) default: dbg\r\n"); - DBG_LOG(" dbg: On board debugging serial port.\r\n"); - DBG_LOG(" ch1: RS485 channel 1 serial port.\r\n"); - DBG_LOG(" ch2: RS485 channel 2 serial port.\r\n"); - DBG_LOG(" note --> When selecting ch1 or ch2, the channel must enable an disable internal CommUnit function before it can be used.\r\n\r\n"); - return; - } - - if(strcmp(argv[1], "dbg") == 0) { - DBG_LOG("Select Debug Channel is dbg\r\n"); - GateWay->ConfigPara.DebugChannel = DEBUG_CH_DBG; - WritePara((uint8_t *)&GateWay->ConfigPara, sizeof(GWConfigPara_t)); - } - else if(strcmp(argv[1], "ch1") == 0) { - if (GateWay->ConfigPara.Rs485Ch1.CommUnitEnable == true){ - DBG_LOG("RS485 channel 1 CommUnit function is not disabled\r\n"); - return; - } - DBG_LOG("Select Debug Channel is RS485_CH1\r\n"); - GateWay->ConfigPara.Rs485Ch1.BaudRate = 500000; - GateWay->ConfigPara.Rs485Ch1.Enable = true; - RS485Ch1_Config(GateWay->ConfigPara.Rs485Ch1.BaudRate); - GateWay->ConfigPara.DebugChannel = DEBUG_CH_RS485_1; - WritePara((uint8_t *)&GateWay->ConfigPara, sizeof(GWConfigPara_t)); - } - - else if(strcmp(argv[1], "ch2") == 0) { - if (GateWay->ConfigPara.Rs485Ch2.CommUnitEnable == true){ - DBG_LOG("RS485 channel 2 CommUnit function is not disabled\r\n"); - return; - } - DBG_LOG("Select Debug Channel is RS485_CH2\r\n"); - GateWay->ConfigPara.Rs485Ch2.BaudRate = 500000; - GateWay->ConfigPara.Rs485Ch2.Enable = true; - RS485Ch2_Config(GateWay->ConfigPara.Rs485Ch2.BaudRate); - GateWay->ConfigPara.DebugChannel = DEBUG_CH_RS485_2; - WritePara((uint8_t *)&GateWay->ConfigPara, sizeof(GWConfigPara_t)); - } -} - -/***************************************************************************************** -* 函数名称: DebugCmdSetSvr -* 功能描述: 设置服务器地址、端口 -* 参 数: argc, 输入参数数量 - argv, 输入参数 -* 返 回 值: 无 -*****************************************************************************************/ -static void DebugCmdSetSvr(int argc, char *argv[]) -{ - DBG_LOG("\r\n"); - int IP[4]; - int port; - - if(argc < 3) - return; - - if(strcmp(argv[1], "?") == 0) { - DBG_LOG("Debug Cmd: arg1 arg2\r\n"); - DBG_LOG(" brief --> Set the server IP address and port for 4G communication.\r\n"); - DBG_LOG(" arg1 --> (xx.xx.xx.xx) ip\r\n"); - DBG_LOG(" arg2 --> port\r\n\r\n"); - return; - } - - char *IpStr = argv[1]; - - int ret = sscanf(IpStr, "%d.%d.%d.%d", &IP[0], &IP[1], &IP[2], &IP[3]); - if(ret != 4) - return; - if(IP[0] > 0xff || IP[1] > 0xff || IP[2] > 0xff || IP[3] > 0xff) - return; - - port = atoi(argv[2]); - if(port > 0xffff) - return; - - GateWay->ConfigPara.SvrAddr[0] = IP[0]; - GateWay->ConfigPara.SvrAddr[1] = IP[1]; - GateWay->ConfigPara.SvrAddr[2] = IP[2]; - GateWay->ConfigPara.SvrAddr[3] = IP[3]; - GateWay->ConfigPara.SvrPort = port; - - WritePara((uint8_t *)&GateWay->ConfigPara, sizeof(GWConfigPara_t)); - DBG_LOG("Set server ip and port completed.\r\n"); -} - -/***************************************************************************************** -* 函数名称: DebugCmdSetMac -* 功能描述: 设置MAC地址 -* 参 数: argc, 输入参数数量 - argv, 输入参数 -* 返 回 值: 无 -*****************************************************************************************/ -static void DebugCmdSetMac(int argc, char *argv[]) -{ - DBG_LOG("\r\n"); - uint8_t mac[6]; - - if(argc < 2) - return; - - if(strcmp(argv[1], "?") == 0) { - DBG_LOG("Debug Cmd: mac arg1 arg2\r\n"); - DBG_LOG(" brief --> Set the server IP address and port for 4G communication.\r\n"); - DBG_LOG(" arg1 --> psw\r\n"); - DBG_LOG(" arg2 --> mac(xx-xx-xx-xx-xx-xx)\r\n\r\n"); - return; - } - - if(strcmp(argv[1], "gxjt") != 0) { - DBG_LOG("Password Error\r\n"); - return; - } - - int ret = sscanf(argv[2], "%02X-%02X-%02X-%02X-%02X-%02X", - (int *)&mac[0], (int *)&mac[1], (int *)&mac[2], (int *)&mac[3], (int *)&mac[4], (int *)&mac[5]); - if(ret != 6) - return; - - memcpy(GateWay->ConfigPara.GwMac, mac, 6); -// GateWay->ConfigPara.Rs485Ch1.CUData.Para.Mac[0][3] = GateWay->ConfigPara.GwMac[4]; -// GateWay->ConfigPara.Rs485Ch1.CUData.Para.Mac[0][4] = GateWay->ConfigPara.GwMac[5]; -// GateWay->ConfigPara.Rs485Ch2.CUData.Para.Mac[0][3] = GateWay->ConfigPara.GwMac[4]; -// GateWay->ConfigPara.Rs485Ch2.CUData.Para.Mac[0][4] = GateWay->ConfigPara.GwMac[5]; - WritePara((uint8_t *)&GateWay->ConfigPara, sizeof(GWConfigPara_t)); - DBG_LOG("Set gateway mac Address completed.\r\n"); -} - - -/***************************************************************************************** -* 函数名称: DebugCmdGetPara -* 功能描述: 查看参数 -* 参 数: argc, 输入参数数量 - argv, 输入参数 -* 返 回 值: 无 -*****************************************************************************************/ -static void DebugCmdGetPara(int argc, char *argv[]) -{ - DBG_LOG("\r\n"); - if(argc > 1) { - if(strcmp(argv[1], "?") == 0) { - DBG_LOG("Debug Cmd: para\r\n"); - DBG_LOG(" brief --> View gateway parameters.\r\n\r\n"); - return; - } - } - DBG_LOG("\r\n**********************************************************\r\n"); - DBG_LOG("SoftWare V:%d.%d, HardWare V:%d.%d\r\n", SOFTWARE_VERSION / 10, SOFTWARE_VERSION % 10, HARDWARE_VERSION / 10, HARDWARE_VERSION % 10); - DBG_LOG("GateWay MAC: %02X-%02X-%02X-%02X-%02X-%02X\r\n", - GateWay->ConfigPara.GwMac[0], GateWay->ConfigPara.GwMac[1], GateWay->ConfigPara.GwMac[2], GateWay->ConfigPara.GwMac[3], GateWay->ConfigPara.GwMac[4], GateWay->ConfigPara.GwMac[5]); - DBG_LOG("Battery: %d%\r\n", GateWay->Battery); - DBG_LOG("CommInf: %s\r\n", (GateWay->ConfigPara.Comm == CATONE_COMM) ? "Cat1" : "Eth"); - if(GateWay->ConfigPara.Comm == CATONE_COMM) { - char Imei[20], Sim[32]; - CatReadImeiOrSim(Imei, Sim); - DBG_LOG("Cat1 IMEI: %s\r\n", Imei); - DBG_LOG("Cat1 SIM: %s\r\n", Sim); - } - DBG_LOG("CommUnitReadInterval: %d\r\n", GateWay->ConfigPara.CommUnitReadInterval); - DBG_LOG("Svr MAC: %02X-%02X-%02X-%02X-%02X-%02X\r\n", - GateWay->SvrMac[0], GateWay->SvrMac[1], GateWay->SvrMac[2], GateWay->SvrMac[3], GateWay->SvrMac[4], GateWay->SvrMac[5]); - DBG_LOG("Svr IP: %d.%d.%d.%d\r\n", - GateWay->ConfigPara.SvrAddr[0], GateWay->ConfigPara.SvrAddr[1], GateWay->ConfigPara.SvrAddr[2], GateWay->ConfigPara.SvrAddr[3]); - DBG_LOG("Svr Port: %d\r\n", GateWay->ConfigPara.SvrPort); - DBG_LOG("Register Status: %d\r\n", GateWay->SvrRegFlag); - DBG_LOG("RS485Ch1 Mac: %02X-%02X-%02X-%02X-%02X-%02X\r\n", - GateWay->ConfigPara.Rs485Ch1.CUData.Para.Mac[0][0],GateWay->ConfigPara.Rs485Ch1.CUData.Para.Mac[0][1], - GateWay->ConfigPara.Rs485Ch1.CUData.Para.Mac[0][2],GateWay->ConfigPara.Rs485Ch1.CUData.Para.Mac[0][3], - GateWay->ConfigPara.Rs485Ch1.CUData.Para.Mac[0][4],GateWay->ConfigPara.Rs485Ch1.CUData.Para.Mac[0][5]); - DBG_LOG("RS485Ch1: %s, ", (GateWay->ConfigPara.Rs485Ch1.Enable == true) ? "Enable" : "Disable"); - DBG_LOG("InCommUnit %s, ", (GateWay->ConfigPara.Rs485Ch1.CommUnitEnable == true) ? "Enable" : "Disable"); - DBG_LOG("Vout %s, ", (GateWay->ConfigPara.Rs485Ch1.Power == true) ? "Enable" : "Disable"); - DBG_LOG("Baudrate %d\r\n", GateWay->ConfigPara.Rs485Ch1.BaudRate); - DBG_LOG("RS485Ch2 Mac: %02X-%02X-%02X-%02X-%02X-%02X\r\n", - GateWay->ConfigPara.Rs485Ch2.CUData.Para.Mac[0][0],GateWay->ConfigPara.Rs485Ch2.CUData.Para.Mac[0][1], - GateWay->ConfigPara.Rs485Ch2.CUData.Para.Mac[0][2],GateWay->ConfigPara.Rs485Ch2.CUData.Para.Mac[0][3], - GateWay->ConfigPara.Rs485Ch2.CUData.Para.Mac[0][4],GateWay->ConfigPara.Rs485Ch2.CUData.Para.Mac[0][5]); - DBG_LOG("RS485Ch2: %s, ", (GateWay->ConfigPara.Rs485Ch2.Enable == true) ? "Enable" : "Disable"); - DBG_LOG("InCommUnit %s, ", (GateWay->ConfigPara.Rs485Ch2.CommUnitEnable == true) ? "Enable" : "Disable"); - DBG_LOG("Vout %s, ", (GateWay->ConfigPara.Rs485Ch2.Power == true) ? "Enable" : "Disable"); - DBG_LOG("Baudrate %d\r\n", GateWay->ConfigPara.Rs485Ch2.BaudRate); - - DBG_LOG("Lora: ch %d, rp %d, fc %d\r\n", GateWay->ConfigPara.Lora.ucChannel, GateWay->ConfigPara.Lora.RegPreamble, GateWay->ConfigPara.Lora.FreqCent); - - struct tm *stime; - uint32_t dwStamp = TimeTs(); - stime = localtime(&dwStamp); - DBG_LOG("%d/",stime->tm_year + 1900); - DBG_LOG("%d/",stime->tm_mon + 1); - DBG_LOG("%d-",stime->tm_mday); - DBG_LOG("%d:",stime->tm_hour); - DBG_LOG("%d:",stime->tm_min); - DBG_LOG("%d\r\n",stime->tm_sec); - DBG_LOG("**********************************************************\r\n"); -} - -/***************************************************************************************** -* 函数名称: DebugCmdCali -* 功能描述: 校准传感器 -* 参 数: argc, 输入参数数量 - argv, 输入参数 -* 返 回 值: 无 -*****************************************************************************************/ -static void DebugCmdCali(int argc, char *argv[]) -{ - DBG_LOG("\r\n"); - uint8_t mac[6]; - uint8_t Rs485Cmd[8] = {0x7a, 0x00, 0x01, 0x00, 0x00, 0x00, 0x0a, 0x7d}; - uint8_t CommUnitCmd[20]; - CommUnitFrameHeader CUFrame; - - if(argc < 2) - return; - - if(argc > 1) { - if(strcmp(argv[1], "?") == 0) { - DBG_LOG("Debug Cmd: cali\r\n"); - DBG_LOG(" brief --> Calibrate the sensor.\r\n\r\n"); - DBG_LOG(" arg1 --> mac: communication unit Mac address.\r\n"); - DBG_LOG(" mac = (XX-XX-XX-XX-XX-XX), Calibrate specified MAC communication unit.\r\n"); - DBG_LOG(" mac = (all), Calibrate all communication units.\r\n\r\n"); - return; - } - } - - CUFrame = (CommUnitFrameHeader)CommUnitCmd; - CUFrame->Header = 0x7B; - memcpy(CUFrame->GWMac, GateWay->ConfigPara.GwMac, 6); - memset(CUFrame->DevMac, 0x00, 6); - CUFrame->Cmd = 0x01; - //CUFrame->DevType = 0x8002; - CUFrame->PayloadLen = 0; - uint16_t crc16 = CRC_Modbus(0xA001, CommUnitCmd, sizeof(CommUnitFrameHeader_t)); - CommUnitCmd[sizeof(CommUnitFrameHeader_t)] = crc16 & 0x00ff; - CommUnitCmd[sizeof(CommUnitFrameHeader_t) + 1] = (crc16 >> 8) & 0x00ff; - - if(strcmp(argv[1], "all") == 0) { - if(GateWay->ConfigPara.Rs485Ch1.Enable == true) { - if(GateWay->ConfigPara.Rs485Ch1.CommUnitEnable == true) { - GateWay->ConfigPara.Rs485Ch1.RS485Send(Rs485Cmd, 8); - } - else { - GateWay->ConfigPara.Rs485Ch1.RS485Send(CommUnitCmd, sizeof(CommUnitFrameHeader_t) + 2); - } - } - if(GateWay->ConfigPara.Rs485Ch2.Enable == true) { - if(GateWay->ConfigPara.Rs485Ch2.CommUnitEnable == true) { - GateWay->ConfigPara.Rs485Ch2.RS485Send(Rs485Cmd, 8); - } - else { - GateWay->ConfigPara.Rs485Ch2.RS485Send(CommUnitCmd, sizeof(CommUnitFrameHeader_t) + 2); - } - } - - for(int i = 0; i < COMMUNIT_NUM_MAX; i++)//参数遍历 - { - if(GateWay->ConfigPara.CommUnitArray[i].RegFlag == true) - GateWay->ConfigPara.CommUnitArray[i].CailFlag = true;//校准置位，等待下次此MAC主设备上传数据时下发校准指令（低功耗） - } - //Sx1276LoRaSendBuffer(CommUnitCmd, sizeof(CommUnitFrameHeader_t) + 2);//低功耗模式下不用下发 - - DBG_LOG("Calibrate all communication units.\r\n"); - return; - } - - int ret = sscanf(argv[1], "%x-%x-%x-%x-%x-%x", - (int *)&mac[0], (int *)&mac[1], (int *)&mac[2], (int *)&mac[3], (int *)&mac[4], (int *)&mac[5]); - if(ret != 6) { - DBG_LOG("Cali Cmd Para Error!\r\n"); - return; - } - - if(memcmp(mac, GateWay->ConfigPara.Rs485Ch1.CUData.Para.Mac[0], 6) == 0) { - if(!GateWay->ConfigPara.Rs485Ch1.Enable || !GateWay->ConfigPara.Rs485Ch1.CommUnitEnable) { - DBG_LOG("Internal communication unit 1 is turned off!\r\n"); - return; - } - GateWay->ConfigPara.Rs485Ch1.RS485Send(Rs485Cmd, 8); - DBG_LOG("Calibrate internal communication unit 1!\r\n"); - return; - } - - if(memcmp(mac, GateWay->ConfigPara.Rs485Ch2.CUData.Para.Mac[0], 6) == 0) { - if(!GateWay->ConfigPara.Rs485Ch2.Enable || !GateWay->ConfigPara.Rs485Ch2.CommUnitEnable) { - DBG_LOG("Internal communication unit 2 is turned off!\r\n"); - return; - } - GateWay->ConfigPara.Rs485Ch2.RS485Send(Rs485Cmd, 8); - DBG_LOG("Calibrate internal communication unit 2!\r\n"); - } - - ret = CheckCommUnitReg(GateWay, mac); - if(ret < 0) { - DBG_LOG("The CommUnit was not found!\r\n"); - return; - } - - memcpy(CUFrame->DevMac, mac, 6); - crc16 = CRC_Modbus(0xA001, CommUnitCmd, sizeof(CommUnitFrameHeader_t)); - CommUnitCmd[sizeof(CommUnitFrameHeader_t)] = crc16 & 0x00ff; - CommUnitCmd[sizeof(CommUnitFrameHeader_t) + 1] = (crc16 >> 8) & 0x00ff; - - if(mac[2] == 0x01) { //LORA通讯 - if(GateWay->ConfigPara.CommUnitArray[ret].RegFlag == true) - GateWay->ConfigPara.CommUnitArray[ret].CailFlag = true;//校准置位，等待下次此MAC主设备上传数据时下发校准指令（低功耗） - DBG_LOG("Wait for the device to respond. Mac:%02X-%02X-%02X-%02X-%02X-%02X\r\n", - CUFrame->DevMac[0], CUFrame->DevMac[1], CUFrame->DevMac[2], CUFrame->DevMac[3], CUFrame->DevMac[4], CUFrame->DevMac[5]); - //Sx1276LoRaSendBuffer(CommUnitCmd, sizeof(CommUnitFrameHeader_t) + 2); - } - else if(mac[2] == 0x02) { //RS485通讯 - if(GateWay->ConfigPara.Rs485Ch1.Enable == true && !GateWay->ConfigPara.Rs485Ch1.CommUnitEnable) { - GateWay->ConfigPara.Rs485Ch1.RS485Send(Rs485Cmd, sizeof(CommUnitFrameHeader_t) + 2); - DBG_LOG("Calibrate CommUnit: %s!\r\n", argv[1]); - } - else if(GateWay->ConfigPara.Rs485Ch2.Enable == true && !GateWay->ConfigPara.Rs485Ch2.CommUnitEnable) { - GateWay->ConfigPara.Rs485Ch2.RS485Send(Rs485Cmd, sizeof(CommUnitFrameHeader_t) + 2); - DBG_LOG("Calibrate CommUnit: %s!\r\n", argv[1]); - } - else { - DBG_LOG("Communication unit type error.\r\n"); - } - } -} -/***************************************************************************************** -* 函数名称: DebugLaserConfig -* 功能描述: 激光控制 -* 参 数: argc, 输入参数数量 - argv, 输入参数 -* 返 回 值: 无 -*****************************************************************************************/ -static void DebugLaserConfig(int argc, char *argv[]) -{ - DBG_LOG("\r\n"); - uint8_t mac[6]; - uint8_t Rs485Cmd[8] = {0x7a, 0x00, 0x01, 0x00, 0x00, 0x00, 0x0a, 0x7d}; - uint8_t CommUnitCmd[20]; - uint8_t len; - uint16_t crc16; - CommUnitFrameHeader CUFrame; - - if(argc < 2) - return; - - if(argc > 1) { - if(strcmp(argv[1], "?") == 0) { - DBG_LOG("Debug Cmd: laser\r\n"); - DBG_LOG(" brief --> Control laser cutting.\r\n\r\n"); - DBG_LOG(" arg1 --> mac: communication unit Mac address.\r\n"); - DBG_LOG(" mac = (XX-XX-XX-XX-XX-XX), Control specified MAC communication unit.\r\n"); - DBG_LOG(" arg2 --> state: on/off, Turn on or off the laser.\r\n\r\n"); - return; - } - } - - int ret = sscanf(argv[1], "%x-%x-%x-%x-%x-%x", - (int *)&mac[0], (int *)&mac[1], (int *)&mac[2], (int *)&mac[3], (int *)&mac[4], (int *)&mac[5]); - if(ret != 6) { - DBG_LOG("Control laser Cmd Para Error!\r\n"); - return; - } - - CUFrame = (CommUnitFrameHeader)CommUnitCmd; - CUFrame->Header = 0x7B; - memcpy(CUFrame->GWMac, GateWay->ConfigPara.GwMac, 6); - memcpy(CUFrame->DevMac, mac, 6); - CUFrame->Cmd = COMM_UNIT_CMD_CONT_LASER; - //CUFrame->DevType = 0x8002; - CUFrame->PayloadLen = 1; - - if(strcmp(argv[2], "on") == 0 || strcmp(argv[2], "off") == 0) - { - if(memcmp(mac, GateWay->ConfigPara.Rs485Ch1.CUData.Para.Mac[0], 6) == 0) { - if(!GateWay->ConfigPara.Rs485Ch1.Enable || !GateWay->ConfigPara.Rs485Ch1.CommUnitEnable) { - DBG_LOG("Internal communication unit 1 is turned off!\r\n"); - return; - } - GateWay->ConfigPara.Rs485Ch1.RS485Send(Rs485Cmd, 8); - DBG_LOG("Control internal communication unit 1!\r\n"); - return; - } - - if(memcmp(mac, GateWay->ConfigPara.Rs485Ch2.CUData.Para.Mac[0], 6) == 0) { - if(!GateWay->ConfigPara.Rs485Ch2.Enable || !GateWay->ConfigPara.Rs485Ch2.CommUnitEnable) { - DBG_LOG("Internal communication unit 2 is turned off!\r\n"); - return; - } - GateWay->ConfigPara.Rs485Ch2.RS485Send(Rs485Cmd, 8); - DBG_LOG("Control internal communication unit 2!\r\n"); - } - - ret = CheckCommUnitReg(GateWay, mac); - if(ret < 0) { - DBG_LOG("The CommUnit was not found!\r\n"); - - } - } - else - { - DBG_LOG("Parameter error!\r\n"); - return; - } - - - len = sizeof(CommUnitFrameHeader_t); - bool onoff; - if(strcmp(argv[2], "on") == 0) - { - onoff = true; - CommUnitCmd[len++] = onoff; - } - else if(strcmp(argv[2], "off") == 0) - { - onoff = false; - CommUnitCmd[len++] = onoff; - } - crc16 = CRC_Modbus(0xA001, CommUnitCmd, len); - CommUnitCmd[len++] = crc16 & 0x00ff; - CommUnitCmd[len++] = (crc16 >> 8) & 0x00ff; - - if(mac[2] == 0x01) { //LORA通讯，低功耗模式不用主动下发 - if(GateWay->ConfigPara.CommUnitArray[ret].RegFlag == true) - { - if(onoff == true) - { - GateWay->ConfigPara.CommUnitArray[ret].ContLaser = true;//控制置位，等待下次此MAC主设备上传数据时下发校准指令（低功耗） - DBG_LOG("Wait for the device to respond. Mac:%02X-%02X-%02X-%02X-%02X-%02X\r\n", - CUFrame->DevMac[0], CUFrame->DevMac[1], CUFrame->DevMac[2], CUFrame->DevMac[3], CUFrame->DevMac[4], CUFrame->DevMac[5]); - GateWay->ConfigPara.CommUnitArray[ret].LaserOnOff = onoff; - } - else if(onoff == false) - { - GateWay->ConfigPara.CommUnitArray[ret].ContLaser = false; - GateWay->ConfigPara.CommUnitArray[ret].LaserOnOff = onoff; - Sx1276LoRaSendBuffer(CommUnitCmd, len);//直接发 - } - } - } - else if(mac[2] == 0x02) { //RS485通讯 - if(GateWay->ConfigPara.Rs485Ch1.Enable == true && !GateWay->ConfigPara.Rs485Ch1.CommUnitEnable) { - GateWay->ConfigPara.Rs485Ch1.RS485Send(Rs485Cmd, len); - DBG_LOG("Control RS485 laser CommUnit: %s!\r\n", argv[1]); - } - else if(GateWay->ConfigPara.Rs485Ch2.Enable == true && !GateWay->ConfigPara.Rs485Ch2.CommUnitEnable) { - GateWay->ConfigPara.Rs485Ch2.RS485Send(Rs485Cmd, len); - DBG_LOG("Control RS485 laser CommUnit: %s!\r\n", argv[1]); - } - else { - DBG_LOG("Communication unit type error.\r\n"); - } - } -} - -/***************************************************************************************** -* 函数名称: DebugCmdLPConfig -* 功能描述: 低功耗参数配置 -* 参 数: argc, 输入参数数量 - argv, 输入参数 -* 返 回 值: 无 -*****************************************************************************************/ -static void DebugCmdLPConfig(int argc, char *argv[]) -{ - DBG_LOG("\r\n"); - uint16_t CollectInterval; //采集时间间隔 - uint16_t ReportInterval; //上报时间间隔 - uint8_t ERInterval; //紧急上报时间间隔 - uint8_t ERTime; //紧急上报时长 - - if(strcmp(argv[1], "?") == 0) { - DBG_LOG("Debug Cmd: lpcfg arg1 arg2 arg3 arg4\r\n"); - DBG_LOG(" brief --> Configure low-power device parameters.\r\n"); - DBG_LOG(" arg1 --> Collect interval\r\n"); - DBG_LOG(" arg2 --> Report interval\r\n"); - DBG_LOG(" arg3 --> Emergency reporting interval\r\n"); - DBG_LOG(" arg4 --> Emergency reporting time\r\n\r\n"); - return; - } - - if(argc < 5) - return; - - - CollectInterval = atoi(argv[1]); - if(CollectInterval < 30 || CollectInterval > 7200) { - DBG_LOG("CollectInterval Para Error!\r\n"); - return; - } - - ReportInterval = atoi(argv[2]); - if(ReportInterval < 5 || ReportInterval > 720) { - DBG_LOG("ReportInterval Para Error!\r\n"); - return; - } - - ERInterval = atoi(argv[3]); - if(ERInterval < 1 || ERInterval > 5) { - DBG_LOG("ERInterval Para Error!\r\n"); - return; - } - - ERTime = atoi(argv[4]); - if(ERTime < 10 || ERTime > 120) { - DBG_LOG("ERTime Para Error!\r\n"); - return; - } - - for(int i = 0; i < COMMUNIT_NUM_MAX; i++) { - if(GateWay->ConfigPara.CommUnitArray[i].RegFlag) { - GateWay->ConfigPara.CommUnitArray[i].CollectInterval = CollectInterval; - GateWay->ConfigPara.CommUnitArray[i].ReportInterval = ReportInterval; - GateWay->ConfigPara.CommUnitArray[i].ERInterval = ERInterval; - GateWay->ConfigPara.CommUnitArray[i].ERTime = ERTime; - GateWay->ConfigPara.CommUnitArray[i].ConfigFlag = true; - } - } - WritePara((uint8_t *)&GateWay->ConfigPara, sizeof(GWConfigPara_t)); - DBG_LOG("The low-power device is configured.\r\n"); -} - -/***************************************************************************************** -* 函数名称: DebugCmdLPConfig -* 功能描述: 低功耗参数配置 -* 参 数: argc, 输入参数数量 - argv, 输入参数 -* 返 回 值: 无 -*****************************************************************************************/ -static void DebugLoraConfig(int argc, char *argv[]) -{ - DBG_LOG("\r\n"); - if(argc < 2) - return; - - if(strcmp(argv[1], "?") == 0) { - DBG_LOG("Debug Cmd: Lora arg1 arg2\r\n"); - DBG_LOG(" brief --> Configure Lora parameters.\r\n"); - DBG_LOG(" arg1 --> ch: Channel--para=(0~16)\r\n"); - DBG_LOG(" pw: Power--para=(0~20)\r\n"); - DBG_LOG(" bw: SignalBw--para=(0~9)\r\n"); - DBG_LOG(" sf: SpreadFactor--para=(6~12)\r\n"); - DBG_LOG(" ec: ErrorCoding--para=(1~4)\r\n"); - DBG_LOG(" rp: RegPreamble--para=(1~32)\r\n"); - DBG_LOG(" o: on/off\r\n"); - DBG_LOG(" arg2 --> para\r\n"); - - return; - } - - if(strcmp(argv[1], "o") == 0) { - if(strcmp(argv[2], "on") == 0) { - GateWay->ConfigPara.Lora.OnOff = true; - LORA_POW_ON(); - DBG_LOG(" Lora Power On!\r\n"); - } - else if(strcmp(argv[2], "off") == 0) { - GateWay->ConfigPara.Lora.OnOff = false; - LORA_POW_OFF(); - DBG_LOG(" Lora Power Off!\r\n"); - } - } - - if(strcmp(argv[1], "ch") == 0) { - int ch = atoi(argv[2]); - if(LoraSetChannel(ch)) { - GateWay->ConfigPara.Lora.ucChannel = ch; - DBG_LOG(" Lora Channel is configured successfully!\r\n"); - } - else { - DBG_LOG("Lora Para Error!\r\n"); - return; - } - } - - if(strcmp(argv[1], "pw") == 0) { - int pow = atoi(argv[2]); - if(LoraSetPower(pow)) { - GateWay->ConfigPara.Lora.ucPower = pow; - DBG_LOG(" Lora Power is configured successfully!\r\n"); - } - else { - DBG_LOG("Lora Para Error!\r\n"); - return; - } - } - - if(strcmp(argv[1], "bw") == 0) { - int bw = atoi(argv[2]); - if(LoraSetSignalBw(bw)) { - GateWay->ConfigPara.Lora.SignalBw = bw; - DBG_LOG(" Lora SignalBw is configured successfully!\r\n"); - } - else { - DBG_LOG("Lora Para Error!\r\n"); - return; - } - } - - if(strcmp(argv[1], "sf") == 0) { - int sf = atoi(argv[2]); - if(LoraSetSpreadFactor(sf)) { - GateWay->ConfigPara.Lora.SpreadFactor = sf; - DBG_LOG(" Lora SpreadFactor is configured successfully!\r\n"); - } - else { - DBG_LOG("Lora Para Error!\r\n"); - return; - } - } - - if(strcmp(argv[1], "ec") == 0) { - int ec = atoi(argv[2]); - if(LoraSetErrorCoding(ec)) { - GateWay->ConfigPara.Lora.ErrorCoding = ec; - DBG_LOG(" Lora ErrorCoding is configured successfully!\r\n"); - } - else { - DBG_LOG("Lora Para Error!\r\n"); - return; - } - } - - if(strcmp(argv[1], "rp") == 0) { - int rp = atoi(argv[2]); - if(LoraSetRegPreamble(rp)) { - GateWay->ConfigPara.Lora.RegPreamble = rp; - DBG_LOG(" Lora RegPreamble is configured successfully!\r\n"); - } - else { - DBG_LOG("Lora Para Error!\r\n"); - return; - } - } - if(GateWay->ConfigPara.Lora.OnOff) - LoraInit(); - WritePara((uint8_t *)&GateWay->ConfigPara, sizeof(GWConfigPara_t)); - DBG_LOG("Lora reinitializes.\r\n"); -} - - -/***************************************************************************************** -* 函数名称: DebugCmdHelp -* 功能描述: 调试命令帮助信息 -* 参 数: argc, 输入参数数量 - argv, 输入参数 -* 返 回 值: 无 -*****************************************************************************************/ -void DebugCmdHelp(int argc, char *argv[]) -{ - DBG_LOG("\r\n"); - uint8_t Data[100]; - uint8_t len; - - len = strlen("main ?\r\n"); - memcpy(Data, "main ?\r\n", len); - DebugAnalyze(GateWay, Data, len); - - len = strlen("cat1 ?\r\n"); - memcpy(Data, "cat1 ?\r\n", len); - DebugAnalyze(GateWay, Data, len); - - len = strlen("rs485 ?\r\n"); - memcpy(Data, "rs485 ?\r\n", len); - DebugAnalyze(GateWay, Data, len); - - len = strlen("cudel ?\r\n"); - memcpy(Data, "cudel ?\r\n", len); - DebugAnalyze(GateWay, Data, len); - - len = strlen("culs ?\r\n"); - memcpy(Data, "culs ?\r\n", len); - DebugAnalyze(GateWay, Data, len); - - len = strlen("comm ?\r\n"); - memcpy(Data, "comm ?\r\n", len); - DebugAnalyze(GateWay, Data, len); - - len = strlen("sct ?\r\n"); - memcpy(Data, "sct ?\r\n", len); - DebugAnalyze(GateWay, Data, len); - - len = strlen("his ?\r\n"); - memcpy(Data, "his ?\r\n", len); - DebugAnalyze(GateWay, Data, len); - - len = strlen("fmt ?\r\n"); - memcpy(Data, "fmt ?\r\n", len); - DebugAnalyze(GateWay, Data, len); - - len = strlen("hinf ?\r\n"); - memcpy(Data, "hinf ?\r\n", len); - DebugAnalyze(GateWay, Data, len); - -// len = strlen("res ?\r\n"); -// memcpy(Data, "res ?\r\n", len); -// DebugAnalyze(GateWay, Data, len); - - len = strlen("sct ?\r\n"); - memcpy(Data, "sct ?\r\n", len); - DebugAnalyze(GateWay, Data, len); - - len = strlen("time ?\r\n"); - memcpy(Data, "time ?\r\n", len); - DebugAnalyze(GateWay, Data, len); - - len = strlen("svr ?\r\n"); - memcpy(Data, "svr ?\r\n", len); - DebugAnalyze(GateWay, Data, len); - - len = strlen("qs ?\r\n"); - memcpy(Data, "qs ?\r\n", len); - DebugAnalyze(GateWay, Data, len); - - len = strlen("dch ?\r\n"); - memcpy(Data, "dch ?\r\n", len); - DebugAnalyze(GateWay, Data, len); - - len = strlen("para ?\r\n"); - memcpy(Data, "para ?\r\n", len); - DebugAnalyze(GateWay, Data, len); -} - -const DBGFunType DebugFun[DEBUG_CMD_CNT] = { - "help", DebugCmdHelp, - "main", DebugCmdMainOnOff, - "cat1", DebugCmdCat1OnOff, - "rs485", DebugCmdRS485Ctrl, - "cudel", DebugCmdDelCommUnit, - "culs", DebugCmdLsCommUnit, - "comm", DebugCmdSetComm, - "sct", DebugCmdSetCollectTime, -// "his", DebugCmdReadHisData, - "fmt", DebugCmdDelHisData, - "hinf", DebugCmdGetHisInfo, -// "res", DebugCmdRestoreFactory, - "time", DebugCmdTimeSync, - "qs", DebugCmdQuerySensor, - "dch", DebugCmdSelDebugChannel, - "svr", DebugCmdSetSvr, - "mac", DebugCmdSetMac, - "para", DebugCmdGetPara, - "cali", DebugCmdCali, - "laser", DebugLaserConfig, - "lpcfg", DebugCmdLPConfig, - "lora", DebugLoraConfig, - "reboot", DebugCmdReboot, -};